On Fri, Mar 18, 2016 at 05:13:28PM +0100, Jose Blanquicet wrote: > I am using the Marvell driver sd8887 without any particular wpa_supplicant > configuration. > > I also agree that your fix is more appropriated. I tried it and it > works also with > Marvell driver. Thanks. > I think that mac80211_hwsim does not take into account > smps_mode parameter when ht is disabled, which is right. But instead, > Marvell driver and maybe others report error -22 (Invalid argument) if they > receive smps_mode and it is set to a value different than OFF; of course > when disable_ht=1. Well, wpa_supplicant should not really be adding this attribute in such a case and I'll push in the fix for that. > On the other hand, I would like to make a question (I do not know if it should > be done in another discussion, if so let me know and I will create a new one). > The fact is that I have been able to use a, g, n and ac 802.11 modes but not > b. I get 802.11n or ac using disable_ht and disable_vht parameters. > Additionally, if I disable both parameters I get 802.11g mode and if I also set > frequency to a channel in 5GHz I get 802.11a mode. But I do not know how > to properly set the network parameters to enable 802.11b mode. How can I > do this? I don't think wpa_supplicant supports this. You can use hostapd to be configure AP with hw_mode=b if you need to configure this special (i.e., obsolete..) case. -- Jouni Malinen PGP id EFC895FA _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
