Hi Charles, since you say you are running this over a VPN anyway, why don't you connect all endpoints to one gatekeeper that runs in routed-mode ? That way only the signaling would go through a central office, but media would go directly. Regards, Jan Charles McLaughlin wrote: > Hi, > > I'd like some help and advice on GnuGK. I have three offices and each > one has a Polycom VSX 7000 video conference unit. The offices are > connected by a VPN, so the Polycom units currently communicate directly > without a gatekeeper. I'm experimenting with GnuGK to make it easier > for my staff to use H323 desktop software such as Ekiga or Xmeeting to > connect to the Polycom units. > > So far I've followed section 5 of the manual (Routed Mode and Proxy > Configuration) and also section 6 (Routing). I got the routed/proxy > configuration working. Thanks. A user can video conference with the > Polycom unit in that office from their desktop through the gatekeeper. > But I only have this setup for one office - I don't want to route/proxy > all of the H323 traffic from the three offices through any one office. > And this breaks the Polycom units from talking to each other since > they're not all registered with that one gatekeeper. > > So I think I'll need to run a GnuGK instance in each office. I've > looked at the "neighbor" functionality, but can't figure out how to > proceed. Do I need to add some config options so that if someone in > office A tries to connect to a video conference unit in office B or > office C the gatekeeper in office A will forward the request to the > gatekeepers in office B or C? How do I do that? > > Thanks, > Charles -- Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/ ------------------------------------------------------------------------------ _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
