Re: Why is the videophone endpoint not accepting this call?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Simon,

when you look at the trace, the messages are routed fine. Its just that
the Sorenson rejects the call.

Regards,
Jan

Simon Horne wrote:
> Marvin
> 
> Firstly don't use Ekiga it has known H.323 issues especially registering to
> GnuGk . There are a number of other more compatible and stable clients Jan
> mentioned earlier. I would recommend Mirial www.mirial.com as a good start
> or another client that supports RouteCallToGateway like Spranto. Make sure
> your client is registered to the gatekeeper when you call the IP address and
> you have EXPLICIT in your [RoutingPolicy] section.
> 
> Simon 
> 
> -----Original Message-----
> From: MarvinHerbold [mailto:mherbold@xxxxxxxxxxxxxxxxx] 
> Sent: 14 December 2011 08:40
> To: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> Subject:  Why is the videophone endpoint not accepting
> this call?
> 
> 
> The two endpoints are Ekiga running on a PC, and a Sorenson VP-200 at the
> other end.  The Ekiga is placing a call to the gatekeeper, and I am having
> the gatekeeper route the call to the Sorenson VP-200.
> 
> The RouteRequest I am getting is:
> RouteRequest|72.222.237.138:30002|unregistered|7120||Marvin:h323_ID|69-0
> RouteRequest|0-ca-6a-d6-05-19-10-9e-90-00-24-e8-1c-86-17|74.208.147.64|e
> RouteRequest|kiga3.2.7
> (OPAL v3.6.8);
> 
> And I am responding with a:
> RouteToGateway Test 68.3.231.14 unregistered 7120
> 
> Note that I am not sure if the RouteToGateway is correct to use here...
> also, I am using 'Test' alias but really there are no registered endpoints
> anywhere in the system... so I am not sure what I am supposed to be using
> for the alias.
> 
> >From the attached log it does seem like the call is going to the 
> >Sorenson
> VP-200 but it is not getting accepted for some reason.  The Ekiga screen
> says "The call has been rejected."  The Sorenson VP-200 never rings.
> 
> I have uploaded the relevant part of the log file - I am not sure if I have
> done it correctly...
> 
> http://old.nabble.com/file/p32971312/gnugk.txt gnugk.txt 
> 
> Thanks for any insight!
> 
> Marvin

-- 
Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/

------------------------------------------------------------------------------
Systems Optimization Self Assessment
Improve efficiency and utilization of IT resources. Drive out cost and 
improve service delivery. Take 5 minutes to use this Systems Optimization 
Self Assessment. http://www.accelacomm.com/jaw/sdnl/114/51450054/
_______________________________________________________

Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/


[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux