On 02/10/2023 20:24, Ayush Singh wrote: > Add DT bindings for BeaglePlay CC1352 co-processor. > Thank you for your patch. There is something to discuss/improve. Please use subject prefixes matching the subsystem. You can get them for example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory your patch is touching. For example: dt-bindings: net: > The BeaglePlay has a CC1352 co-processor. This co-processor is connected > to the main AM62 (running Linux) over UART. In the BeagleConnect > Technology, CC1352 is responsible for handling 6LoWPAN communication > with beagleconnect freedom nodes as well as their discovery > > This commit adds net/ti,cc1352p7. It is used by gb-beagleplay greybus A nit: I pointed you to the documentation explaining not to use "This commit adds". It's v6 and the wording is back. Instead drop both sentences - they are pointless in this context. First one repeats previous text, second describes driver, but we do not talk here about drivers. > driver. > > Signed-off-by: Ayush Singh <ayushdevel1325@xxxxxxxxx> > --- > .../devicetree/bindings/net/ti,cc1352p7.yaml | 48 +++++++++++++++++++ > MAINTAINERS | 6 +++ > 2 files changed, 54 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/ti,cc1352p7.yaml > > diff --git a/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml > new file mode 100644 > index 000000000000..57bc2c43e5b1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml > @@ -0,0 +1,48 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/ti,cc1352p7.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Texas Instruments Simplelink CC1352P7 wireless MCU > + > +description: > + The cc1352p7 mcu can be connected via SPI or UART. If over SPI, then the binding is incomplete. This is fine for now, I guess. > + > +maintainers: > + - Ayush Singh <ayushdevel1325@xxxxxxxxx> > + > +properties: > + compatible: > + const: ti,cc1352p7 > + > + clocks: > + maxItems: 2 Instead please list the items like: clocks: items: - description: High-Foo-bar - description: Low-Foo-bar > + > + reset-gpios: > + maxItems: 1 > + > + power-gpios: > + maxItems: 3 > + description: > + The device has three power rails that are exposed on external pins VDDS, > + VDDR and DCOUPL. No, power rails are not GPIOs. You need supplies, so: vdds-supply: true vddr-supply: true dcoupl-supply: true Look also at: Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml which explicitly allows only one powerdown GPIO. > + Best regards, Krzysztof _______________________________________________ greybus-dev mailing list -- greybus-dev@xxxxxxxxxxxxxxxx To unsubscribe send an email to greybus-dev-leave@xxxxxxxxxxxxxxxx