Hi, Firstly, my apologies if any of my below questions are stupid. I am currently working with Tim on getting our Panasonic NCP 500 phone systems to talk to one another using the GNUGK software. I'm a little confused how to setup the config for the service, please find the configuration I am using at the main site: [Gatekeeper::Main] Fortytwo=42 Name=XXXX EndpointIDSuffix=_XXX TimeToLive=300 ExternalIP=(removed) [GkStatus::Auth] rule=allow [RoutedMode] GKRouted=1 H245Routed=0 CallSignalPort=1719 RemoveH245AddressOnTunneling=1 DropCallsByReleaseComplete=1 SupportNATedEndpoints=1 Q931PortRange=30000-39999 H245PortRange=40000-49999 [Proxy] Enable=1 ;InternalNetwork=192.168.0.0/24 RTPPortRange=10000-12255 [LogFile] Rotate=Daily RotateTime=23:00 Filename=C:\\gnugk-2.3.2-3-win32-x86-service\\Logs\\GnuGk.log Log from the Java web app at the main site (105 is the phone system): Gatekeeper(GNU) Version(2.3.2) Ext(pthreads=0,radius=1,mysql=0,pgsql=0,firebird=0,odbc=1,sqlite=0,large_fdset=0,crypto/ssl=1,h46018=1,h46023=1) Build(Jun 29 2010, 14:48:06) Sys(Server 2003 i586 (Model=23 Stepping=10) v5.2.3790) Startup: Wed, 28 Jul 2010 15:16:24 -0400 Running: 0 days 00:00:31 ; AllRegistrations RCF|192.168.0.105:1720|4312_endp:h323_ID|terminal|4312_endp Number of Endpoints: 1 ; CurrentCalls Number of Calls: 0 Active: 0 From Neighbor: 0 From Parent: 0 ; ARJ|192.168.0.105:1720|5201:dialedDigits|5101:dialedDigits|false|calledPartyNotRegistered|00-64-bd-4b-85-a5-c4-1f-10-9d-aa-9b-38-11-76-77; DCF|192.168.0.105|4312_endp|18633|normalDrop|00-64-bd-4b-85-a5-c4-1f-10-9d-aa-9b-38-11-76-77; Telnet log from the remote site (112 is the phone system): Version: Gatekeeper(GNU) Version(2.3.2) Ext(pthreads=0,radius=1,mysql=0,pgsql=0,firebird=0,odbc=1,sqlite=0,la rge_fdset=0,crypto/ssl=1,h46018=1,h46023=1) Build(Jun 29 2010, 14:48:06) Sys(7 i586 (Model=23 Steppi ng=10) v6.1.7600) Startup: Wed, 28 Jul 2010 15:16:16 -0400 Running: 0 days 00:00:37 ; UCF|192.168.0.112|7208_endp; RCF|192.168.0.112:1720|5101:dialedDigits|terminal|7208_endp; ARJ|192.168.0.112:1720|510115101:dialedDigits|5205:dialedDigits|false|calledPartyNotRegistered|00-04 -b3-de-fa-a7-c4-1f-1b-54-fd-f2-43-c0-f9-3f; DCF|192.168.0.112|7208_endp|2007|normalDrop|00-04-b3-de-fa-a7-c4-1f-1b-54-fd-f2-43-c0-f9-3f; UCF|192.168.0.112|7208_endp; RCF|192.168.0.112:1720|5101:dialedDigits|terminal|3337_gk2; I should be getting more end points registered, right? Should I be putting in end point entries like is shown in section 10 or 11 of the manual? Or should I be doing it as per section 7? My apologies for the confusing email, I'm not the sharpest tool in the shed and I think I am confusing myself...Thanks for any help, Stewart ________________________________________ From: Jan Willamowius [jan@xxxxxxxxxxxxxx] Sent: Tuesday, 27 July 2010 6:56 PM To: GNU Gatekeeper Users Cc: Tim Coates Subject: Re: Panasonic IP GW 16 v 2.011 GateKeeper Configuration? Hi Tim, if you put a GnuGk in proxy mode at both ends you should be able to connect your 2 PBXs. Your Panasonic phone systems would be 'permanent endpoints' end your GnuGk config and you will probably want to assign a certain prefix to each of them. Regards, Jan Tim Coates wrote: > Hi, > > We use a Panasonic NCP500 phone systems on an internal network behind a firewall - call this PABX-A. We would like to connect to an second Panasonic NCP500 phone system that is geographically separated network and also behind a firewall - call this PABX-B. The documentation provided with the phone system wants to use a VPN or similar. Ideally, management would prefer not to use a VPN and this is why we are looking at the gatekeeper software. > > NOTE: Each PABX has ip phones and has a IPGW card. > > The problem that we have is a that a person on PABX-A is able to call a person on PABX-B, BUT.... does not get any audio. What happens is that when a user on PABX-A using an ip phone calls a user on PABX-2 (who also has an ip phone), the phone system will transfer control of the call (at least audio etc.) over to the extensions directly. We think the gatekeeper software can be used and configured so that when the call is handed to the phones this software can transfer the audio as necessary. > > The phone has gateway property that "Identifies the IP address of the primary gateway (typically a router or similar device) that exchanges IP packets with the other gateways on the VoIP network." > > We think that we would be able to set this field to the ip address for the gatekeeper software. And that the gatekeeper software would be able to send the packets to other gatekeepers based on the rules in the configuration files. > > 1. Is this possible? > > 2. Can you provide any details on the setup the gatekeeper configuration files for use with Panasonic phone systems? And specifically Panasonic IP GW 16 v 2.011? > > Any assistance in this matter would be greatly appreciated. > > Regards, > -- Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/ ------------------------------------------------------------------------------ The Palm PDK Hot Apps Program offers developers who use the Plug-In Development Kit to bring their C/C++ apps to Palm for a share of $1 Million in cash or HP Products. Visit us here for more details: http://p.sf.net/sfu/dev2dev-palm _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
