Hello. Please forgive my delay in approving the message, I've been offline for several days. > When I use ps2, fups2, imps2, fuimps2, autops2, ms3 for 'XX' gpm won't > run at all. (It doesn't show up on the 'ps -A' list of running processes). I expect ps2 or imps2 to work. > /dev/mouse was a symlink to /dev/psaux before gpm was installed and is > now a symlink to /dev/gpmdata as a result of the gpm installation. This is not good. Try to run it with -m /dev/psaux, unless you are using the input engine. If so /dev/input/mice is your device name, but I don't remember what the protocol name is. > As an > aside, when X is configured to use a PS/2 mouse at /dev/psaux, I do have > mouse response in X (this is with gpm not running). What protocol, there? I'm sorry I can't really help, but I'm not a gpm user any more, although I'm the original author (I now use X on the few computers with a monitor, as more text terminals fit in the screen, and I just don't use local interaction with all the others, where I have serial consoles and a network interface). /alessandro -- Alessandro Rubini, free software specialist. Device drivers, embedded systems, courses. http://gnudd.com/ http://ar.linux.it/ _______________________________________________ gpm mailing list gpm@xxxxxxxxxxxxxx http://lists.linux.it/listinfo/gpm