Hey Simon, Jan, I've got the stuff working with the way Jan advised (no Bind or NetworkInterfaces). [Gatekeeper::Main] Fourtytwo=42 Name=OpenH323GK-68 Home=x.x.x.68 ExternalIP=x.x.x.68 Thanks! Regards, Vladyslav 2009/11/16 Simon Horne <s.horne@xxxxxxxxxxxxxx>: > > Vladyslav > > Home most definitely should be working. (with no bind or ExternalIP) I have > it working on a windows PC on my LAN. > > Looking at the code Home should be read. > > When you startup what does it say it is listening on. If you have 2 > addresses then the only thing I can think of is that it is not reading your > INI. > > Simon > > -----Original Message----- > From: Jan Willamowius [mailto:jan@xxxxxxxxxxxxxx] > Sent: Monday, 16 November 2009 2:54 AM > To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Subject: Re: multiple addresses on single interface > > Hi Vladyslav, > > the selection of IPs has changed considerably in the last few versions. > I would suggest as a test that you drop the NetworkInterfaces= and Bind= > setting and set ExternalIP= instead. > > Regards, > Jan > > Vladyslav Bakayev wrote: >> Hey Jan, Simon, fellow community, >> >> During last week I've decided that its about time to check updated >> version of the GnuGK, as I've been running 2.2.7 for a while. Compile >> was easy with latest CVS versions of ptlib, h323plus and openh323gk, >> however the fresh-made binary got a problem with my current config, >> which I seem to be unable to resolve (while 2.2.7 works fine). >> >> Symptoms of the problem is non-working RTP: neither of calling >> parties can hear each other. >> >> GnuGK runs on x.x.x.68 address (alias on Ethernet interface), while >> x.x.x.66 address is the primary interface address. GnuGK is configured >> in H323 Proxy mode, >> >> With Wireshark I've checked the packet flow, and found that GnuGK >> sends wrong H.225 callProceeding packet from x.x.x.68, It indicates >> x.x.x.66 address inside the mediaChannel and mediaControlChannel >> fields, while it should be x.x.x.68 as well. After it RTP streams are >> sending packets to x.x.x.66, where nothing is waiting for them. >> >> Related logging (startup of gnugk): >> >> 2009/11/15 14:54:36.457 2 Toolkit.cxx(289) >> Network=x.x.x.64/255.255.255.224, IP=x.x.x.66 >> 2009/11/15 14:54:36.457 2 Toolkit.cxx(289) >> Network=127.0.0.0/255.0.0.0, IP=127.0.0.1 >> 2009/11/15 14:54:36.457 2 Toolkit.cxx(290) Default > IP=x.x.x.66 >> 2009/11/15 14:54:36.457 2 Toolkit.cxx(289) >> Network=x.x.x.64/255.255.255.224, IP=x.x.x.68 >> 2009/11/15 14:54:36.457 2 Toolkit.cxx(290) Default > IP=x.x.x.66 >> >> Logging from version 2.2.7 shows that it was using x.x.x.68 as 'Default > IP'. >> >> Later I've found that version 2.2.8 introduced Bind= parameter, which >> I tried to use, but it does not make any difference in my case. >> Could anyone advise please what should be done to fix this? >> >> Current snippet of my ini file: >> >> [Gatekeeper::Main] >> Fourtytwo=42 >> Name=OpenH323GK-68 >> Home=x.x.x.68 >> Bind=x.x.x.68 >> NetworkInterfaces=x.x.x.68/27 >> TotalBandwidth=-1 >> [RoutedMode] >> GKRouted=1 >> H245Routed=1 >> CallSignalPort=1720 >> [Proxy] >> Enable=1 >> InternalNetwork= >> ProxyForNAT=1 >> ProxyAlways=1 >> >> >> Regards, >> Vladyslav > > -- > Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/ > > ---------------------------------------------------------------------------- > -- > Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day > trial. Simplify your report design, integration and deployment - and focus > on what you do best, core application coding. Discover what's new with > Crystal Reports now. http://p.sf.net/sfu/bobj-july > _______________________________________________________ > > Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Archive: > http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users > Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users > Homepage: http://www.gnugk.org/ > > > ------------------------------------------------------------------------------ > Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day > trial. Simplify your report design, integration and deployment - and focus on > what you do best, core application coding. Discover what's new with > Crystal Reports now. http://p.sf.net/sfu/bobj-july > _______________________________________________________ > > Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users > Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users > Homepage: http://www.gnugk.org/ > ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
