Re: Dialing question

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Just delete it. No need to say the same thing twice.

Jan

Josh Rogalski wrote:
> Thank you Jan, should I remove the top line I have " h323_ID=ldap,dns,explicit,internal" or should I modify that one as well with the information you stated below?  
> 
> -----Original Message-----
> From: Jan Willamowius [mailto:jan@xxxxxxxxxxxxxx] 
> Sent: Wednesday, October 01, 2014 11:38 AM
> To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> Subject: Re:  Dialing question
> 
> Hi Josh,
> 
> I would suggest you use this:
> 
> [RoutingPolicy]
> default=explicit,ldap,internal,srv,dns,internal,parent,neighbor
> 
> With that configuration you'll be able to dial by alias or IP.
> 
> Regards,
> Jan
> 
> --
> Jan Willamowius, Founder of the GNU Gatekeeper Project EMail  : jan@xxxxxxxxxxxxxx
> Website: http://www.gnugk.org
> Support: http://www.willamowius.com/gnugk-support.html
> 
> 
> Josh Rogalski wrote:
> > Thank you Simon, I haven't tried this yet, but I will.  My current config looks like this:
> > 
> > [RoutingPolicy]
> > h323_ID=ldap,dns,internal
> > default=ldap,dns,internal
> > 
> > 
> > Would I then change it to:
> > 
> > [RoutingPolicy]
> > h323_ID=ldap,dns,explicit,internal
> > default=ldap,dns,explicit,internal
> > 
> > 
> > If I do this, will I be able to dial both alisas and IP Address depending on whichever I feel like dialing?  Do I understand this correctly?
> > From: Simon Horne [mailto:s.horne@xxxxxxxxxxxxxx]
> > Sent: Wednesday, October 01, 2014 4:39 AM
> > To: 'GNU Gatekeeper Users'
> > Subject: Re:  Dialing question
> > 
> > Josh
> > 
> > Use the explicit routing policy
> > http://www.gnugk.org/gnugk-manual-6.html
> > 
> > And add the following to the INI
> > [RoutingPolicy]
> > default=explicit,internal, ...
> > 
> > Simon
> > 
> > 
> > From: Josh Rogalski [mailto:rogalskij@xxxxxxxxxxxxx]
> > Sent: Wednesday, October 01, 2014 6:41 AM
> > To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx<mailto:openh323gk-users@xxxxxxxxxxxxxxxxxxxxx>
> > Subject:  Dialing question
> > 
> > I have a successfully running gnugk server acting as a gatekeeper for h323 video conference calls.  One of the quirks I find is that when I configure it on a video client endpoint, I can ONLY call to h323 alias's, and no longer can I call directly to IP addresses.  Is there a way to use the gatekeeper on a video endpoint, and use either the username OR the ip address for dialing?  I can provide my config if necessary.
> > 
> > [Josh Signature January 2012]

------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________________

Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/




[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux