Re: [PATCH] tests: autogo: Use group control interface for GO commands

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 29, 2016 at 11:37:58AM +0200, Andrei Otcheretianski wrote:
> The channel switch command is intended for the GO interface, but
> it is not sent on the group control interface. For configurations
> that use a separate interface for P2P groups, this will fail the test.
> 
> Fix this by sending the channel switch command on the group control
> interface and waiting for the channel switch event on the global
> control interface.

While this sounds like a reasonable change, I'd like to understand how
to reproduce this.. I don't see autogo_chan_switch failing with
mac80211_hwsim.support_p2p_device=1 nor could I get a test case with
HWSIMRadio(use_p2p_device=True)... to fail in this manner either.

-- 
Jouni Malinen                                            PGP id EFC895FA

_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux