Jan Looking at the log. Try Turning off the Fast Start setting in Ekiga. That might work. Simon -----Original Message----- From: Jan Willamowius [mailto:jan@xxxxxxxxxxxxxx] Sent: 14 December 2011 09:52 To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Subject: Re: Why is the videophone endpoint not accepting this call? Simon, when you look at the trace, the messages are routed fine. Its just that the Sorenson rejects the call. Regards, Jan Simon Horne wrote: > Marvin > > Firstly don't use Ekiga it has known H.323 issues especially > registering to GnuGk . There are a number of other more compatible and > stable clients Jan mentioned earlier. I would recommend Mirial > www.mirial.com as a good start or another client that supports > RouteCallToGateway like Spranto. Make sure your client is registered > to the gatekeeper when you call the IP address and you have EXPLICIT in your [RoutingPolicy] section. > > Simon > > -----Original Message----- > From: MarvinHerbold [mailto:mherbold@xxxxxxxxxxxxxxxxx] > Sent: 14 December 2011 08:40 > To: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Subject: Why is the videophone endpoint not > accepting this call? > > > The two endpoints are Ekiga running on a PC, and a Sorenson VP-200 at > the other end. The Ekiga is placing a call to the gatekeeper, and I > am having the gatekeeper route the call to the Sorenson VP-200. > > The RouteRequest I am getting is: > RouteRequest|72.222.237.138:30002|unregistered|7120||Marvin:h323_ID|69 > RouteRequest|-0 > RouteRequest|0-ca-6a-d6-05-19-10-9e-90-00-24-e8-1c-86-17|74.208.147.64 > RouteRequest|0-ca-6a-d6-05-19-10-9e-90-00-24-e8-1c-86-17||e > RouteRequest|kiga3.2.7 > (OPAL v3.6.8); > > And I am responding with a: > RouteToGateway Test 68.3.231.14 unregistered 7120 > > Note that I am not sure if the RouteToGateway is correct to use here... > also, I am using 'Test' alias but really there are no registered > endpoints anywhere in the system... so I am not sure what I am > supposed to be using for the alias. > > >From the attached log it does seem like the call is going to the > >Sorenson > VP-200 but it is not getting accepted for some reason. The Ekiga > screen says "The call has been rejected." The Sorenson VP-200 never rings. > > I have uploaded the relevant part of the log file - I am not sure if I > have done it correctly... > > http://old.nabble.com/file/p32971312/gnugk.txt gnugk.txt > > Thanks for any insight! > > Marvin -- Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/ ---------------------------------------------------------------------------- -- Systems Optimization Self Assessment Improve efficiency and utilization of IT resources. Drive out cost and improve service delivery. Take 5 minutes to use this Systems Optimization Self Assessment. http://www.accelacomm.com/jaw/sdnl/114/51450054/ _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/ ------------------------------------------------------------------------------ Cloud Computing - Latest Buzzword or a Glimpse of the Future? This paper surveys cloud computing today: What are the benefits? Why are businesses embracing it? What are its payoffs and pitfalls? http://www.accelacomm.com/jaw/sdnl/114/51425149/ _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
