|
This script works for Suse OES 10.3. Place it in /etc/init.d/
=======================
# Provides: gnugk
# Required-Start: $syslog $remote_fs # Should-Start: $time ypbind sendmail # Required-Stop: $syslog $remote_fs # Should-Stop: $time ypbind sendmail # Default-Start: 3 5 # Default-Stop: 0 1 2 6 # Short-Description: Gnu Gatekeeper for video conferences # Description: Start FOO to allow XY and provide YZ # continued on second line by '#<TAB>' # should contain enough info for the runlevel editor # to give admin some idea what this service does and # what it's needed for ... # (The Short-Description should already be a good hint.) ### END INIT INFO # # Any extensions to the keywords given above should be preceeded by # X-VendorTag- (X-UnitedLinux- X-SuSE- for us) according to LSB. # # Notes on Required-Start/Should-Start: # * There are two different issues that are solved by Required-Start # and Should-Start # (a) Hard dependencies: This is used by the runlevel editor to determine # which services absolutely need to be started to make the start of # this service make sense. Example: nfsserver should have # Required-Start: $portmap # Also, required services are started before the dependent ones. # The runlevel editor will warn about such missing hard dependencies # and suggest enabling. During system startup, you may expect an error, # if the dependency is not fulfilled. # (b) Specifying the init script ordering, not real (hard) dependencies. # This is needed by insserv to determine which service should be # started first (and at a later stage what services can be started # in parallel). The tag Should-Start: is used for this. # It tells, that if a service is available, it should be started # before. If not, never mind. # * When specifying hard dependencies or ordering requirements, you can # use names of services (contents of their Provides: section) # or pseudo names starting with a $. The following ones are available # according to LSB (1.1): # $local_fs all local file systems are mounted # (most services should need this!) # $remote_fs all remote file systems are mounted # (note that /usr may be remote, so # many services should Require this!) # $syslog system logging facility up # $network low level networking (eth card, ...) # $named hostname resolution available # $netdaemons all network daemons are running # The $netdaemons pseudo service has been removed in LSB 1.2. # For now, we still offer it for backward compatibility. # These are new (LSB 1.2): # $time the system time has been set correctly # $portmap SunRPC portmapping service available # UnitedLinux extensions: # $ALL indicates that a script should be inserted # at the end # * The services specified in the stop tags # (Required-Stop/Should-Stop) # specify which services need to be still running when this service # is shut down. Often the entries there are just copies or a subset # from the respective start tag. # * Should-Start/Stop are now part of LSB as of 2.0, # formerly SUSE/Unitedlinux used X-UnitedLinux-Should-Start/-Stop. # insserv does support both variants. # * X-UnitedLinux-Default-Enabled: yes/no is used at installation time # (%fillup_and_insserv macro in %post of many RPMs) to specify whether # a startup script should default to be enabled after installation. # It's not used by insserv. # # Note on runlevels: # 0 - halt/poweroff 6 - reboot # 1 - single user 2 - multiuser without network exported # 3 - multiuser w/ network (text mode) 5 - multiuser w/ network and X11 (xdm) # # Note on script names: # http://www.linuxbase.org/spec/refspecs/LSB_1.3.0/gLSB/gLSB/scrptnames.html # A registry has been set up to manage the init script namespace. # http://www.lanana.org/ # Please use the names already registered or register one or use a # vendor prefix. # # Modified: 2011/07/28 G.J. Werler Witteveen+Bos - Created gnugk rc file # change these settings to fit your gnugk installation
GNUGK_BIN=/opt/gnugk/bin/gnugk GNUGK_INI=/opt/gnugk/etc/gatekeeper.ini GNUGK_LOG=/var/log/gnugk/gnugk.log # no changes needed below this point # Check for missing binaries (stale symlinks should not happen)
# Note: Special treatment of stop for LSB conformance test -x ${GNUGK_BIN} || { echo "${GNUGK_BIN} not installed"; if [ "$1" = "stop" ]; then exit 0; else exit 5; fi; } # Check for existence of needed config file and read it
test -r ${GNUGK_INI} || { echo "${GNUGK_INI} not existing"; if [ "$1" = "stop" ]; then exit 0; else exit 6; fi; } # Read config
#. ${GNUGK_INI} # Logfile
LOG_DIR=`dirname ${GNUGK_LOG}` if [ ! -d ${LOG_DIF} ] then echo "Creating logdir $LOG_DIR" mkdir -p ${LOG_DIR} fi # Source LSB init functions
# providing start_daemon, killproc, pidofproc, # log_success_msg, log_failure_msg and log_warning_msg. # This is currently not used by UnitedLinux based distributions and # not needed for init scripts for UnitedLinux only. If it is used, # the functions from rc.status should not be sourced or used. #. /lib/lsb/init-functions # Shell functions sourced from /etc/rc.status:
# rc_check check and set local and overall rc status # rc_status check and set local and overall rc status # rc_status -v be verbose in local rc status and clear it afterwards # rc_status -v -r ditto and clear both the local and overall rc status # rc_status -s display "skipped" and exit with status 3 # rc_status -u display "unused" and exit with status 3 # rc_failed set local and overall rc status to failed # rc_failed <num> set local and overall rc status to <num> # rc_reset clear both the local and overall rc status # rc_exit exit appropriate to overall rc status # rc_active checks whether a service is activated by symlinks . /etc/rc.status # Reset status of this service
rc_reset # Return values acc. to LSB for all commands but status:
# 0 - success # 1 - generic or unspecified error # 2 - invalid or excess argument(s) # 3 - unimplemented feature (e.g. "reload") # 4 - user had insufficient privileges # 5 - program is not installed # 6 - program is not configured # 7 - program is not running # 8--199 - reserved (8--99 LSB, 100--149 distrib, 150--199 appl) # # Note that starting an already running service, stopping # or restarting a not-running service as well as the restart # with force-reload (in case signaling is not supported) are # considered a success. case "$1" in
start) echo -n "Starting GNUGK " ## Start daemon with startproc(8). If this fails ## the return value is set appropriately by startproc. /sbin/startproc ${GNUGK_BIN} -c ${GNUGK_INI} -o ${GNUGK_LOG} &> /dev/null # Remember status and be verbose
rc_status -v ;; stop) echo -n "Shutting down GNUGK " ## Stop daemon with killproc(8) and if this fails ## killproc sets the return value according to LSB. /sbin/killproc -TERM ${GNUGK_BIN}
# Remember status and be verbose
rc_status -v ;; try-restart|condrestart) ## Do a restart only if the service was active before. ## Note: try-restart is now part of LSB (as of 1.9). ## RH has a similar command named condrestart. if test "$1" = "condrestart"; then echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}" fi $0 status if test $? = 0; then $0 restart else rc_reset # Not running is not a failure. fi # Remember status and be quiet rc_status ;; restart) ## Stop the service and regardless of whether it was ## running or not, start it again. $0 stop $0 start # Remember status and be quiet
rc_status ;; force-reload) ## Signal the daemon to reload its config. Most daemons ## do this on signal 1 (SIGHUP). ## If it does not support it, restart the service if it ## is running. echo -n "Reload service FOO "
## if it supports it: /sbin/killproc -HUP ${GNUGK_BIN} #touch /var/run/FOO.pid rc_status -v ## Otherwise:
#$0 try-restart #rc_status ;; reload) ## Like force-reload, but if daemon does not support ## signaling, do nothing (!) # If it supports signaling:
echo -n "Reload service GNUGK " /sbin/killproc -HUP ${GNUGK_BIN} #touch /var/run/FOO.pid rc_status -v ## Otherwise if it does not support reload:
#rc_failed 3 #rc_status -v ;; status) echo -n "Checking for service GNUGK " ## Check status with checkproc(8), if process is running ## checkproc will return with exit status 0. # Return value is slightly different for the status command:
# 0 - service up and running # 1 - service dead, but /var/run/ pid file exists # 2 - service dead, but /var/lock/ lock file exists # 3 - service not running (unused) # 4 - service status unknown :-( # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.) # NOTE: checkproc returns LSB compliant status values.
/sbin/checkproc ${GNUGK_BIN} # NOTE: rc_status knows that we called this init script with # "status" option and adapts its messages accordingly. rc_status -v ;; probe) ## Optional: Probe for the necessity of a reload, print out the ## argument to this init script which is required for a reload. ## Note: probe is not (yet) part of LSB (as of 1.9) test /etc/FOO/FOO.conf -nt /var/run/FOO.pid && echo reload
;; *) echo "Usage: $0 {start|stop|status|reload}" exit 1 ;; esac rc_exit >>> Op Donderdag 28 Juli 2011 om 8:50 is in bericht <20110728085057.72eca86a@xxxxxxxxxxx> door Jan Willamowius <jan@xxxxxxxxxxxxxx> geschreven:
------------------------------------------------------------------------------------------
DISCLAIMER: This e-mail is strictly confidential and is intended solely for the addressee. It is prohibited for unauthorized persons to utilize the information contained within this e-mail. If you receive this e-mail and you are not the addressee, then please delete it from your system and notify the person who sent it to you. Our company accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided, unless that information is subsequently confirmed in writing Witteveen+Bos refers to the network of participating member firms of Witteveen+Bos Raadgevende ingenieurs B.V., Deventer (chamber of commerce 38020751), each of which is a separate and independent legal entity. www.witteveenbos.nl or www.witteveenbos.com ------------------------------------------------------------------------------------------ Before printing, think about the environment ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ |
------------------------------------------------------------------------------ Got Input? Slashdot Needs You. Take our quick survey online. Come on, we don't ask for help often. Plus, you'll get a chance to win $100 to spend on ThinkGeek. http://p.sf.net/sfu/slashdot-survey
_______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
