Hi, you can set the prefix priority in the [EP::...] section using GatewayPrefixes=. See http://www.gnugk.org/gnugk-manual-11.html#ss11.1 Regards, Jan Dmitry Melekhov wrote: > Hello! > > > Part of our phone networks looks as following: > > > voip--->cisco3845<--isdn pri-->avaya definity<---isdn pri--->avaya > definity<--isdn pri-->cisco 2811<---voip > > Let's assume one definity has numbers 60xx and another has 40xx. > Any call from voip can be handled by cisco 3845 or 2801, so they have > tech prefixes 40 and 60. > But this will be good if calls to 60xx will go to 3845 and to 40xx to > 2811 until there is capacity to reduce load to > isdn pri link beetween definity. > I found only gateway priority in gnugk configuration :-( > Is is possible to set prefix priority? > > Thank you! > > P.S. > at first I sended this message to developers mail by mistake :-( -- Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/ ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
