New to gstreamer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Hi Felipe,
           This is really nice to have good guidance from your side. I will 
explain you about my system side.

I have Fedora 11 installed on my system. GCC version is 4.4.1. To install 
sbox2 i am following commands as followed.


I have downloaded sbox2-2.0 and qemu-0.11.0.tar.gz.

Both are resident in the following directory

/tmp/sbox2/sbox2-2.0

from here i have given following commands
./autogen.sh
make install prefix=/opt/sb2/

But my make fail and i have applied following patch and get success for 
installing sbox2-2.0

--- include/config_hardcoded.h Thu Apr 02 02:06:14 2009
+++ include/config_hardcoded.h Thu Oct 15 19:06:34 2009
@@ -1,22 +1,21 @@
-
-/* Define to the type of arg 1 for `readlink'. */
-#define READLINK_TYPE_ARG1 const char *path
-
-/* Define to the type of arg 2 for `readlink'. */
-#define READLINK_TYPE_ARG2 char *buf
-
-/* Define to the type of arg 3 for `readlink'. */
-#define READLINK_TYPE_ARG3 size_t bufsiz
-
-/* Define to the type of arg 1 for `scandir'. */
-#define SCANDIR_TYPE_ARG1 const char *dir
-
-/* Define to the type of arg 2 for `scandir'. */
-#define SCANDIR_TYPE_ARG2 struct dirent ***namelist
-
-/* Define to the type of arg 3 for `scandir'. */
-#define SCANDIR_TYPE_ARG3 int(*filter)(const struct dirent *)
-
-/* Define to the type of arg 4 for `scandir'. */
-#define SCANDIR_TYPE_ARG4 int(*compar)(const void *,const void *)
-
+
+/* Define to the type of arg 1 for `readlink'. */
+#define READLINK_TYPE_ARG1 const char *path
+
+/* Define to the type of arg 2 for `readlink'. */
+#define READLINK_TYPE_ARG2 char *buf
+
+/* Define to the type of arg 3 for `readlink'. */
+#define READLINK_TYPE_ARG3 size_t bufsiz
+
+/* Define to the type of arg 1 for `scandir'. */
+#define SCANDIR_TYPE_ARG1 const char *dir
+
+/* Define to the type of arg 2 for `scandir'. */
+#define SCANDIR_TYPE_ARG2 struct dirent ***namelist
+
+/* Define to the type of arg 3 for `scandir'. */
+#define SCANDIR_TYPE_ARG3 int(*filter)(const struct dirent *)
+
+/* Define to the type of arg 4 for `scandir'. */
+#define SCANDIR_TYPE_ARG4 int(*compar)( (__const struct dirent **, __const 
struct dirent **) )
--- preload/generate.py Thu Apr 02 02:06:14 2009
+++ preload/generate.py Thu Oct 15 19:03:24 2009
@@ -164,8 +164,8 @@
 W('int rename(const char *oldpath, const char *newpath)', b_map("oldpath"), 
b_map("newpath"))
 W('int revoke(const char *file)', b_map("file"))
 W('int rmdir(const char *pathname)', b_map("pathname"))
-W('int scandir(const char *dir, struct dirent ***namelist, 
SCANDIR_TYPE_ARG3, int(*compar)(const void *, const void *))', b_map("dir"), 
argnames=['dir','namelist','filter','compar'])
-W('int scandir64(const char *dir, struct dirent64 ***namelist, 
int(*filter)(const struct dirent64 *), int(*compar)(const void *, const void 
*))', b_map("dir"),argnames=['dir','namelist','filter','compar'])
+W('int scandir(const char *dir, struct dirent ***namelist,SCANDIR_TYPE_ARG3 
, SCANDIR_TYPE_ARG4)', b_map("dir"), 
argnames=['dir','namelist','filter','compar'])
+W('int scandir64(const char *dir, struct dirent64 ***namelist, 
SCANDIR_TYPE_ARG3,SCANDIR_TYPE_ARG4)', 
b_map("dir"),argnames=['dir','namelist','filter','compar'])
 W('int setxattr(const char *path, const char *name, const void *value, 
size_t size, int flags)', b_map("path"))
 W('int stat(const char *file_name, struct stat *buf)', b_map("file_name"))
 W('int stat64(const char *file_name, struct stat64 *buf)', 
b_map("file_name"))
--- preload/interface.master Thu Apr 02 02:06:14 2009
+++ preload/interface.master Thu Oct 15 19:26:21 2009
@@ -407,8 +407,8 @@
 #ifdef HAVE_SCANDIR
 #ifdef HAVE_LINUX_SCANDIR
 WRAP: int scandir(const char *dir, struct dirent ***namelist, \
- SCANDIR_TYPE_ARG3, int(*compar)(const void *, const void *)) : \
- map(dir) hardcode_param(3,filter)
+ int(*filter)(const struct dirent *), int(*compar)(const struct dirent **, 
const struct dirent **)) : \
+ map(dir)
 #endif
 #ifdef HAVE_OSX_SCANDIR
 WRAP: int scandir(const char *dirname, struct dirent ***namelist, int 
(*select)(struct dirent *), int (*compar)(const void *, const void *)): 
map(dirname)
@@ -417,7 +417,7 @@
 #ifdef HAVE_SCANDIR64
 WRAP: int scandir64(const char *dir, struct dirent64 ***namelist, \
  int(*filter)(const struct dirent64 *), \
- int(*compar)(const void *, const void *)) : \
+ int(*compar)(const struct dirent64 **, const struct dirent64 **)) : \
  map(dir)
 #endif
 #ifdef HAVE_SETXATTR

After that i have installed qemu by giving following commands.

./configure --prefix=/opt/qemu/ --target-list=arm-linux-user
make install

i have added sb3 bin path to my PATH variable.

My cross tool chain is installed at following path which is from 
Codesourcery( Sourcery G++ Lite version) and
is installed at /opt/arm-2008q3/.

These are my system set up.

Now when i give following command to set up qemu for my cross tool chain it 
gives following error.

[root at Fedora libc]# sb2-init -c /opt/qemu/bin/qemu-arm armv7 
/opt/arm-2008q3/bin/arm-none-linux-gnueabi-gcc
Info: Mapping mode not specified, using default (simple)
Using /opt/arm-2008q3/bin/arm-none-linux-gnueabi-gcc to detect target 
architecture:
Finished writing sb2.gcc.config
gcc configured.
sb2-init: Target architecture is 'arm'
sb2-init: Host architecture is 'i[3456]86'
Finished writing sb2.config
sb2-init: configuring libtool for this target:
/opt/qemu/bin/qemu-arm: error while loading shared libraries: cannot restore 
segment prot after reloc: Permission denied
/opt/qemu/bin/qemu-arm: error while loading shared libraries: cannot restore 
segment prot after reloc: Permission denied
/opt/qemu/bin/qemu-arm: error while loading shared libraries: cannot restore 
segment prot after reloc: Permission denied
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... configure: error: cannot run C 
compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details.


Running /opt/sb2/bin/sb2-build-libtool failed
You can run this manually later, otherwise your
sb2 environment is correctly setup and ready to use

After this when i configure glib by appluing following command, i can not 
configure it and it gives following error.

[root at Fedora libc]# cd /tmp/gstreamer/glib-2.16.6
[root at Fedora glib-2.16.6]# sb2 
./configure --prefix=/opt/gstreamer_beagle/ --disable-static --with-html-dir=/tmp/dump
/opt/qemu/bin/qemu-arm: error while loading shared libraries: cannot restore 
segment prot after reloc: Permission denied
/opt/qemu/bin/qemu-arm: error while loading shared libraries: cannot restore 
segment prot after reloc: Permission denied
/opt/qemu/bin/qemu-arm: error while loading shared libraries: cannot restore 
segment prot after reloc: Permission denied
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking build system type... arm-unknown-linux-gnueabi
checking host system type... arm-unknown-linux-gnueabi
checking for the BeOS... no
checking for Win32... no
checking for Mac OS X Carbon support... checking for style of include used 
by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... configure: error: cannot run C 
compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details.


        Please guide me in this situation.

Thanks in Advance,
Tejas.

----- Original Message ----- 
From: "Felipe Contreras" <felipe.contreras at gmail.com>
To: "Tejas Bhanabhagavanwala" <tejas at oriolesoftware.com>
Cc: "Nigel Hsiung" <nigelcz at hotmail.com>; "gst mailing list" 
<gstreamer-embedded at lists.sourceforge.net>
Sent: Thursday, October 15, 2009 1:06 AM
Subject: Re: New to gstreamer


On Wed, Oct 14, 2009 at 2:35 PM, Tejas Bhanabhagavanwala
<tejas at oriolesoftware.com> wrote:
> Hi Felipe,
> I have tried with scratchbox 1. SB1 has been installed
> successfully. But when i tried to configure glib2.16.2 with following
> command.
>
> [sbox-armv7: ~] > ./configure --prefix="$prefix" --disable-static
> --with-html-dir=/tmp/dump --host=arm-none-linux-gnueabi

Why did you add the '--host' option? It's nowhere on any instructions.

Read this carefully: scratchbox was created to forget about
cross-compilation; you don't need to specify the host, target, or
anything.

> it gives following error.Please find log of configure command as
> followed.

Of course it's failing because it thinks it's cross-compiling, so it's
not using scratchbox.

> checking whether we are cross compiling... yes

This question has nothing to do with GStreamer, you should ask it in
the scratchbox mailing list.

Cheers.

-- 
Felipe Contreras






[Index of Archives]     [Linux Embedded]     [Linux ARM Kernel]     [Linux for ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux Media]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux