Hi! The routing policies were the only obvious thing I noticed. the next step would be to enable tracing on level 5 and see why your calls are failing. See http://www.gnugk.org/gnugk-manual-14.html#ss14.2 Regards, Jan William Otstot wrote: > I have changed the routing policies to the below with no change. What am > I missing. > > [RoutingPolicy] > default=explicit,internal,srv,dns,neighbor > > [RoutingPolicy::OnLRQ] > default=explicit,internal,srv,dns,neighbor > > [RoutingPolicy::OnSetup] > default=explicit,internal,srv,dns,neighbor > > Thanks > Bill Otstot, Sr. Admin, Networking > Technology Services Division > Wake County Public Schools > 919-431-7074 > Email: botstot@xxxxxxxxx > > > > From: Jan Willamowius <jan@xxxxxxxxxxxxxx> > To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx, > Date: 03/05/2012 02:13 PM > Subject: Re: Tandberg Gatekeeper > > > > Hi, > > the way you configured your routing policies will not allow any > outbound calls. You are telling GnuGk it may only send calls to it's > neighbor so there is no way to place outbound calls. > > Regards, > Jan > > William Otstot wrote: > > I have been successful in getting the gnugk server an the Tandberg > > gatekeeper to see each other, but cannot make calls. I get the message > > "Your call cannot be completed because of security or permission > issues". > > Below is my config. What am I missing? Thanks > > > > [Gatekeeper::Main] > > FortyTwo=42 > > Name=BC1 > > TimeToLive=600 > > StatusTraceLevel=2 > > > > [GkStatus::Auth] > > rule=password > > XXXXX=****** > > > > [RoutedMode] > > ;GKRouted=1 > > AcceptNeighborsCalls=1 > > AcceptUnregisteredCalls=1 > > SupportNATedEndpoints=1 > > EnableH46018=1 > > EnableH46023=1 > > > > [RoutingPolicy] > > ;default=explicit,internal,srv,dns,neighbor > > default=neighbor > > > > [RoutingPolicy::OnLRQ] > > default=neighbor > > > > [RoutingPolicy::OnSetup] > > default=neighbor > > > > [RasSrv::Neighbors] > > VCSClient=GnuGk > > > > [Neighbor::VCSClient] > > GatekeeperIdentifier=GK1 > > Host=XXX.XXX.XXX.XXX > > SendPrefixes=* > > AcceptPrefixes=* > > H46018Client=0 > > H46018Server=1 > > AuthUser=XX > > Password=******* -- Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/ ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
