Hi Vivek,
you have to find out why your endpoint is sending the disengage. We
can't see that from the 2 line trace snippet.
As a wild guess, I would check for NAT/firewall issues that prevent the
endpoints from connecting, but there are a million other possibilities.
Regards,
Jan
Vivek Dharmadhikari wrote:
> Following is the configuration of our gnugk:
>
> [Gatekeeper::Main]
> Fourtytwo=42
> Name=OpenH323GK
>
> [GkStatus::Auth]
> rule=allow
>
> [RasSrv::GWPrefixes]
> Gesprek1=0,1,2,3,4,5,6,7,8,9
>
>
> [RasSrv::ARQFeatures]
> CallUnregisteredEndpoints=1
>
> [RoutedMode]
> AcceptUnregisteredCalls=1
>
> [RasSrv::PermanentEndpoints]
> 192.168.5.57=Gesprek1;1010, 84
> 192.168.5.142:1720=101
> 192.168.5.193:1720=102
> 192.168.5.84:1720=103
>
>
> Endpoint 101 runs Ekiga whereas endpoint 103 runs MyPhone. The call
> 101-->103 is successful. But call 103-->101 is not completed. The logs shown
> on gnugk are as follows:
>
> 2009/05/06 13:41:07.671 2 RasSrv.cxx(170) RAS Read from
> 192.168.5.84:2090
> 2009/05/06 13:41:07.687 3 RasSrv.cxx(209) RAS disengageRequest
> {
> ....
> disengageReason = normalDrop <<null>>
> ...
> terminationCause = releaseCompleteReason undefinedReason <<null>>
>
> This depicts that the 103 client (call initiator) is dropping the call. Can
> anyone explain the reason why this happens?
>
> Vivek
--
Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________________
Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
