Hi Felipe,
After getting error in configuring gstreamer i have given
following command to re configure and i am successful in re configuration.
# sb2
./configure --prefix=/opt/gstreamer_beagle/ --disable-nls --disable-static --enable-binary-registry
--disable-loadsave --with-html-dir=/tmp/dump --with-pkg-config-path=/opt/gstreamer_beagle/lib/pkgconfig/
After that when i give make install command it gives me
following error.
[root at Fedora gstreamer-0.10.25]# sb2 make install
Making install in pkgconfig
/usr/bin/install -c -m 644 'gstreamer-0.10.pc'
'/opt/gstreamer_beagle/lib/pkgconfig/gstreamer-0.10.pc'
/usr/bin/install -c -m 644 'gstreamer-base-0.10.pc'
'/opt/gstreamer_beagle/lib/pkgconfig/gstreamer-base-0.10.pc'
/usr/bin/install -c -m 644 'gstreamer-check-0.10.pc'
'/opt/gstreamer_beagle/lib/pkgconfig/gstreamer-check-0.10.pc'
/usr/bin/install -c -m 644 'gstreamer-controller-0.10.pc'
'/opt/gstreamer_beagle/lib/pkgconfig/gstreamer-controller-0.10.pc'
/usr/bin/install -c -m 644 'gstreamer-dataprotocol-0.10.pc'
'/opt/gstreamer_beagle/lib/pkgconfig/gstreamer-dataprotocol-0.10.pc'
/usr/bin/install -c -m 644 'gstreamer-net-0.10.pc'
'/opt/gstreamer_beagle/lib/pkgconfig/gstreamer-net-0.10.pc'
Making install in gst
/bin/sh: glib-genmarshal: command not found
make[1]: *** [gstmarshal.h] Error 127
make: *** [install-recursive] Error 1
Please help me in it.
Thanks In Advance,
Tejas.
----- Original Message -----
From: "Tejas Bhanabhagavanwala" <tejas at oriolesoftware.com>
To: "Felipe Contreras" <felipe.contreras at gmail.com>
Cc: "Nigel Hsiung" <nigelcz at hotmail.com>; "gst mailing list"
<gstreamer-embedded at lists.sourceforge.net>
Sent: Monday, October 26, 2009 11:47 AM
Subject: Re: New to gstreamer
> Hi Felipe,
> I am able to install glib-2.16.6 successfully at my $prefix
> path. I am following followed link to build and install gstreamer for
> embedded target.
> http://gstreamer.freedesktop.org/wiki/HowToCompileForEmbedded.
>
> For gstreamer i am giving following command .
>
> [root at Fedora gstreamer]# sb2
> ./configure --prefix=/opt/gstreamer_beagle/ --disable-nls --disable-static
> --enable-binary-registry
> --disable-loadsave --with-html-dir=/tmp/dump
>
> But i am getting following error while configuring
> gstreamer-0.10.25. config.log is as followed.
>
> [root at Fedora gstreamer-0.10.25]# sb2
> ./configure --prefix=/opt/gstreamer_beagle/ --disable-nls --disable-static
> --enable-binary-registry
> --disable-loadsave --with-html-dir=/tmp/dump
> configure: WARNING: unrecognized options: --enable-binary-registry
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking for a thread-safe mkdir -p... /bin/mkdir -p
> checking for gawk... gawk
> checking whether make sets $(MAKE)... yes
> checking nano version... 0 (release)
> checking whether to enable maintainer-specific portions of Makefiles... no
> checking build system type... arm-unknown-linux-gnueabi
> checking host system type... arm-unknown-linux-gnueabi
> checking for style of include used by make... GNU
> checking for gcc... gcc
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables...
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ISO C89... none needed
> checking dependency style of gcc... gcc3
> checking for a sed that does not truncate output... /bin/sed
> checking for grep that handles long lines and -e... /bin/grep
> checking for egrep... /bin/grep -E
> checking for fgrep... /bin/grep -F
> checking for ld used by gcc...
> /opt/arm-2008q3/arm-none-linux-gnueabi/bin/ld
> checking if the linker (/opt/arm-2008q3/arm-none-linux-gnueabi/bin/ld) is
> GNU ld... yes
> checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
> checking the name lister (/usr/bin/nm -B) interface... BSD nm
> checking whether ln -s works... yes
> checking the maximum length of command line arguments... 1966080
> checking whether the shell understands some XSI constructs... yes
> checking whether the shell understands "+="... yes
> checking for /opt/arm-2008q3/arm-none-linux-gnueabi/bin/ld option to
> reload
> object files... -r
> checking for objdump... objdump
> checking how to recognize dependent libraries... pass_all
> checking for ar... ar
> checking for strip... strip
> checking for ranlib... ranlib
> checking command to parse /usr/bin/nm -B output from gcc object... ok
> checking how to run the C preprocessor... gcc -E
> checking for ANSI C header files... yes
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking for dlfcn.h... yes
> checking for objdir... .libs
> checking if gcc supports -fno-rtti -fno-exceptions... no
> checking for gcc option to produce PIC... -fPIC -DPIC
> checking if gcc PIC flag -fPIC -DPIC works... yes
> checking if gcc static flag -static works... yes
> checking if gcc supports -c -o file.o... yes
> checking if gcc supports -c -o file.o... (cached) yes
> checking whether the gcc linker
> (/opt/arm-2008q3/arm-none-linux-gnueabi/bin/ld) supports shared
> libraries...
> yes
> checking whether -lc should be explicitly linked in... no
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking how to hardcode library paths into programs... immediate
> checking for shl_load... no
> checking for shl_load in -ldld... no
> checking for dlopen... no
> checking for dlopen in -ldl... yes
> checking whether a program can dlopen itself... yes
> checking whether a statically linked program can dlopen itself... no
> checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> checking whether NLS is requested... no
> checking for msgfmt... /usr/bin/msgfmt
> checking for gmsgfmt... /usr/bin/msgfmt
> checking for xgettext... /usr/bin/xgettext
> checking for msgmerge... /usr/bin/msgmerge
> checking for ld used by GCC...
> /opt/arm-2008q3/arm-none-linux-gnueabi/bin/ld
> checking if the linker (/opt/arm-2008q3/arm-none-linux-gnueabi/bin/ld) is
> GNU ld... yes
> checking for shared library run path origin... done
> checking for CFPreferencesCopyAppValue... no
> checking for CFLocaleCopyCurrent... no
> checking whether to use NLS... no
> configure: disabled subsystem pipeline XML load/save
> checking for pkg-config... /usr/bin/pkg-config
> checking pkg-config is at least version 0.9.0... yes
> checking for VALGRIND... no
> no
> configure: Using GStreamer source release as package name
> configure: Using Unknown package origin as package origin
> configure: WARNING: Sissy ! By asking to not build the tests known to
> fail,
> you hereby waive your right to customer support. If you do not agree with
> this EULA, please press Ctrl-C before the next line is printed. By
> allowing
> the next line to be printed, you expressly acknowledge your acceptance of
> this EULA.
> checking whether byte ordering is bigendian... no
> checking if unaligned memory access works correctly... (blacklisted) no
> checking for special C compiler options needed for large files... no
> checking for _FILE_OFFSET_BITS value needed for large files... 64
> checking for gcc... (cached) gcc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether gcc accepts -g... (cached) yes
> checking for gcc option to accept ISO C89... (cached) none needed
> checking dependency style of gcc... (cached) gcc3
> checking whether gcc and cc understand -c and -o together... yes
> checking dependency style of gcc... gcc3
> checking for perl... /usr/bin/perl
> checking for bison... /usr/bin/bison
> checking bison version 2.4.1 >= 1.875... yes
> checking for flex... /usr/bin/flex
> checking flex version 2.5.35 >= 2.5.31... yes
> checking for valgrind... no
> checking for gobject-introspection... no
> checking whether to build gtk-doc documentation... no
> checking for gtkdoc-check... no
> configure: Looking for Python version >= 2.1
> checking for python... /usr/bin/python
> checking for python2.2... no
> checking for python2.1... no
> checking for python2.0... no
> checking for python2... /usr/bin/python2
> checking for python1.6... no
> checking for python1.5... no
> configure: WARNING: No suitable version of python found
> checking whether to build plugin documentation... no (gtk-doc disabled or
> not available)
> checking for cos in -lm... yes
> checking for ANSI C header files... (cached) yes
> checking ucontext.h usability... yes
> checking ucontext.h presence... yes
> checking for ucontext.h... yes
> checking sys/socket.h usability... yes
> checking sys/socket.h presence... yes
> checking for sys/socket.h... yes
> checking sys/times.h usability... yes
> checking sys/times.h presence... yes
> checking for sys/times.h... yes
> checking for unistd.h... (cached) yes
> checking process.h usability... no
> checking process.h presence... no
> checking for process.h... no
> checking sys/utsname.h usability... yes
> checking sys/utsname.h presence... yes
> checking for sys/utsname.h... yes
> checking stdio_ext.h usability... yes
> checking stdio_ext.h presence... yes
> checking for stdio_ext.h... yes
> checking pthread.h usability... yes
> checking pthread.h presence... yes
> checking for pthread.h... yes
> checking valgrind/valgrind.h usability... no
> checking valgrind/valgrind.h presence... no
> checking for valgrind/valgrind.h... no
> checking winsock2.h usability... no
> checking winsock2.h presence... no
> checking for winsock2.h... no
> checking for __gmpz_init_set_d in -lgmp... no
> checking for gsl_rng_uniform_int in -lgsl... no
> checking for __uint128_t... no
> checking to see if compiler understands -fno-common... yes
> checking for sigaction... yes
> checking for fork... yes
> checking for _LARGEFILE_SOURCE value needed for large files... no
> checking for ftello... yes
> checking for fgetpos... yes
> checking for fsetpos... yes
> checking for poll... yes
> checking for ppoll... yes
> checking for pselect... yes
> checking for stdlib.h... (cached) yes
> checking for unistd.h... (cached) yes
> checking for getpagesize... yes
> checking for working mmap... yes
> checking for clock_gettime... no
> checking for clock_gettime in -lrt... yes
> checking for posix timers... yes
> checking for monotonic clock... yes
> checking whether gcc implements __PRETTY_FUNCTION__... yes
> checking whether gcc implements __FUNCTION__... yes
> checking whether gcc implements __func__... yes
> checking for register_printf_specifier... no
> checking for register_printf_function... yes
> checking for dladdr in -ldl... yes
> checking for socket... yes
> checking for gethostbyname... yes
> checking for inet_aton... yes
> checking for GLIB... no
> no
> configure: No package 'glib-2.0' found
> No package 'gobject-2.0' found
> No package 'gthread-2.0' found
> No package 'gmodule-no-export-2.0' found
> configure: error: This package requires GLib >= 2.16 to compile.
>
> Please help me to resolve this issue.
>
>
> Thanks In Advance,
> Tejas.
>
> ----- Original Message -----
> From: "Felipe Contreras" <felipe.contreras at gmail.com>
> To: "Tejas Bhanabhagavanwala" <tejas at oriolesoftware.com>
> Cc: "Nigel Hsiung" <nigelcz at hotmail.com>; "gst mailing list"
> <gstreamer-embedded at lists.sourceforge.net>
> Sent: Thursday, October 15, 2009 1:06 AM
> Subject: Re: New to gstreamer
>
>
> On Wed, Oct 14, 2009 at 2:35 PM, Tejas Bhanabhagavanwala
> <tejas at oriolesoftware.com> wrote:
>> Hi Felipe,
>> I have tried with scratchbox 1. SB1 has been installed
>> successfully. But when i tried to configure glib2.16.2 with following
>> command.
>>
>> [sbox-armv7: ~] > ./configure --prefix="$prefix" --disable-static
>> --with-html-dir=/tmp/dump --host=arm-none-linux-gnueabi
>
> Why did you add the '--host' option? It's nowhere on any instructions.
>
> Read this carefully: scratchbox was created to forget about
> cross-compilation; you don't need to specify the host, target, or
> anything.
>
>> it gives following error.Please find log of configure command as
>> followed.
>
> Of course it's failing because it thinks it's cross-compiling, so it's
> not using scratchbox.
>
>> checking whether we are cross compiling... yes
>
> This question has nothing to do with GStreamer, you should ask it in
> the scratchbox mailing list.
>
> Cheers.
>
> --
> Felipe Contreras
>
