Hello, I have configured hostapd 2.5 (did not try other versions) to provide WPA-EAP access. However, when I run either another hostapd process as a radius server on the AP, or run freeradius on another host that has a wired connection to the AP, the (radius client) hostapd does not contact the radius server. I checked this with iptraf, and saw no packet from/to port 1812. I tried to send something using netcat from the AP to port 1812 where the freeradius server is listening, and actually got a response. So I don't think this is a problem of some firewall. Actually I didn't setup any firewall on port 181*, and the AP is connected directly to the computer running freeradius with an ethernet cable. Any hints are appreciated. Thanks in advance! Guan P.S. Configuration of hostapd: ctrl_interface=/var/run/hostapd ctrl_interface_group=0 interface=wlan1 bridge=br0 driver=nl80211 hw_mode=g channel=13 ieee80211n=1 ht_capab=[SHORT-GI-20] require_ht=1 beacon_int=97 wmm_enabled=1 dtim_period=1 ap_max_inactivity=30 ssid=MySSID ignore_broadcast_ssid=0 auth_algs=1 ieee8021x=1 own_ip_addr=192.168.123.1 auth_server_addr=192.168.123.3 # or 127.0.0.1 when running on the same machine auth_server_port=1812 auth_server_shared_secret=testing123 wpa=2 wpa_key_mgmt=WPA-EAP wpa_pairwise=CCMP rsn_pairwise=CCMP # -- End of hostapd.conf -- # _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
