On Fri, Feb 19, 2016 at 03:01:25PM +0100, Benoit wrote: > I realized than when it is working (same hostapd.conf, difference is > running hostapd from compiled from source or from package manager) Which version of hostapd is working and which one is failing? Which kernel driver and version are you using? > I realise now that I don't have the > pnic_wlan: Event EAPOL_RX (24) received > > So the station tries until reaching timeout.. > Is there anything I should activate on my .config which is not > activated by default on the source to make the authentication > through EAPOL ? There is no build parameter needed for this, i.e., that should work regardless of how the build is configured. Do you have the main netdev in a bridge? Lack of the EAPOL_RX events would imply that there are some issues in delivering the received EAPOL frames to hostapd. -- Jouni Malinen PGP id EFC895FA _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
