Re: Disabling SMPS (Spatial multiplexing power save) when 802.11n is not used

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Mar 18, 2016 at 02:11:13PM +0100, Jose Blanquicet wrote:
> You are probably right, the problem could be that smps attribute is added
> without verify if it is going to do HT. In function wpa_driver_nl80211_set_ap:
> 
> if (nla_put_u32(msg, NL80211_ATTR_SMPS_MODE, smps_mode))
>            goto fail;
> 
> When I set it to HT_CAP_INFO_SMPS_DISABLED, nl80211 shoul ignore it
> and that's the reason why it works.

Which driver are you using when testing this and what kind of
wpa_supplicant configuration? I was unable to reproduce the error
message with mac80211_hwsim, i.e., the AP did come up with HT disabled
when configuring the network with disable_ht=1.

That said, the attribute should not be there and the proper fix would
likely look like this:


diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c
index 5fb6652..b4c3462 100644
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -3526,24 +3526,26 @@ static int wpa_driver_nl80211_set_ap(void *priv,
 	    nla_put_u32(msg, NL80211_ATTR_CIPHER_SUITE_GROUP, suite))
 		goto fail;
 
-	switch (params->smps_mode) {
-	case HT_CAP_INFO_SMPS_DYNAMIC:
-		wpa_printf(MSG_DEBUG, "nl80211: SMPS mode - dynamic");
-		smps_mode = NL80211_SMPS_DYNAMIC;
-		break;
-	case HT_CAP_INFO_SMPS_STATIC:
-		wpa_printf(MSG_DEBUG, "nl80211: SMPS mode - static");
-		smps_mode = NL80211_SMPS_STATIC;
-		break;
-	default:
-		/* invalid - fallback to smps off */
-	case HT_CAP_INFO_SMPS_DISABLED:
-		wpa_printf(MSG_DEBUG, "nl80211: SMPS mode - off");
-		smps_mode = NL80211_SMPS_OFF;
-		break;
+	if (params->ht_opmode != -1) {
+		switch (params->smps_mode) {
+		case HT_CAP_INFO_SMPS_DYNAMIC:
+			wpa_printf(MSG_DEBUG, "nl80211: SMPS mode - dynamic");
+			smps_mode = NL80211_SMPS_DYNAMIC;
+			break;
+		case HT_CAP_INFO_SMPS_STATIC:
+			wpa_printf(MSG_DEBUG, "nl80211: SMPS mode - static");
+			smps_mode = NL80211_SMPS_STATIC;
+			break;
+		default:
+			/* invalid - fallback to smps off */
+		case HT_CAP_INFO_SMPS_DISABLED:
+			wpa_printf(MSG_DEBUG, "nl80211: SMPS mode - off");
+			smps_mode = NL80211_SMPS_OFF;
+			break;
+		}
+		if (nla_put_u32(msg, NL80211_ATTR_SMPS_MODE, smps_mode))
+			goto fail;
 	}
-	if (nla_put_u32(msg, NL80211_ATTR_SMPS_MODE, smps_mode))
-		goto fail;
 
 	if (params->beacon_ies) {
 		wpa_hexdump_buf(MSG_DEBUG, "nl80211: beacon_ies",


-- 
Jouni Malinen                                            PGP id EFC895FA

_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux