Re: Signal strength of connected client?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1 October 2017 at 14:49, Nick <vincent@xxxxxxxxxxxx> wrote:
> is it possible to get the signal strength (rssi) of a connected station?
>
> Like:
>
>> root@LEDE:~# iwinfo wlan0 assoclist
>> xx:xx:xx:xx:xx:xx  -69 dBm / -101 dBm (SNR 32)  10 ms ago
>>     RX: 300.0 MBit/s, MCS 15, 40MHz                 1823 Pkts.
>>     TX: 6.0 MBit/s                                  1617 Pkts.

You'll get it as part of the
iw dev DEV station dump
and it's not really stricly related to the hostapd.

-- 
Rafał

_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux