Continuing with the post just for sharing the further proceedings with you guys. The config file additions were way too aheady than actually needed. We fine tuned [RoutedMode] sections in the configuration file: [RoutedMode] AcceptUnregisteredCalls=1 GKRouted=1 H245Routed=1 Along with this, we had to prioritize the 'G711 aLaw' in the first place and 'G711 uLaw' in the second, on both the endpoints. This combination did the trick. Vivek -----Original Message----- From: Vivek Dharmadhikari [mailto:vivek_dharmadhikari@xxxxxxxxxxxxxx] Sent: Wednesday, May 06, 2009 2:56 PM To: 'GNU Gatekeeper Users' Subject: RE: Call drop due to Disengage from VOIP Client Thanks Jan, Yes, I could have added some more traces to it, which I (wrongly) thought might lead to confusion. But on this site itself I found out a chain, the link of which is as follows: http://www.mail-archive.com/openh323gk-users@xxxxxxxxxxxxxxxxxxxxx/msg01735. html This helped me to get rid of the problem. In short, our configuration was changed as follows: [Gatekeeper::Main] Fourtytwo=42 Name=OpenH323GK [GkStatus::Auth] rule=allow [RasSrv::GWPrefixes] Gesprek1=0,1,2,3,4,5,6,7,8,9 [RasSrv::ARQFeatures] CallUnregisteredEndpoints=1 ArjReasonRouteCallToGatekeeper=0 [RoutedMode] AcceptUnregisteredCalls=1 GKRouted=1 H245Routed=1 CallSignalHandlerNumber=15 AcceptNeighborsCalls=1 AcceptUnregisteredCalls=1 RemoveH245AddressOnTunneling=1 RemoveCallOnDRQ==0 DropCallsByReleaseComplete=1 SendReleaseCompleteOnDRQ=1 SupportNATedEndpoints=1 SupportCallingNATedEndpoints=1 TreatUnregisteredNAT=1 TranslateFacility=1 ActivateFailover=1 EnableH450.2=1 [RasSrv::PermanentEndpoints] 192.168.5.57=Gesprek1;1010, 84 192.168.5.142:1720=101 192.168.5.193:1720=102 192.168.5.84:1720=103 This did the trick. Thank to all direct-indirect helpers. Vivek -----Original Message----- From: Jan Willamowius [mailto:jan@xxxxxxxxxxxxxx] Sent: Wednesday, May 06, 2009 2:24 PM To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Subject: Re: Call drop due to Disengage from VOIP Client Hi Vivek, you have to find out why your endpoint is sending the disengage. We can't see that from the 2 line trace snippet. As a wild guess, I would check for NAT/firewall issues that prevent the endpoints from connecting, but there are a million other possibilities. Regards, Jan Vivek Dharmadhikari wrote: > Following is the configuration of our gnugk: > > [Gatekeeper::Main] > Fourtytwo=42 > Name=OpenH323GK > > [GkStatus::Auth] > rule=allow > > [RasSrv::GWPrefixes] > Gesprek1=0,1,2,3,4,5,6,7,8,9 > > > [RasSrv::ARQFeatures] > CallUnregisteredEndpoints=1 > > [RoutedMode] > AcceptUnregisteredCalls=1 > > [RasSrv::PermanentEndpoints] > 192.168.5.57=Gesprek1;1010, 84 > 192.168.5.142:1720=101 > 192.168.5.193:1720=102 > 192.168.5.84:1720=103 > > > Endpoint 101 runs Ekiga whereas endpoint 103 runs MyPhone. The call > 101-->103 is successful. But call 103-->101 is not completed. The logs shown > on gnugk are as follows: > > 2009/05/06 13:41:07.671 2 RasSrv.cxx(170) RAS Read from > 192.168.5.84:2090 > 2009/05/06 13:41:07.687 3 RasSrv.cxx(209) RAS disengageRequest > { > .... > disengageReason = normalDrop <<null>> > ... > terminationCause = releaseCompleteReason undefinedReason <<null>> > > This depicts that the 103 client (call initiator) is dropping the call. Can > anyone explain the reason why this happens? > > Vivek -- Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/ ---------------------------------------------------------------------------- -- The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/ Disclaimer: The information contained in this e-mail and attachments if any are privileged and confidential and are intended for the individual(s) or entity(ies) named in this e-mail. If the reader or recipient is not the intended recipient, or employee or agent responsible for delivering to the intended recipient, you are hereby notified that dissemination, distribution or copying of this communication or attachments thereof is strictly prohibited. IF YOU RECEIVE this communication in error, please immediately notify the sender and return the original message. ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
