Hi Sergey, GnuGk can't ignore a call. The H.323 protocol requires that it either accepts and routes a call or rejects it. You can use one of the many authentication policies to define which calls should be rejected. The other aspect is that once an H.323 endpoint is registered with a gatekeeper, the endpoint _must_ place all its calls through the gatekeeper. This ensures that you have a central security mechanism which calls are allowed and which are not. If your main gatekeeper is not within the local network and thus can't reach private IPs, you can either use NAT traversal and proxy all traffic in and out of the local network (simple, but inefficient) or place an additional gatekeeper within the local network, which eg. uses direct mode or routed mode and only routes calls to the outside gatekeeper that must leave the local network. The later is the better solution, but obviously requires installing multiple gatekeepers. Regards, Jan Sergey Zhmylove wrote: > Hello everyone! > > And the other question. > Is there any way to ignore a call? > For example: > client dials 1.2.3.4 and this call should be proxied as usually; > client dials 172.16.0.14 and this call should be ignored so client's > device would connect to 172.16.0.14 directly even if GnuGk doesn't have > an IP route to it. > > Any ideas? > > Best regards, > Sergey Zhmylove. -- Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/ ------------------------------------------------------------------------------ Transform Data into Opportunity. Accelerate data analysis in your applications with Intel Data Analytics Acceleration Library. Click to learn more. http://pubads.g.doubleclick.net/gampad/clk?id=278785231&iu=/4140 _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
