Hi Des, that trace message simply tells you that GnuGk is already getting RTP packets and doesn't yet know where to send them. At the start of a call that can happen normally but should stop soon. If it doesn't, something went wrong with the call, but this message doesn't tell us what. I would suggest 2 things: Add to your config [Proxy] DisableRTPQueueing=1 and update to GnuGk 2.3.5. The later probably won't help, just to be sure you aren't running into a bug that was solved already. If calls still fail, you'll have to look through a level 5 trace of a call to see why GnuGk doesn't get a destination address for the RTP. Regards, Jan -- Jan Willamowius, Founder of the GNU Gatekeeper Project EMail : jan@xxxxxxxxxxxxxx Website: http://www.gnugk.org Support: http://www.willamowius.com/gnugk-support.html Des Gellert wrote: > Hello all, > > From time to time my GnuGK will start having issues and when I check the log I see thousands of entries like this; > 2011/11/01 12:35:07.652 3 ProxyChannel.cxx(5887) RTCP CodianMCUip:61923<=>GnuGKip:1069<=>EndpointIP:2473 socket has no destination address yet, flush ignored > > In today's connection, these messages started appearing within 2 seconds of the connection being initiated. There was one entry (as per above) and then; > 2011/11/01 11:58:03.665 3 ProxyChannel.cxx(7153) Proxy CodianMCUip:61923<=> GnuGKip:1069<=> EndpointIP:2473 forward blocked > Followed by thousands of entries. > > Disconnecting and then reconnecting, twice, did not resolve the issue. > > Sometimes the connection between the Endpoint and the MCU will hold up, but in the main, the connection will ultimately drop. > > The Codian MCU is a 4505 (firmware is up to date). > The endpoint is a Cisco/Tandberg C60 and the firmware is up to date. > I understand that the Gatekeeper version is 2.3.4 > > The Gatekeeper config is (edited version, to remove internal IPs); > > [Gatekeeper::Main] > TotalBandwith=-1 > Fourtytwo=42 > Name=gatekeeper... > Home=GatekeperIP > Bind=GatekeeperIP > EndpointIDSuffix=_details > TimeToLive=300 > DefaultDomain=default > CompareAliasCase=0 > > [RoutedMode] > GKRouted=1 > CallSignalPort=1720 > AcceptNeighborsCalls=1 > AcceptUnregisteredCalls=1 > DropCallsByReleaseComplete=1 > SendReleaseCompleteOnDRQ=1 > > [RoutingPolicy] > default=explicit,internal,enum,srv,dns,parent,neighbor > > [Proxy] > Enable=1 > InternalNetwork=IPrange > > [GKStatus::Auth] > regex=^IPrange > FileIPAuth=required;RRQ,LRQ,Setup > rule=regex > > [FileIPAuth] > any=allow > > AARNet-a-gk1=AARNet:1719;*; > > [Endpoint] > Type=Gateway > Gatekeeper=AARNet > Vendor=Cisco > H323ID=FlindersGK > Prefix=prefix > E164=E.164# > > RRQRetryInterval=10 > TimeToLive=900 > Discovery=0 > > UnregisterOnReload=1 > > [RasSrv::ARQFeatures] > CallUnregisteredEndpoints=1 > > [RasSrv::LRQFeatures] > IncludeDestinationInfoInLCF=1 > > [CallTable] > DefaultCallTimeout=0 > GenerateNBCDR=1 > GenerateUCCDR=1 > AcctUpdateInterval=0 > > [Gatekeeper::Acct] > FileAcct=required;start,update,stop,on,off > default=accept > > [FileAcct] > DetailFile=/var/log/acct.log > Rotate=0 > > END > > Any clues on what might be happening? > Where should I be directing my attention to resolve this issue? > > Des Gellert > Audio Visual / ICT Officer > Flinders NT Medical Program > 1st Floor Yellow Wing, Building 4, Royal Darwin Hospital Campus, Tiwi NT 0810 > PO Box 41326, Casuarina NT 0811 > p: (08) 8922 6918, f: (08) 8922 9728 and m: 0400 794 125 > > Before you print, please think. Do I really need a hard copy of this message? > ------------------------------------------------------------------------------ RSA® Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
