Re: [CONF] enable 802.11AC in hostapd

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 17, 2015 at 05:45:45PM +0100, Alexandre Epert wrote:
> wlan1: IEEE 802.11 Configured channel (36) not found from the channel list of current mode (0) IEEE 802.11b

hw_mode was not set correctly.

> Here is my hostapd.conf file :
> 
> interface=wlan1
> bridge=br0
> #hw_mode=a
> channel=36

Why was that hw_mode commented out? Uncommenting that should resolve the
issue.

-- 
Jouni Malinen                                            PGP id EFC895FA

_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux