In your last mail you said Debian gave you version 2.3.0. The CatchAll
policy only exists in 2.3.1+.
Regards,
Jan
Maulik Shah wrote:
> Sorry to keep the questions coming - I did add catchall to the RoutingLRQ
> Config:
> [RoutingPolicy]
> default=explicit,internal,parent,neighbor
>
> [RoutingPolicy::OnLRQ]
> ;0048=internal
> default=internal,catchall
>
> [Routing::CatchAll]
> CatchAllIP=xx.xx.xx.54
>
>
> Logs:
> 2012/03/30 12:53:26.328 1 RasSrv.cxx(368) RAS LRQ
> Received from 10.35.59.170:1719
> 2012/03/30 12:53:26.328 2 Toolkit.cxx(560)
> RewriteToE164: 123@xxxxxxxx to 123
> 2012/03/30 12:53:26.328 3 gkauth.h(933) GKAUTH default LRQ
> check ok
> 2012/03/30 12:53:26.328 5 Routing.h(177) ROUTING Checking
> policy Internal for the request LRQ 28943
> 2012/03/30 12:53:26.328 2 RasSrv.cxx(408)
> LRJ|10.35.59.170|123@xxxxxxxx:h323_ID|10.35.59.170|requestDenied;
> 2012/03/30 12:53:26.328 3 RasSrv.cxx(250) RAS Send to
> 10.35.59.170:1719
> locationReject {
> requestSeqNum = 28943
> rejectReason = requestDenied <<null>>
> }
> 2012/03/30 12:53:26.328 5 RasSrv.cxx(264) RAS Sent
> Successful
>
> It does not seem to use teh catchall policy for routing it appears.
>
> Thanks
> Maulik
>
> On Fri, Mar 30, 2012 at 10:07 AM, Maulik Shah <maushah@xxxxxxxxx> wrote:
>
> > I prefer catch all - will give that a shot.
> >
> > I did try adding this as a permanent EP but in the LCF GnuGk sends back
> > the Call Signal Port as 0 or 1721, even though I added it as 1720
> >
> > 2012/03/30 09:58:55.647 1 RasTbl.cxx(282) New
> > EP|x.x.x.54:1720|e.bjn.vc:h323_ID|gateway|8358_endp
> > 2012/03/30 09:58:55.647 2 RasTbl.cxx(1944) Add permanent
> > endpoint x.x.x.54:1720
> >
> > Routing:
> > 2012/03/30 09:59:55.098 3 gkauth.h(933) GKAUTH default
> > LRQ check ok
> > 2012/03/30 09:59:55.098 5 Routing.h(177) ROUTING Checking
> > policy Internal for the request LRQ 28936
> > 2012/03/30 09:59:55.098 2 RasTbl.cxx(1336) RASTBL Gateway
> > 8358_endp matched as a default gateway
> > 2012/03/30 09:59:55.098 4 RasTbl.cxx(1724) RASTBL Prefix
> > match for gateways:
> > 199.48.152.54:1720
> > 2012/03/30 09:59:55.098 5 Routing.h(183) ROUTING Policy
> > Internal applied to the request LRQ 28936
> > 2012/03/30 09:59:55.098 2 RasSrv.cxx(408)
> > LCF|10.35.59.170|8358_endp|123@xxxxxxxx:h323_ID|10.35.59.170;
> > 2012/03/30 09:59:55.098 3 RasSrv.cxx(250) RAS Send to
> > 10.35.59.170:1719
> > locationConfirm {
> > requestSeqNum = 28936
> > callSignalAddress = ipAddress {
> > ip = 4 octets {
> > xx xx xx 36 .0.6
> > }
> > port = 1721
> > }
> > rasAddress = ipAddress {
> > ip = 4 octets {
> > xx xx xx 36 .0.6
> > }
> > port = 1719
> > }
> > }
> >
> > BTW the apt-get install uses GNUGK 2.3.0, not 2.3.6
> >
> > Any thoughts on this?
> >
> > Thanks
> > Maulik
> >
> > On Fri, Mar 30, 2012 at 8:28 AM, Jan Willamowius <jan@xxxxxxxxxxxxxx>wrote:
> >
> >> Hi,
> >>
> >> no, I meant when you use the 'catchall' policy, GnuGk will send a LCF
> >> for all LRQs, even if there is no endpoint that exactly matches the
> >> request. If thats what you want, use 'catchall'.
> >> If you only want to send LCFs for requests that match your endpoints,
> >> use the 'internal' policy.
> >>
> >> Regards,
> >> Jan
> >>
> >> Maulik wrote:
> >> > Hi Jan
> >> > Thx for the response - just to clarify you meant to send an LCF for s
> >> non registered endpt, not avoid an LCF - correct?
> >> >
> >> > Thx
> >> > Maulik
> >> >
> >> > Sent from my iPhone
> >> >
> >> > On Mar 30, 2012, at 12:42 AM, Jan Willamowius <jan@xxxxxxxxxxxxxx>
> >> wrote:
> >> >
> >> > > Hi Maulik,
> >> > >
> >> > > as you said, the latest release of GnuGk is 3.0.1. Version 3.1 is
> >> still
> >> > > in development and you can't get a packaged version, yet. You can get
> >> > > the source code from the CVS and compile it yourself, but please
> >> > > remember its not a release version, yet.
> >> > >
> >> > > The 'catchall' policy is available since GnuGk 2.3.1, but to avoid
> >> > > sending an LCF for a non existing endpoint, you might want to use the
> >> > > 'internal' policy instead. If your gateway doesn't register, configure
> >> > > it as a "permanent endpoint". See the manual for details.
> >> > >
> >> > > Regards,
> >> > > Jan
> >> > >
> >> > > --
> >> > > Jan Willamowius, Founder of the GNU Gatekeeper Project
> >> > > EMail : jan@xxxxxxxxxxxxxx
> >> > > Website: http://www.gnugk.org
> >> > > Support: http://www.willamowius.com/gnugk-support.html
> >> > >
> >> > >
> >> > > Maulik Shah wrote:
> >> > >> Hi All
> >> > >> Am a newbie to GnuGK and have looked through the aliases and a
> >> little
> >> > >> lost on a couple of items:
> >> > >>
> >> > >> 1. The Manuals on gnugk show they are for version 3.1 but the latest
> >> stable
> >> > >> version is 3.0.1 for Linux (Ubuntu apt-get is at 2.3.x) - how can I
> >> get a
> >> > >> Linux 64 bit tar for version 3.1?
> >> > >>
> >> > >> 2. Our basic use case for GnuGK is to act as a very simple dir GK:
> >> > >>
> >> > >> Receive LRQ from anonymous video GKs (such as Tandberg VCS) for our
> >> domain
> >> > >> (say user@xxxxxxxxx) and sent back an LCF with the host@GWIP port
> >> 1720. I
> >> > >> was going to use the CatchAll routing policy but when i add that to
> >> the
> >> > >> gatekeeper.ini config, I get an error saying the policy is unknown. I
> >> > >> cannot have our GW register as it does not support RAS, is there any
> >> way to
> >> > >> configure this on the GnuGK without CatchAll?
> >> > >>
> >> > >> Appreciate the help in advance
> >> > >>
> >> > >> Thanks
> >> > >> Maulik
> >> > >
> >> >
> >>
> >>
> >> --
> >> Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/
> >>
> >>
> >> ------------------------------------------------------------------------------
> >> This SF email is sponsosred by:
> >> Try Windows Azure free for 90 days Click Here
> >> http://p.sf.net/sfu/sfd2d-msazure
> >> _______________________________________________________
> >>
> >> Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> >> Archive:
> >> http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
> >> Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
> >> Homepage: http://www.gnugk.org/
> >>
> >
> >
--
Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/
------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________________
Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
