Sorry I think I upload a wrong log file. The right one is in the attachment.
On 10/05/16 09:18, Xue Liu wrote:
Hello
On 28/04/16 19:06, Jouni Malinen wrote:
On Thu, Apr 28, 2016 at 01:31:05PM +0200, Xue Liu wrote:
I have removed the patch and generate a new hostapd program. Then I
run the program with -d option, and there is no wpabuf overflow, but
my Nexus 9 still can not make a connection with Clearfog board via
WPS. Since the debug info is quite a lot. I put them in the
attachment. Thank you.
Thanks. This looks like something completely different. The client
device does not seem to even try to associate with the AP. It does go
through Authentication frame exchange, but then nothing.. The debug
patch should have no impact on this type of functionality, so it is a
bit difficult to say what caused this.
root@OpenWrt:~# hostapd -d hostapd.cfg
Or are you maybe running this over a slow serial port connection? If so,
there will likely be a significant extra latency on operations and it
would be better to direct the output to a file with something like
hostapd -dd hostapd.cfg > /tmp/hostapd.log
Yes. I am running hostapd over a serial port connection.
I did another test last few days and I found the problem is not in the
hostapd but in wps_supplicant. During the connection via WPS, the
wps_supplicant has "Segmentation fault". I run wpa_supplicant with
"/usr/sbin/wpa_supplicant -dd -P /var/run/wpa_supplicant-wlan0.pid -D
nl80211 -i wlan0 -c wpa_supplicant-wlan0.conf -C
/var/run/wpa_supplicant".
In addition I compile the wpad with TARGET_CFLAGS += -ggdb3. I run
"gdb /usr/sbin/wpa_supplicant" and then "run -dd -P
/var/run/wpa_supplicant-wlan0.pid -D nl80211 -i wlan0 -c
wpa_supplicant-wlan0.conf -C /var/run/wpa_supplicant“. When
segmentation fault appears after "WPS: Generate new DH keys", I run "bt".
In the attachment you can find the wpa_supplicant_gdb.log file and
wps_supplicant-wlan0.conf file. It seems that there is no useful
backtrace info.
I would like also to say that in the OpenWRT I use wpad package to
replace wpa_supplicant and hostapd. I am a newbie of it, and I don't
know what is the differences.
Regards,
Xue Liu
_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap
wpa_supplicant v2.6-devel
Successfully initialized wpa_supplicant
Initializing interface 'wlan0' conf 'wpa_supplicant-wlan0.conf' driver 'nl80211' ctrl_interface '/var/run/wpa_supplicant' bridge 'N/A'
Configuration file 'wpa_supplicant-wlan0.conf' -> '/root/wpa_supplicant-wlan0.conf'
Reading configuration file '/root/wpa_supplicant-wlan0.conf'
country='DE'
update_config=1
Line: 5 - start of a new network block
scan_ssid=1 (0x1)
ssid - hexdump_ascii(len=6):
59 75 6e 2d 41 50 Yun-AP
key_mgmt: 0x2
PSK (ASCII passphrase) - hexdump_ascii(len=8): [REMOVED]
proto: 0x2
BSSID - hexdump(len=6): 90 a2 da f0 11 7e
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
id=0 ssid='Yun-AP'
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-0f-ac:6
nl80211: Using driver-based off-channel TX
nl80211: interface wlan0 in phy phy0
nl80211: Set mode ifindex 26 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0xb6ef1b30
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xb6ef1b30 match=0801
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xb6ef1b30 match=06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xb6ef1b30 match=0a07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xb6ef1b30 match=0a11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xb6ef1b30 match=1101
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xb6ef1b30 match=1102
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xb6ef1b30 match=0505
netlink: Operstate: ifindex=26 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
nl80211: driver param='(null)'
Add interface wlan0 to a new radio phy0
nl80211: Regulatory information - country=DE (DFS-ETSI)
nl80211: 2400-2483 @ 40 MHz 20 mBm
nl80211: 5150-5250 @ 80 MHz 20 mBm (no outdoor)
nl80211: 5250-5350 @ 80 MHz 20 mBm (no outdoor) (DFS)
nl80211: 5470-5725 @ 160 MHz 27 mBm (DFS)
nl80211: 57000-66000 @ 2160 MHz 40 mBm
nl80211: Added 802.11b mode based on 802.11g information
wlan0: Own MAC address: 04:f0:21:1c:99:d9
wpa_driver_nl80211_set_key: ifindex=26 (wlan0) alg=0 addr=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=26 (wlan0) alg=0 addr=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=26 (wlan0) alg=0 addr=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=26 (wlan0) alg=0 addr=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=26 (wlan0) alg=0 addr=0 key_idx=4 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=26 (wlan0) alg=0 addr=0 key_idx=5 set_tx=0 seq_len=0 key_len=0
wlan0: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
wlan0: Setting scan request: 0.100000 sec
wlan0: WPS: UUID based on MAC address: 37edfd51-f9c2-5b59-96c5-788117303577
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Using existing control interface directory.
ctrl_iface bind(PF_UNIX) failed: Address in use
ctrl_iface exists, but does not allow connections - assuming it was leftover from forced program termination
Successfully replaced leftover ctrl_iface socket '/var/run/wpa_supplicant/wlan0'
wlan0: Added interface wlan0
wlan0: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlan0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=26 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlan0: State: DISCONNECTED -> SCANNING
Scan SSID - hexdump_ascii(len=6):
59 75 6e 2d 41 50 Yun-AP
wlan0: Starting AP scan for wildcard SSID
wlan0: Add radio work 'scan'@0xb6ec2950
wlan0: First radio work item in the queue - schedule start immediately
wlan0: Starting radio work 'scan'@0xb6ec2950 after 0.000035 second wait
wlan0: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=6):
59 75 6e 2d 41 50 Yun-AP
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
nl80211: Scan extra IEs - hexdump(len=10): 7f 08 04 00 00 00 00 00 00 40
Scan requested (ret=0) - scan timeout 10 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (47) received
wlan0: Own scan request started a scan in 0.000058 seconds
CTRL_IFACE monitor attached /tmp/wpa_ctrl_8407-20\x00
CTRL-DEBUG: ctrl_sock-sendto: sock=11 sndbuf=56623104 outq=0 send_len=3
EAPOL: disable timer tick
RTM_NEWLINK: ifi_index=26 ifname=wlan0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan probed for SSID 'Yun-AP'
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700
wlan0: Event SCAN_RESULTS (3) received
wlan0: Scan completed in 3.102238 seconds
nl80211: Received scan results (3 BSSes)
wlan0: BSS: Start scan result update 1
wlan0: BSS: Add new id 0 BSSID 04:f0:21:1c:99:da SSID 'OpenWrt-AC-WPS' freq 5560
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=0 send_len=40
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
wlan0: BSS: Add new id 1 BSSID bc:05:43:ae:14:63 SSID 'Integral' freq 2437
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=0 send_len=40
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
wlan0: BSS: Add new id 2 BSSID 90:a2:da:f0:11:7e SSID 'Yun-AP' freq 2437
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=0 send_len=40
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
BSS: last_scan_res_used=3/32
wlan0: New scan results available (own=1 ext=0)
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=0 send_len=24
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=0 send_len=21
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
WPS: AP 04:f0:21:1c:99:da type 1 added
WPS: AP bc:05:43:ae:14:63 type 0 added
WPS: AP 90:a2:da:f0:11:7e type 0 added
WPS: AP[0] 04:f0:21:1c:99:da type=1 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[1] bc:05:43:ae:14:63 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[2] 90:a2:da:f0:11:7e type=0 tries=0 last_attempt=-1 sec ago blacklist=0
wlan0: Radio work 'scan'@0xb6ec2950 done in 3.103251 seconds
wlan0: radio_work_free('scan'@0xb6ec2950: num_active_works --> 0
wlan0: Selecting BSS from priority group 0
wlan0: 0: 04:f0:21:1c:99:da ssid='OpenWrt-AC-WPS' wpa_ie_len=0 rsn_ie_len=20 caps=0x131 level=-55 freq=5560 wps
wlan0: skip - SSID mismatch
wlan0: 1: bc:05:43:ae:14:63 ssid='Integral' wpa_ie_len=22 rsn_ie_len=20 caps=0x531 level=-75 freq=2437 wps
wlan0: skip - SSID mismatch
wlan0: 2: 90:a2:da:f0:11:7e ssid='Yun-AP' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-59 freq=2437 wps
wlan0: selected based on RSN IE
wlan0: selected BSS 90:a2:da:f0:11:7e ssid='Yun-AP'
wlan0: Considering connect request: reassociate: 0 selected: 90:a2:da:f0:11:7e bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0xb6ef17f0 current_ssid=0
wlan0: Request association with 90:a2:da:f0:11:7e
wlan0: Add radio work 'sme-connect'@0xb6ec2920
wlan0: First radio work item in the queue - schedule start immediately
wlan0: Starting radio work 'sme-connect'@0xb6ec2920 after 0.000024 second wait
wlan0: Automatic auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=0 try_opportunistic=0
RSN: Search for BSSID 90:a2:da:f0:11:7e
RSN: No PMKSA cache entry found
wlan0: RSN: using IEEE 802.11i/D9.0
wlan0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
wlan0: WPA: Selected mgmt group cipher 32
wlan0: WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
wlan0: WPA: using GTK CCMP
wlan0: WPA: using PTK CCMP
wlan0: WPA: using KEY_MGMT WPA-PSK
wlan0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
RRM: Determining whether RRM can be used - device support: 0x0
RRM: No RRM in network
wlan0: Cancelling scan request
wlan0: SME: Trying to authenticate with 90:a2:da:f0:11:7e (SSID='Yun-AP' freq=2437 MHz)
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=0 send_len=80
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
wlan0: State: SCANNING -> AUTHENTICATING
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
nl80211: Authenticate (ifindex=26)
* bssid=90:a2:da:f0:11:7e
* freq=2437
* SSID - hexdump_ascii(len=6):
59 75 6e 2d 41 50 Yun-AP
* IEs - hexdump(len=0): [NULL]
* Auth Type 0
nl80211: Authentication request send successfully
nl80211: Event message available
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0
nl80211: New station 90:a2:da:f0:11:7e
nl80211: Event message available
nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlan0
nl80211: MLME event 37 (NL80211_CMD_AUTHENTICATE) on wlan0(04:f0:21:1c:99:d9) A1=04:f0:21:1c:99:d9 A2=90:a2:da:f0:11:7e
nl80211: MLME event frame - hexdump(len=30): b0 00 3a 01 04 f0 21 1c 99 d9 90 a2 da f0 11 7e 90 a2 da f0 11 7e 50 a6 00 00 02 00 00 00
nl80211: Authenticate event
wlan0: Event AUTH (11) received
wlan0: SME: Authentication response: peer=90:a2:da:f0:11:7e auth_type=0 auth_transaction=2 status_code=0
SME: Authentication response IEs - hexdump(len=0): [NULL]
wlan0: Trying to associate with 90:a2:da:f0:11:7e (SSID='Yun-AP' freq=2437 MHz)
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=0 send_len=72
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
wlan0: State: AUTHENTICATING -> ASSOCIATING
nl80211: Set wlan0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=26 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
nl80211: Associate (ifindex=26)
* bssid=90:a2:da:f0:11:7e
* freq=2437
* SSID - hexdump_ascii(len=6):
59 75 6e 2d 41 50 Yun-AP
* IEs - hexdump(len=32): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 7f 08 04 00 00 00 00 00 00 40
* WPA Versions 0x2
* pairwise=0xfac04
* group=0xfac04
* akm=0xfac02
nl80211: Association request send successfully
l2_packet_receive: src=90:a2:da:f0:11:7e len=99
wlan0: RX EAPOL from 90:a2:da:f0:11:7e
RX EAPOL - hexdump(len=99): 02 03 00 5f 02 00 8a 00 10 00 00 00 00 00 00 00 01 3d ef 84 c7 eb 9f 74 36 c1 d6 a9 16 61 d9 98 99 66 06 35 ed 7c b9 ee 23 f9 35 22 4c b8 d0 f4 c5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wlan0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
RTM_NEWLINK: ifi_index=26 ifname=wlan0 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK: ifi_index=26 ifname=wlan0 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK: ifi_index=26 ifname=wlan0 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
nl80211: Event message available
nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlan0
nl80211: MLME event 38 (NL80211_CMD_ASSOCIATE) on wlan0(04:f0:21:1c:99:d9) A1=04:f0:21:1c:99:d9 A2=90:a2:da:f0:11:7e
nl80211: MLME event frame - hexdump(len=134): 10 00 3a 01 04 f0 21 1c 99 d9 90 a2 da f0 11 7e 90 a2 da f0 11 7e 60 a6 31 04 00 00 03 c0 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c 2d 1a 6e 11 1b ff 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 06 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 00 00 00 00 00 00 00 40 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00
nl80211: Associate event
wlan0: Event ASSOC (0) received
wlan0: Association info event
resp_ies - hexdump(len=104): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c 2d 1a 6e 11 1b ff 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 06 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 00 00 00 00 00 00 00 40 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00
wlan0: freq=2437 MHz
FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
wlan0: State: ASSOCIATING -> ASSOCIATED
nl80211: Set wlan0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=26 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlan0: Associated to a new BSS: BSSID=90:a2:da:f0:11:7e
wlan0: Associated with 90:a2:da:f0:11:7e
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=0 send_len=33
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
wlan0: WPA: Association event - clear replay counter
wlan0: WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: enable timer tick
EAPOL: SUPP_BE entering state IDLE
wlan0: Setting authentication timeout: 10 sec 0 usec
wlan0: Cancelling scan request
wlan0: Process pending EAPOL frame that was received just before association notification
wlan0: RX EAPOL from 90:a2:da:f0:11:7e
RX EAPOL - hexdump(len=99): 02 03 00 5f 02 00 8a 00 10 00 00 00 00 00 00 00 01 3d ef 84 c7 eb 9f 74 36 c1 d6 a9 16 61 d9 98 99 66 06 35 ed 7c b9 ee 23 f9 35 22 4c b8 d0 f4 c5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wlan0: Setting authentication timeout: 10 sec 0 usec
wlan0: IEEE 802.1X RX: version=2 type=3 length=95
WPA: RX EAPOL-Key - hexdump(len=99): 02 03 00 5f 02 00 8a 00 10 00 00 00 00 00 00 00 01 3d ef 84 c7 eb 9f 74 36 c1 d6 a9 16 61 d9 98 99 66 06 35 ed 7c b9 ee 23 f9 35 22 4c b8 d0 f4 c5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wlan0: EAPOL-Key type=2
wlan0: key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
wlan0: key_length=16 key_data_length=0
replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01
key_nonce - hexdump(len=32): 3d ef 84 c7 eb 9f 74 36 c1 d6 a9 16 61 d9 98 99 66 06 35 ed 7c b9 ee 23 f9 35 22 4c b8 d0 f4 c5
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
wlan0: State: ASSOCIATED -> 4WAY_HANDSHAKE
wlan0: WPA: RX message 1 of 4-Way Handshake from 90:a2:da:f0:11:7e (ver=2)
RSN: msg 1/4 key data - hexdump(len=0):
WPA: Renewed SNonce - hexdump(len=32): 44 cb 1b 21 1b 8d 10 1a 69 8f be b4 0f 85 2b b4 b8 ec 90 10 b1 00 d2 09 9e 72 1d ea 70 ed a3 94
WPA: PTK derivation - A1=04:f0:21:1c:99:d9 A2=90:a2:da:f0:11:7e
WPA: Nonce1 - hexdump(len=32): 44 cb 1b 21 1b 8d 10 1a 69 8f be b4 0f 85 2b b4 b8 ec 90 10 b1 00 d2 09 9e 72 1d ea 70 ed a3 94
WPA: Nonce2 - hexdump(len=32): 3d ef 84 c7 eb 9f 74 36 c1 d6 a9 16 61 d9 98 99 66 06 35 ed 7c b9 ee 23 f9 35 22 4c b8 d0 f4 c5
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=48): [REMOVED]
WPA: KCK - hexdump(len=16): [REMOVED]
WPA: KEK - hexdump(len=16): [REMOVED]
WPA: TK - hexdump(len=16): [REMOVED]
WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 01
wlan0: WPA: Sending EAPOL-Key 2/4
WPA: KCK - hexdump(len=16): [REMOVED]
WPA: Derived Key MIC - hexdump(len=16): 40 da 57 41 ca 42 2c c0 95 d4 05 a6 17 5f 77 73
WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 01 44 cb 1b 21 1b 8d 10 1a 69 8f be b4 0f 85 2b b4 b8 ec 90 10 b1 00 d2 09 9e 72 1d ea 70 ed a3 94 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 da 57 41 ca 42 2c c0 95 d4 05 a6 17 5f 77 73 00 16 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WMM AC: AC mandatory: AC_BE=0 AC_BK=0 AC_VI=0 AC_VO=0
WMM AC: U-APSD queues=0x0
WMM AC: Valid WMM association, WMM AC is enabled
wlan0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=448 send_len=40
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
nl80211: Event message available
nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlan0
nl80211: Ignore connect event (cmd=46) when using userspace SME
l2_packet_receive: src=90:a2:da:f0:11:7e len=155
wlan0: RX EAPOL from 90:a2:da:f0:11:7e
RX EAPOL - hexdump(len=155): 02 03 00 97 02 13 ca 00 10 00 00 00 00 00 00 00 02 3d ef 84 c7 eb 9f 74 36 c1 d6 a9 16 61 d9 98 99 66 06 35 ed 7c b9 ee 23 f9 35 22 4c b8 d0 f4 c5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9a 5e 20 75 c7 22 8f 31 ea b3 7b 9e 43 e7 59 73 00 38 36 fa c2 d2 46 8f 0f ca 0c 40 34 5c 5f 6d 1e 39 aa b2 8c 47 2a 80 cb f3 fb 98 35 fb 6b 65 6a 39 5d 7c ed d6 5e 07 51 db 3f ad 84 9b a1 fd 1a 0b 26 1b 5f 9b dd e3 00 66
wlan0: IEEE 802.1X RX: version=2 type=3 length=151
WPA: RX EAPOL-Key - hexdump(len=155): 02 03 00 97 02 13 ca 00 10 00 00 00 00 00 00 00 02 3d ef 84 c7 eb 9f 74 36 c1 d6 a9 16 61 d9 98 99 66 06 35 ed 7c b9 ee 23 f9 35 22 4c b8 d0 f4 c5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9a 5e 20 75 c7 22 8f 31 ea b3 7b 9e 43 e7 59 73 00 38 36 fa c2 d2 46 8f 0f ca 0c 40 34 5c 5f 6d 1e 39 aa b2 8c 47 2a 80 cb f3 fb 98 35 fb 6b 65 6a 39 5d 7c ed d6 5e 07 51 db 3f ad 84 9b a1 fd 1a 0b 26 1b 5f 9b dd e3 00 66
wlan0: EAPOL-Key type=2
wlan0: key_info 0x13ca (ver=2 keyidx=0 rsvd=0 Pairwise Install Ack MIC Secure Encr)
wlan0: key_length=16 key_data_length=56
replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 02
key_nonce - hexdump(len=32): 3d ef 84 c7 eb 9f 74 36 c1 d6 a9 16 61 d9 98 99 66 06 35 ed 7c b9 ee 23 f9 35 22 4c b8 d0 f4 c5
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): fc 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 9a 5e 20 75 c7 22 8f 31 ea b3 7b 9e 43 e7 59 73
RSN: encrypted key data - hexdump(len=56): 36 fa c2 d2 46 8f 0f ca 0c 40 34 5c 5f 6d 1e 39 aa b2 8c 47 2a 80 cb f3 fb 98 35 fb 6b 65 6a 39 5d 7c ed d6 5e 07 51 db 3f ad 84 9b a1 fd 1a 0b 26 1b 5f 9b dd e3 00 66
WPA: decrypted EAPOL-Key key data - hexdump(len=48): [REMOVED]
wlan0: State: 4WAY_HANDSHAKE -> 4WAY_HANDSHAKE
wlan0: WPA: RX message 3 of 4-Way Handshake from 90:a2:da:f0:11:7e (ver=2)
WPA: IE KeyData - hexdump(len=48): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00 dd 16 00 0f ac 01 02 00 0d 0a a4 c5 b2 17 8d 07 ea 3f b3 0d 46 4d 64 8f dd 00
WPA: RSN IE in EAPOL-Key - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 0c 00
WPA: GTK in EAPOL-Key - hexdump(len=24): [REMOVED]
wlan0: WPA: Sending EAPOL-Key 4/4
WPA: KCK - hexdump(len=16): [REMOVED]
WPA: Derived Key MIC - hexdump(len=16): aa 6f a7 45 4a 3a b7 02 b3 52 5f 33 51 2a 77 9e
WPA: TX EAPOL-Key - hexdump(len=99): 01 03 00 5f 02 03 0a 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 aa 6f a7 45 4a 3a b7 02 b3 52 5f 33 51 2a 77 9e 00 00
wlan0: WPA: Installing PTK to the driver
wpa_driver_nl80211_set_key: ifindex=26 (wlan0) alg=3 addr=0xb6ef1e40 key_idx=0 set_tx=1 seq_len=6 key_len=16
nl80211: KEY_DATA - hexdump(len=16): [REMOVED]
nl80211: KEY_SEQ - hexdump(len=6): 00 00 00 00 00 00
addr=90:a2:da:f0:11:7e
EAPOL: External notification - portValid=1
wlan0: State: 4WAY_HANDSHAKE -> GROUP_HANDSHAKE
RSN: received GTK in pairwise handshake - hexdump(len=18): [REMOVED]
WPA: Group Key - hexdump(len=16): [REMOVED]
wlan0: WPA: Installing GTK to the driver (keyidx=2 tx=0 len=16)
WPA: RSC - hexdump(len=6): fc 00 00 00 00 00
wpa_driver_nl80211_set_key: ifindex=26 (wlan0) alg=3 addr=0xe93e8 key_idx=2 set_tx=0 seq_len=6 key_len=16
nl80211: KEY_DATA - hexdump(len=16): [REMOVED]
nl80211: KEY_SEQ - hexdump(len=6): fc 00 00 00 00 00
broadcast key
wlan0: WPA: Key negotiation completed with 90:a2:da:f0:11:7e [PTK=CCMP GTK=CCMP]
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=0 send_len=73
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
wlan0: Cancelling authentication timeout
wlan0: State: GROUP_HANDSHAKE -> COMPLETED
wlan0: Radio work 'sme-connect'@0xb6ec2920 done in 0.057629 seconds
wlan0: radio_work_free('sme-connect'@0xb6ec2920: num_active_works --> 0
wlan0: CTRL-EVENT-CONNECTED - Connection to 90:a2:da:f0:11:7e completed [id=0 id_str=]
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=704 send_len=79
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
nl80211: Set wlan0 operstate 0->1 (UP)
netlink: Operstate: ifindex=26 linkmode=-1 (no change), operstate=6 (IF_OPER_UP)
EAPOL: External notification - portValid=1
EAPOL: External notification - EAP success=1
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state SUCCESS
EAP: EAP entering state DISABLED
EAPOL: SUPP_PAE entering state AUTHENTICATED
EAPOL: Supplicant port status: Authorized
nl80211: Set supplicant port authorized for 90:a2:da:f0:11:7e
EAPOL: SUPP_BE entering state IDLE
EAPOL authentication completed - result=SUCCESS
nl80211: Set rekey offload
nl80211: Driver does not support rekey offload
RTM_NEWLINK: ifi_index=26 ifname=wlan0 operstate=6 linkmode=1 ifi_family=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
EAPOL: startWhen --> 0
EAPOL: disable timer tick
wlan0: Control interface command 'WPS_PBC'
key_mgmt: 0x200
eap methods - hexdump(len=16): 2a 37 00 00 01 00 00 00 00 00 00 00 00 00 00 00
identity - hexdump_ascii(len=29):
57 46 41 2d 53 69 6d 70 6c 65 43 6f 6e 66 69 67 WFA-SimpleConfig
2d 45 6e 72 6f 6c 6c 65 65 2d 31 2d 30 -Enrollee-1-0
phase1 - hexdump_ascii(len=5):
70 62 63 3d 31 pbc=1
wlan0: Request to deauthenticate - bssid=90:a2:da:f0:11:7e pending_bssid=00:00:00:00:00:00 reason=3 state=COMPLETED
wpa_driver_nl80211_deauthenticate(addr=90:a2:da:f0:11:7e reason_code=3)
wlan0: Event DEAUTH (12) received
wlan0: Deauthentication notification
wlan0: * reason 3 (locally generated)
Deauthentication frame IE(s) - hexdump(len=0): [NULL]
wlan0: CTRL-EVENT-DISCONNECTED bssid=90:a2:da:f0:11:7e reason=3 locally_generated=1
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=0 send_len=76
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
wlan0: Auto connect enabled: try to reconnect (wps=0/1 wpa_state=9)
wlan0: Setting scan request: 0.100000 sec
wlan0: Ignore connection failure due to local request to disconnect
wlan0: WPA: Clear old PMK and PTK
wlan0: Disconnect event - remove keys
wpa_driver_nl80211_set_key: ifindex=26 (wlan0) alg=0 addr=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=26 (wlan0) alg=0 addr=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=26 (wlan0) alg=0 addr=0xb6f7270c key_idx=0 set_tx=0 seq_len=0 key_len=0
addr=90:a2:da:f0:11:7e
wlan0: State: COMPLETED -> DISCONNECTED
nl80211: Set wlan0 operstate 1->0 (DORMANT)
netlink: Operstate: ifindex=26 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
WMM AC: WMM AC is disabled
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
wlan0: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlan0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=26 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wlan0: Rescheduling scan request: 0.000000 sec
CTRL-DEBUG: ctrl_sock-sendto: sock=11 sndbuf=56623104 outq=704 send_len=3
wlan0: State: DISCONNECTED -> SCANNING
wlan0: Starting AP scan for wildcard SSID
WPS: Building WPS IE for Probe Request
WPS: * Version (hardcoded 0x10)
WPS: * Request Type
WPS: * Config Methods (2108)
WPS: * UUID-E
WPS: * Primary Device Type
WPS: * RF Bands (3)
WPS: * Association State
WPS: * Configuration Error (0)
WPS: * Device Password ID (4)
WPS: * Manufacturer
WPS: * Model Name
WPS: * Model Number
WPS: * Device Name
WPS: * Version2 (0x20)
WPS: * Request to Enroll (1)
wlan0: Add radio work 'scan'@0xb6ec2ee0
wlan0: First radio work item in the queue - schedule start immediately
RTM_NEWLINK: ifi_index=26 ifname=wlan0 operstate=2 linkmode=1 ifi_family=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK: ifi_index=26 ifname=wlan0 wext ifi_family=0 ifi_flags=0x1043 ([UP][RUNNING])
nl80211: Event message available
nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlan0
nl80211: Delete station 90:a2:da:f0:11:7e
wlan0: Starting radio work 'scan'@0xb6ec2ee0 after 0.000121 second wait
wlan0: nl80211: scan request
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
nl80211: Scan extra IEs - hexdump(len=120): 7f 08 04 00 00 00 00 00 00 40 dd 6c 00 50 f2 04 10 4a 00 01 10 10 3a 00 01 01 10 08 00 02 21 08 10 47 00 10 37 ed fd 51 f9 c2 5b 59 96 c5 78 81 17 30 35 77 10 54 00 08 00 00 00 00 00 00 00 00 10 3c 00 01 03 10 02 00 02 00 00 10 09 00 02 00 00 10 12 00 02 00 04 10 21 00 01 20 10 23 00 01 20 10 24 00 01 20 10 11 00 01 20 10 49 00 09 00 37 2a 00 01 20 03 01 01
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 39 (NL80211_CMD_DEAUTHENTICATE) received for wlan0
nl80211: MLME event 39 (NL80211_CMD_DEAUTHENTICATE) on wlan0(04:f0:21:1c:99:d9) A1=90:a2:da:f0:11:7e A2=04:f0:21:1c:99:d9
nl80211: MLME event frame - hexdump(len=26): c0 00 00 00 90 a2 da f0 11 7e 04 f0 21 1c 99 d9 90 a2 da f0 11 7e 00 00 03 00
nl80211: Deauthenticate event
nl80211: Ignore deauth event triggered due to own deauth request
nl80211: Event message available
nl80211: Drv Event 48 (NL80211_CMD_DISCONNECT) received for wlan0
nl80211: Ignore disconnect event when using userspace SME
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (47) received
wlan0: Own scan request started a scan in 0.000186 seconds
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=0 send_len=24
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700
wlan0: Event SCAN_RESULTS (3) received
wlan0: Scan completed in 3.102046 seconds
nl80211: Received scan results (2 BSSes)
wlan0: WPS: Order scan results with WPS provisioning rules
wlan0: BSS: Start scan result update 2
BSS: last_scan_res_used=2/32
wlan0: New scan results available (own=1 ext=0)
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=0 send_len=24
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=448 send_len=21
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
WPS: AP 04:f0:21:1c:99:da type 1 added
WPS: AP 90:a2:da:f0:11:7e type 0 added
WPS: AP[0] 04:f0:21:1c:99:da type=1 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[1] 90:a2:da:f0:11:7e type=0 tries=0 last_attempt=-1 sec ago blacklist=0
wlan0: Radio work 'scan'@0xb6ec2ee0 done in 3.102953 seconds
wlan0: radio_work_free('scan'@0xb6ec2ee0: num_active_works --> 0
wlan0: Selecting BSS from priority group 0
wlan0: 0: 04:f0:21:1c:99:da ssid='OpenWrt-AC-WPS' wpa_ie_len=0 rsn_ie_len=20 caps=0x131 level=-55 freq=5560 wps
wlan0: skip - disabled
selected based on WPS IE (Active PBC)
wlan0: selected BSS 04:f0:21:1c:99:da ssid='OpenWrt-AC-WPS'
WPS: Check whether PBC session overlap is present in scan results; selected BSSID 04:f0:21:1c:99:da
WPS: UUID of the selected BSS - hexdump(len=16): 68 82 a8 2e e9 41 54 20 9a fc 0c 67 a0 e0 8d b0
wlan0: Considering connect request: reassociate: 1 selected: 04:f0:21:1c:99:da bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0xb6ed8180 current_ssid=0
wlan0: Request association with 04:f0:21:1c:99:da
wlan0: Add radio work 'sme-connect'@0xb6ec2e80
wlan0: First radio work item in the queue - schedule start immediately
wlan0: Starting radio work 'sme-connect'@0xb6ec2e80 after 0.000025 second wait
wlan0: Automatic auth_alg selection: 0x1
WPS: Building WPS IE for (Re)Association Request
WPS: * Version (hardcoded 0x10)
WPS: * Request Type
WPS: * Version2 (0x20)
wlan0: WPA: clearing AP WPA IE
wlan0: WPA: clearing AP RSN IE
wlan0: WPA: clearing own WPA/RSN IE
FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
RRM: Determining whether RRM can be used - device support: 0x0
RRM: No RRM in network
wlan0: Cancelling scan request
wlan0: SME: Trying to authenticate with 04:f0:21:1c:99:da (SSID='OpenWrt-AC-WPS' freq=5560 MHz)
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=896 send_len=88
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
wlan0: State: SCANNING -> AUTHENTICATING
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
nl80211: Authenticate (ifindex=26)
* bssid=04:f0:21:1c:99:da
* freq=5560
* SSID - hexdump_ascii(len=14):
4f 70 65 6e 57 72 74 2d 41 43 2d 57 50 53 OpenWrt-AC-WPS
* IEs - hexdump(len=0): [NULL]
* Auth Type 0
nl80211: Authentication request send successfully
RTM_NEWLINK: ifi_index=26 ifname=wlan0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Event message available
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlan0
nl80211: New station 04:f0:21:1c:99:da
nl80211: Event message available
nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlan0
nl80211: MLME event 37 (NL80211_CMD_AUTHENTICATE) on wlan0(04:f0:21:1c:99:d9) A1=04:f0:21:1c:99:d9 A2=04:f0:21:1c:99:da
nl80211: MLME event frame - hexdump(len=30): b0 00 3c 00 04 f0 21 1c 99 d9 04 f0 21 1c 99 da 04 f0 21 1c 99 da e0 df 00 00 02 00 00 00
nl80211: Authenticate event
wlan0: Event AUTH (11) received
wlan0: SME: Authentication response: peer=04:f0:21:1c:99:da auth_type=0 auth_transaction=2 status_code=0
SME: Authentication response IEs - hexdump(len=0): [NULL]
wlan0: Trying to associate with 04:f0:21:1c:99:da (SSID='OpenWrt-AC-WPS' freq=5560 MHz)
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=0 send_len=80
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
wlan0: State: AUTHENTICATING -> ASSOCIATING
nl80211: Set wlan0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=26 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlan0: WPA: clearing own WPA/RSN IE
nl80211: Associate (ifindex=26)
* bssid=04:f0:21:1c:99:da
* freq=5560
* SSID - hexdump_ascii(len=14):
4f 70 65 6e 57 72 74 2d 41 43 2d 57 50 53 OpenWrt-AC-WPS
* IEs - hexdump(len=36): 7f 08 04 00 00 00 00 00 00 40 dd 18 00 50 f2 04 10 4a 00 01 10 10 3a 00 01 01 10 49 00 06 00 37 2a 00 01 20
* WPA Versions 0x2
nl80211: Association request send successfully
l2_packet_receive: src=04:f0:21:1c:99:da len=9
wlan0: RX EAPOL from 04:f0:21:1c:99:da
RX EAPOL - hexdump(len=9): 02 00 00 05 01 82 00 05 01
wlan0: Not associated - Delay processing of received EAPOL frame (state=ASSOCIATING bssid=00:00:00:00:00:00)
RTM_NEWLINK: ifi_index=26 ifname=wlan0 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK: ifi_index=26 ifname=wlan0 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK: ifi_index=26 ifname=wlan0 wext ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
nl80211: Event message available
nl80211: Drv Event 38 (NL80211_CMD_ASSOCIATE) received for wlan0
nl80211: MLME event 38 (NL80211_CMD_ASSOCIATE) on wlan0(04:f0:21:1c:99:d9) A1=04:f0:21:1c:99:d9 A2=04:f0:21:1c:99:da
nl80211: MLME event frame - hexdump(len=154): 10 00 3c 00 04 f0 21 1c 99 d9 04 f0 21 1c 99 da 04 f0 21 1c 99 da f0 df 11 01 00 00 01 c0 01 08 8c 12 98 24 b0 48 60 6c 2d 1a ef 09 1b ff ff ff 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 70 07 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 00 00 00 00 00 40 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 18 00 50 f2 04 10 4a 00 01 10 10 3b 00 01 03 10 49 00 06 00 37 2a 00 01 20
nl80211: Associate event
wlan0: Event ASSOC (0) received
wlan0: Association info event
resp_ies - hexdump(len=124): 01 08 8c 12 98 24 b0 48 60 6c 2d 1a ef 09 1b ff ff ff 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 3d 16 70 07 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f 08 04 00 00 00 00 00 00 40 dd 18 00 50 f2 02 01 01 80 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00 dd 18 00 50 f2 04 10 4a 00 01 10 10 3b 00 01 03 10 49 00 06 00 37 2a 00 01 20
wlan0: freq=5560 MHz
FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
wlan0: State: ASSOCIATING -> ASSOCIATED
nl80211: Set wlan0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=26 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
wlan0: Associated to a new BSS: BSSID=04:f0:21:1c:99:da
wlan0: Associated with 04:f0:21:1c:99:da
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=0 send_len=33
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
wlan0: WPA: Association event - clear replay counter
wlan0: WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: enable timer tick
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
wlan0: Setting authentication timeout: 10 sec 0 usec
wlan0: Cancelling scan request
wlan0: Process pending EAPOL frame that was received just before association notification
wlan0: RX EAPOL from 04:f0:21:1c:99:da
RX EAPOL - hexdump(len=9): 02 00 00 05 01 82 00 05 01
wlan0: Setting authentication timeout: 70 sec 0 usec
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_PAE entering state RESTART
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=130 method=1 vendor=0 vendorMethod=0
EAP: EAP entering state IDENTITY
wlan0: CTRL-EVENT-EAP-STARTED EAP authentication started
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=448 send_len=49
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
EAP: Status notification: started (param=)
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=896 send_len=51
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
EAP: EAP-Request Identity data - hexdump_ascii(len=0):
EAP: using real identity - hexdump_ascii(len=29):
57 46 41 2d 53 69 6d 70 6c 65 43 6f 6e 66 69 67 WFA-SimpleConfig
2d 45 6e 72 6f 6c 6c 65 65 2d 31 2d 30 -Enrollee-1-0
EAP: EAP entering state SEND_RESPONSE
EAP: EAP entering state IDLE
EAPOL: SUPP_BE entering state RESPONSE
EAPOL: txSuppRsp
TX EAPOL: dst=04:f0:21:1c:99:da
TX EAPOL - hexdump(len=38): 01 00 00 22 02 82 00 22 01 57 46 41 2d 53 69 6d 70 6c 65 43 6f 6e 66 69 67 2d 45 6e 72 6f 6c 6c 65 65 2d 31 2d 30
EAPOL: SUPP_BE entering state RECEIVE
WMM AC: AC mandatory: AC_BE=0 AC_BK=0 AC_VI=0 AC_VO=0
WMM AC: U-APSD queues=0x0
WMM AC: Valid WMM association, WMM AC is enabled
wlan0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=1344 send_len=40
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
nl80211: Event message available
nl80211: Drv Event 46 (NL80211_CMD_CONNECT) received for wlan0
nl80211: Ignore connect event (cmd=46) when using userspace SME
l2_packet_receive: src=04:f0:21:1c:99:da len=18
wlan0: RX EAPOL from 04:f0:21:1c:99:da
RX EAPOL - hexdump(len=18): 02 00 00 0e 01 83 00 0e fe 00 37 2a 00 00 00 01 01 00
EAPOL: Received EAP-Packet frame
EAPOL: SUPP_BE entering state REQUEST
EAPOL: getSuppRsp
EAP: EAP entering state RECEIVED
EAP: Received EAP-Request id=131 method=254 vendor=14122 vendorMethod=1
EAP: EAP entering state GET_METHOD
wlan0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=14122 method=1
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=0 send_len=52
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
EAP: Status notification: accept proposed method (param=WSC)
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=448 send_len=69
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
EAP: Initialize selected EAP method: vendor 14122 method 1 (WSC)
EAP-WSC: Fragment size limit 1398
wlan0: CTRL-EVENT-EAP-METHOD EAP vendor 14122 method 1 (WSC) selected
CTRL-DEBUG: ctrl_sock-sendmsg: sock=11 sndbuf=56623104 outq=1152 send_len=62
CTRL_IFACE monitor sent successfully to /tmp/wpa_ctrl_8407-20\x00
EAP: EAP entering state METHOD
EAP-WSC: Received packet: Op-Code 1 Flags 0x0 Message Length 0
EAP-WSC: Received start
EAP-WSC: WAIT_START -> MESG
WPS: Enrollee Nonce - hexdump(len=16): 81 9e 33 59 93 20 44 2e b3 6f d4 4f 4c 0f ca 7e
WPS: Building Message M1
WPS: * Version (hardcoded 0x10)
WPS: * Message Type (4)
WPS: * UUID-E
WPS: * MAC Address (04:f0:21:1c:99:d9)
WPS: * Enrollee Nonce
WPS: * Public Key
WPS: Generate new DH keys
Program received signal SIGSEGV, Segmentation fault.
0x00039184 in ?? ()
(gdb) bt
#0 0x00039184 in ?? ()
#1 0x000889e8 in ?? ()
Backtrace stopped: previous frame identical to this frame (corrupt stack?)
_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap
