> -----Original Message----- > From: Jouni Malinen [mailto:j@xxxxx] > Sent: Friday, December 30, 2016 23:55 > To: Otcheretianski, Andrei <andrei.otcheretianski@xxxxxxxxx> > Cc: hostap@xxxxxxxxxxxxxxxxxxx; Stern, Avraham <avraham.stern@xxxxxxxxx> > Subject: Re: [PATCH] tests: autogo: Use group control interface for GO > commands > > On Thu, Dec 29, 2016 at 11:37:58AM +0200, Andrei Otcheretianski wrote: > > The channel switch command is intended for the GO interface, but it is > > not sent on the group control interface. For configurations that use a > > separate interface for P2P groups, this will fail the test. > > > > Fix this by sending the channel switch command on the group control > > interface and waiting for the channel switch event on the global > > control interface. > > While this sounds like a reasonable change, I'd like to understand how to > reproduce this.. I don't see autogo_chan_switch failing with > mac80211_hwsim.support_p2p_device=1 nor could I get a test case with > HWSIMRadio(use_p2p_device=True)... to fail in this manner either. p2p_device isn't the issue here. The test is failing when p2p_no_group_iface is 0. Currently the default in reset() is p2p_no_group_iface = 1, but we reuse some of hwsim tests with real hw internally and use a different config. Andrei > > -- > Jouni Malinen PGP id EFC895FA _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
