Hello together, I´m trying to set up an AP with the possibility for clients to connect via wps_pbc. The AP is working so far, but when I start with debugging it told me "ctrl_iface not configured!". Has anyone a solution for that problem? Apart from this point does anyone know why I had to comment out "ieee80211n=1" and "ht_capab=[HT40][SHORT-GI-20][DSSS_CCK-40]" to get the AP running in hostapd v2.7-devel-hostap_2_6-1199-gee522d2? ########################## START QUOTE hostapd.conf interface=wlan0 #WLAN ssid=SomeSSID channel=10 hw_mode=g #ieee80211n=1 country_code=DE wmm_enabled=1 #ht_capab=[HT40][SHORT-GI-20][DSSS_CCK-40] macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_key_mgmt=WPA-PSK wpa_pairwise=CCMP rsn_pairwise=CCMP wpa_passphrase=SomePASSPHRASE #WPS configuration wpa_psk_file=/etc/hostapd/hostapd.psk #Enable control interface for PBC/PIN entry ctrl_interface=/var/run/hostapd/ ctrl_interface_group=0 #Enable internal EAP server for EAP-WSC eap_server=1 wps_state=2 ap_setup_locked=1 uuid=SomeUUID wps_pin_requests=/var/run/hostapd.pin-req device_name=Wireless AP manufacturer=Company model_name=WAP model_number=123 serial_number=12345 device_type=6-0050F204-1 os_version=01020300 config_methods=label display push_button keypad pbc_in_m1=1 ########################## END QUOTE Any kind of help is welcome. Thanks in advance for your answer. BR, JT _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
