On Sun, Aug 28, 2016 at 01:13:18AM +0200, Guan Xin wrote: > Switching off "require_ht" in hostapd configuration solves the problem. > > With "require_ht=1", "hostapd -d" gives the following message when > using EAP authentication: > association request: STA=00:3f:8b:xx:xx:xx capab_info=0x11 > listen_interval=2 seq_ctrl=0xa800 > WMM IE - hexdump(len=7): 00 50 f2 02 00 01 00 > Validating WMM IE: OUI 00:50:f2 OUI type 2 OUI sub-type 0 version 1 > QoS info 0x0 > wlan1: STA 00:3f:8b:xx:xx:xx IEEE 802.11: No supported rates element in AssocReq That sounds like an error in the client device. Which station was this? Does it support HT? > Their is no "No supported rates element in AssocReq" with > "require_ht=0" and everything works. > HT is still available after association. Would you be able to capture a wireless sniffer trace of the association frames exchanged between the AP and the station in such a failed case? -- Jouni Malinen PGP id EFC895FA _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
