On 17:39-20231003, Ayush Singh wrote: > > > driver. > > > > > > Signed-off-by: Ayush Singh <ayushdevel1325@xxxxxxxxx> > > > --- > > > .../devicetree/bindings/net/ti,cc1352p7.yaml | 48 +++++++++++++++++++ > > > MAINTAINERS | 6 +++ > > > 2 files changed, 54 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/net/ti,cc1352p7.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml > > > new file mode 100644 > > > index 000000000000..57bc2c43e5b1 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml > > > @@ -0,0 +1,48 @@ > > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/net/ti,cc1352p7.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Texas Instruments Simplelink CC1352P7 wireless MCU > > > + > > > +description: > > > + The cc1352p7 mcu can be connected via SPI or UART. > > If over SPI, then the binding is incomplete. This is fine for now, I guess. > > > > Best regards, > > Krzysztof > > Well, I added the line about SPI because the data sheet states that CC1352P7 > can be connected over SPI or UART when used as wireless MCU. But yes, I do > not have much knowledge about SPI itself, so the bindings might be > incomplete for SPI usage. Should I remove it or leave it be? I'd suggest to leave it for now, we can expand as there is a need. -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D _______________________________________________ greybus-dev mailing list -- greybus-dev@xxxxxxxxxxxxxxxx To unsubscribe send an email to greybus-dev-leave@xxxxxxxxxxxxxxxx