I did try adding this as a permanent EP but in the LCF GnuGk sends back the Call Signal Port as 0 or 1721, even though I added it as 1720
2012/03/30 09:58:55.647 1 RasTbl.cxx(282) New EP|x.x.x.54:1720|e.bjn.vc:h323_ID|gateway|8358_endp
2012/03/30 09:58:55.647 2 RasTbl.cxx(1944) Add permanent endpoint x.x.x.54:1720
Routing:
2012/03/30 09:59:55.098 3 gkauth.h(933) GKAUTH default LRQ check ok
2012/03/30 09:59:55.098 5 Routing.h(177) ROUTING Checking policy Internal for the request LRQ 28936
2012/03/30 09:59:55.098 2 RasTbl.cxx(1336) RASTBL Gateway 8358_endp matched as a default gateway
2012/03/30 09:59:55.098 4 RasTbl.cxx(1724) RASTBL Prefix match for gateways:
2012/03/30 09:59:55.098 5 Routing.h(183) ROUTING Policy Internal applied to the request LRQ 28936
2012/03/30 09:59:55.098 2 RasSrv.cxx(408) LCF|10.35.59.170|8358_endp|123@xxxxxxxx:h323_ID|10.35.59.170;
2012/03/30 09:59:55.098 3 RasSrv.cxx(250) RAS Send to 10.35.59.170:1719
locationConfirm {
requestSeqNum = 28936
callSignalAddress = ipAddress {
ip = 4 octets {
xx xx xx 36 .0.6
}
port = 1721
}
rasAddress = ipAddress {
ip = 4 octets {
xx xx xx 36 .0.6
}
port = 1719
}
}
BTW the apt-get install uses GNUGK 2.3.0, not 2.3.6
Any thoughts on this?
Thanks
Maulik
On Fri, Mar 30, 2012 at 8:28 AM, Jan Willamowius <jan@xxxxxxxxxxxxxx> wrote:
Hi,
no, I meant when you use the 'catchall' policy, GnuGk will send a LCF
for all LRQs, even if there is no endpoint that exactly matches the
request. If thats what you want, use 'catchall'.
If you only want to send LCFs for requests that match your endpoints,
use the 'internal' policy.
Regards,
Jan
--
Maulik wrote:
> Hi Jan
> Thx for the response - just to clarify you meant to send an LCF for s non registered endpt, not avoid an LCF - correct?
>
> Thx
> Maulik
>
> Sent from my iPhone
>
> On Mar 30, 2012, at 12:42 AM, Jan Willamowius <jan@xxxxxxxxxxxxxx> wrote:
>
> > Hi Maulik,
> >
> > as you said, the latest release of GnuGk is 3.0.1. Version 3.1 is still
> > in development and you can't get a packaged version, yet. You can get
> > the source code from the CVS and compile it yourself, but please
> > remember its not a release version, yet.
> >
> > The 'catchall' policy is available since GnuGk 2.3.1, but to avoid
> > sending an LCF for a non existing endpoint, you might want to use the
> > 'internal' policy instead. If your gateway doesn't register, configure
> > it as a "permanent endpoint". See the manual for details.
> >
> > Regards,
> > Jan
> >
> > --
> > Jan Willamowius, Founder of the GNU Gatekeeper Project
> > EMail : jan@xxxxxxxxxxxxxx
> > Website: http://www.gnugk.org
> > Support: http://www.willamowius.com/gnugk-support.html
> >
> >
> > Maulik Shah wrote:
> >> Hi All
> >> Am a newbie to GnuGK and have looked through the aliases and a little
> >> lost on a couple of items:
> >>
> >> 1. The Manuals on gnugk show they are for version 3.1 but the latest stable
> >> version is 3.0.1 for Linux (Ubuntu apt-get is at 2.3.x) - how can I get a
> >> Linux 64 bit tar for version 3.1?
> >>
> >> 2. Our basic use case for GnuGK is to act as a very simple dir GK:
> >>
> >> Receive LRQ from anonymous video GKs (such as Tandberg VCS) for our domain
> >> (say user@xxxxxxxxx) and sent back an LCF with the host@GWIP port 1720. I
> >> was going to use the CatchAll routing policy but when i add that to the
> >> gatekeeper.ini config, I get an error saying the policy is unknown. I
> >> cannot have our GW register as it does not support RAS, is there any way to
> >> configure this on the GnuGK without CatchAll?
> >>
> >> Appreciate the help in advance
> >>
> >> Thanks
> >> Maulik
> >
>
Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/
------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________________
Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
