In our network, Q931 DCC 41 usually occurs from the endpionts when the line
signal on a particular port cannot be detected. You could enable the "who
disconnected" (%r) cdr field, which will tell you who is generating the
error, and can lead to better troubleshooting.
Regards
HASSAAN
----- Original Message -----
From: "Zygmuntowicz Michal" <m.zygmuntowicz@xxxxxxx>
To: <openh323gk-users@xxxxxxxxxxxxxxxxxxxxx>
Sent: Monday, May 29, 2006 16:55
Subject: Re: Temporary failure!!
> Maybe your PDD is longer than 15secs? Try to increase
> SignalTimeout variable (not present in your config).
> Another reason may be failing auth/acct backend, like
> nonresponding RADIUS server.
>
> ----- Original Message -----
> From: "Dani Popa" <dani.popa@xxxxxxxxx>
> Sent: Monday, May 29, 2006 9:55 AM
>
>
> > Hi,
> > i use gnugk 2.2.3 in routed mode. Asr is very low. Many calls are
> > failure with code 41 (temporary failure) disconnected by gatekeeper.
> >
> > Some logs from cdr.txt:
> > CDRString=%{connect-time}|%{disconnect-time}|%t|%{ring-time}|%d|%r|%c
> >
> > |07:57:25.000 EEST Mon May 01 2006|15|0|0|0|41
> > |07:57:38.000 EEST Mon May 01 2006|15|0|0|0|41
> > |07:58:14.000 EEST Mon May 01 2006|15|0|0|0|41
> > |07:58:51.000 EEST Mon May 01 2006|15|0|0|0|41
> > |08:02:04.000 EEST Mon May 01 2006|15|0|0|0|41
> > |08:02:48.000 EEST Mon May 01 2006|15|0|0|0|41
> > |08:03:02.000 EEST Mon May 01 2006|15|0|0|0|41
> > |08:03:30.000 EEST Mon May 01 2006|15|0|0|0|41
> >
> >
> > some conf:
> >
> > ListenQueueLength=1024
> > SignalReadTimeout=3000
> > StatusReadTimeout=5000
> >
> > [RoutedMode]
> > GKRouted=1
> > H245Routed=0
> > CallSignalPort=1720
> > CallSignalHandlerNumber=1
> > RemoveH245AddressOnTunneling=1
> > AcceptNeighborsCalls=1
> > SupportNATedEndpoints=1
> > DropCallsByReleaseComplete=1
> > RemoveCallOnDRQ=1
> > SendReleaseCompleteOnDRQ=1
> > ScreenDisplayIE=gdcgk1
> > ForwardOnFacility=1
> > Q931PortRange=20000-29999
> > H245PortRange=30000-39999
> >
> > [Proxy]
> > Enable=0
> > ProxyForNAT=0
> > ProxyForSameNAT=0
> >
> >
> >
> > #PRIORITIES
> > [EP::aaa]
> > Capacity=30
> > GatewayPriority=2
> > [EP::bbb]
> > Capacity=30
> > GatewayPriority=1
> > [EP::ccc]
> > Capacity=120
> > GatewayPriority=3
> >
> >
> > Can any one explain what is wrong ?
> >
> > Thank you !
>
>
>
> -------------------------------------------------------
> All the advantages of Linux Managed Hosting--Without the Cost and Risk!
> Fully trained technicians. The highest number of Red Hat certifications in
> the hosting industry. Fanatical Support. Click to learn more
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=107521&bid=248729&dat=121642
> _______________________________________________________
>
> Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
> Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
> Homepage: http://www.gnugk.org/
>
-------------------------------------------------------
All the advantages of Linux Managed Hosting--Without the Cost and Risk!
Fully trained technicians. The highest number of Red Hat certifications in
the hosting industry. Fanatical Support. Click to learn more
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=107521&bid=248729&dat=121642
_______________________________________________________
Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
