Hi, direct mode cannot be enabled selectively and you should be aware that many gatekeeper features are not available in direct mode. Regards, Jan leogroot024@xxxxxxxxx wrote: > Hi Jan, > thanks voor the quick answer, but individual are both of situations working > even through the firewall. > But if I have it working voor an external connection, than i'm unable to > connect to an local system. to get this working i have to change GKRouted=1 > to GKRouted=0 but than is the external connection not working anymore. > > is there an way to configure this option like it is possible in > [modeselection] > > Regards, > > -----Oorspronkelijk bericht----- > From: Jan Willamowius > Sent: Thursday, March 21, 2013 6:18 PM > To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Subject: Re: connection with local and external > > Hi, > > to tunnel calls reliably through firewalls, you should be using a NAT > traversal protocol, like H.460.18 (and you will need 2 gatekeepers as > traversal servers to get through2 firewalls). GnuGk has it build in and > your endpoints probably do, too. > > The ExternalIP= switch is useful in configurations with port > forwarding, but those are very hard to configure correctly and usually > have some limitations. My advice would be to avoid port forwarding if > possible. > > BTW: Only having the 'explicit' routing policy enabled, will only > allow you to do IP dialing which takes away much of the fun of having a > gatekeeper. > > Regards, > Jan > > -- > Jan Willamowius, Founder of the GNU Gatekeeper Project > EMail : jan@xxxxxxxxxxxxxx > Website: http://www.gnugk.org > Support: http://www.willamowius.com/gnugk-support.html > > Relaxed Communications GmbH > Frahmredder 91 > 22393 Hamburg > Geschäftsführer: Jan Willamowius > HRB 125261 (Amtsgericht Hamburg) > USt-IdNr: DE286003584 > > > leogroot024@xxxxxxxxx wrote: > > Hi, > > I have trouble to connect to 2 systems with the same configuration. if got > > i only working with an little change > > > > situation 1, external > > 10.62.18.12 -> firewall -> gnugk -> firewall -> 212.46.129.165 > > connecting with 212.46.129.165 is working with the following > > configuration: > > > > [Gatekeeper::Main] > > ExternalIP=<removed for security> > > TraceLevel=2 > > > > [RoutedMode] > > GKRouted=1 > > AcceptUnregisteredCalls=1 > > CallSignalPort=1720 > > Q931PortRange=30000-30999 > > H245PortRange=31000-31999 > > > > [RoutingPolicy] > > default=explicit > > > > [Proxy] > > Enable=1 > > InternalNetwork=10.0.0.0/8 > > T120PortRange=50000-59999 > > RTPPortRange=50000-59999 > > > > [LogFile] > > Rotate=Daily > > RotateTime=00:00 > > > > situation 2, local > > 10.62.18.12 -> 10.62.18.9 > > connecting with 10.62.18.9 is only working with the following change: > > > > GKRouted=0 > > > > how can both situations working in 1 configuration? > > > > Best regards, -- Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/ ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_mar _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
