You are referring to the removal of last 2 newlines, right? In that case, I will fix it.+ + To compile this code as a module, chose M here: the module + will be called gb-beagleplay.ko + config GREYBUS_ES2 tristate "Greybus ES3 USB host controller" depends on USB diff --git a/drivers/greybus/Makefile b/drivers/greybus/Makefile index 9bccdd229aa2..15a84a83788d 100644 --- a/drivers/greybus/Makefile +++ b/drivers/greybus/Makefile @@ -18,9 +18,9 @@ obj-$(CONFIG_GREYBUS) += greybus.o # needed for trace events ccflags-y += -I$(src)+obj-$(CONFIG_GREYBUS_BEAGLEPLAY) += gb-beagleplay.o+ # Greybus Host controller drivers gb-es2-y := es2.oobj-$(CONFIG_GREYBUS_ES2) += gb-es2.o- -Does not look related to your patch.
diff --git a/drivers/greybus/gb-beagleplay.c b/drivers/greybus/gb-beagleplay.c new file mode 100644 index 000000000000..39d87ef3b8fc --- /dev/null +++ b/drivers/greybus/gb-beagleplay.c @@ -0,0 +1,526 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Beagleplay Linux Driver for Greybus + * + * Copyright (c) 2023 Ayush Singh <ayushdevel1325@xxxxxxxxx> + * Copyright (c) 2023 BeagleBoard.org Foundation + */ + +#include <linux/gfp.h> +#include <linux/greybus.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/printk.h> +#include <linux/serdev.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/greybus/hd.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/crc-ccitt.h> +#include <linux/circ_buf.h> +#include <linux/types.h> +#include <linux/workqueue.h> + +#define RX_HDLC_PAYLOAD 1024 +#define CRC_LEN 2 +#define MAX_RX_HDLC (1 + RX_HDLC_PAYLOAD + CRC_LEN) +#define TX_CIRC_BUF_SIZE 1024 + +#define ADDRESS_GREYBUS 0x01 +#define ADDRESS_DBG 0x02 +#define ADDRESS_CONTROL 0x03 + +#define HDLC_FRAME 0x7E +#define HDLC_ESC 0x7D +#define HDLC_XOR 0x20 + +#define CONTROL_SVC_START 0x01 +#define CONTROL_SVC_STOP 0x02 + +/* The maximum number of CPorts supported by Greybus Host Device */ +#define BEAGLEPLAY_GB_MAX_CPORTS 32 + +/*Use kerneldoc.
Thanks, will do that.
I was getting some errors in checkpatch without those. I guess they will go away if I am using kerneldoc?+ */ +struct gb_beagleplay { + struct serdev_device *serdev; + + struct gb_host_device *gb_host_device; + + struct work_struct tx_work; + /* tx_producer_lock: HDLC producer lock */Do not comment in two places - kerneldoc and in-line. Only one place.
So I do not actually get any errors here in checkpatch. I am running the follwing:+ spinlock_t tx_producer_lock; + /* tx_consumer_lock: HDLC consumer lock */ + spinlock_t tx_consumer_lock; + struct circ_buf tx_circ_buf; + u16 tx_crc; + u8 tx_ack_seq; + + u16 rx_buffer_len; + u8 rx_in_esc; + u8 rx_buffer[MAX_RX_HDLC]; +}; + +struct hdlc_payload { + u16 length; + void *payload; +}; +...+ +static int gb_serdev_init(struct gb_beagleplay *bg) +{ + u32 speed = 115200; + int ret; + + serdev_device_set_drvdata(bg->serdev, bg); + serdev_device_set_client_ops(bg->serdev, &gb_beagleplay_ops); + ret = serdev_device_open(bg->serdev); + if (ret) { + return dev_err_probe(&bg->serdev->dev, ret, + "Unable to Open Serial Device"); + }Please run scripts/checkpatch.pl --strict and fix reported warnings. Some warnings can be ignored, but the code here looks like it needs a fix. Feel free to get in touch if the warning is not clear.
`scripts/checkpatch.pl --codespell --strict patch/*`I only get a warning in coverletter due to that path of DT bindings being more than 75 character long and ` Lines should not end with a '('`.
+ if (!bg) + return -ENOMEM; + + bg->serdev = serdev; + ret = gb_serdev_init(bg); + if (ret) + return ret; + + ret = hdlc_init(bg); + if (ret) + goto free_serdev; + + ret = gb_greybus_init(bg); + if (ret) + goto free_hdlc; + + gb_beagleplay_start_svc(bg); + + return 0; + +free_hdlc: + hdlc_deinit(bg); +free_serdev: + gb_serdev_deinit(bg); + return ret; +} + +static void gb_beagleplay_remove(struct serdev_device *serdev) +{ + struct gb_beagleplay *bg = serdev_device_get_drvdata(serdev); + + gb_greybus_deinit(bg); + gb_beagleplay_stop_svc(bg); + hdlc_deinit(bg); + gb_serdev_deinit(bg); +} + +static const struct of_device_id gb_beagleplay_of_match[] = { + { + .compatible = "beagle,play-cc1352", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, gb_beagleplay_of_match); + +static struct serdev_device_driver gb_beagleplay_driver = { + .probe = gb_beagleplay_probe, + .remove = gb_beagleplay_remove, + .driver = { + .name = "gb_beagleplay", + .of_match_table = gb_beagleplay_of_match,This is still wrongly aligned. Spaces after tab. Are you sure checkpatch does not complain bout it?
Again, it doesn't seem to for me. Am I missing some environment variables or options? Or maybe something wrong with my editor config (neovim)?
Yours Sincerely Ayush Singh _______________________________________________ greybus-dev mailing list -- greybus-dev@xxxxxxxxxxxxxxxx To unsubscribe send an email to greybus-dev-leave@xxxxxxxxxxxxxxxx