Dnia sobota, 13 maja 2017 19:13:03 CEST Jouni Malinen pisze: > On Fri, May 12, 2017 at 03:44:48PM +0200, Marek Floriańczyk wrote: > > However, I after some two hours stations deauthenticate with hostapd and > > they do not authenticate again even when restarted, I need to restart > > hostapd. > > > > I have attached hostapd log file with station trying to reauthenticate > > after station restart. > > It looks like there is something broken with the driver at that point. > It does not report TX status for any of the management frames hostapd > tries to transmit and based on the station behavior, it looks like the > station does not receive these frame either. In other words, it looks > like the driver is unable to send out management frames in this state. > This would be more appropriate for someone familiar with the particular > driver to take a look at since hostapd cannot really do anything if the > driver does not send out frames or even report failures in doing so. Hi, Thanks for answer. I'm using wifi with chipset Ralink RT5370, so I assume that the problem is driver for that chipset. Would you recommend some USB based device with different chipset, maybe a newer one, which you know it can handle 100 devices ? Best Regards Marek _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
