Hi Bo Xu,
Maybe i'm wrong, but to my opinion, you do not need to start two separated GnuGK, but simply one "multihomed" instance.[Gatekeeper::Main]
Fortytwo=42
Name=GnuGk
Home=1.2.3.4,192.168.0.254,10.1.3.4
Bind=1.2.3.4
[...]
[Proxy]
Enable=1
InternalNetwork=192.168.0.0/24
[ModeSelection]
192.160.0.0/24=PROXY,ROUTED
Best Regards,
Sebastien
Sebastien
2015-02-10 18:38 GMT+01:00 Bo Xu <boxuscience@xxxxxxxxx>:
Hi,I installed two NICs in one linux-PC and started two GnuGKs on each of NICs. each NIC belongs to different IP-segment and is connected to different switch, and there is firewall between these two IP-segment so they cannot ping each other, and they cannot do H.323-call to each other.I want to use the above two GnuGKs to route full-proxied call from one IP-segment to another, for example:EP-1 is in IPSegment-1, and registers to GnuGK-1EP-2 is in IPSegment-2, and registers to GnuGK-2when EP-1 calls EP-2, I want to make both signal/media stream from EP-1 go to GnuGK-1 first, then go to GnuGK-2, then go to EP-2could you tell me how to set the configuration.ini of GnuGK-1 and GnuGK-2 to do this? Thanks!Regards,Bo Xu
------------------------------------------------------------------------------
Dive into the World of Parallel Programming. The Go Parallel Website,
sponsored by Intel and developed in partnership with Slashdot Media, is your
hub for all things parallel software development, from weekly thought
leadership blogs to news, videos, case studies, tutorials and more. Take a
look and join the conversation now. http://goparallel.sourceforge.net/
_______________________________________________________
Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
------------------------------------------------------------------------------ Dive into the World of Parallel Programming. The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/
_______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
