Hello, We have a device running wpa_supplicant that connects to another device running hostapd. When the wpa_supplicant device is getting a bad signal, we have a problem where after it has disconnected for a second or two it takes 5 seconds to much more to reconnect to the hostapd device. However, if we restart wpa_supplicant, it will reconnect very quickly. Since the device only connects to a single other device (with a known ssid), is there a way we can increase the disconnect threshold so it never actually disconnects even when the other device is way out of range (and will still send packets/attempt to receive packets from it)? We have tried setting the wireless sensitivity value via "iwconfig wlan0 sens -65" but this is not enabled (we're using an ath5k driver). Thanks, Roger _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap