Re: Re: Calls from H323 to PSTN (to Teodor Georgiev)

Luis Fernando Ramírez Cueva <lufer_ramirez@xxxxxxxx> · Mon, 17 Apr 2006 15:45:27 +0200 (CEST)

Hi Teodor, I have troubles with the siemens HG1500 yet.. Some days ago I send Another post with this problem and someone said me that there are not probem with the configuration, But I am confused. Help me please... This is the last post that I sent....

  I am configuring the module HG1500 with the gnugk. I read some post in this list but I 
  have an unconnected call. 

  When I put the rv command on the status port I have:

  rv
AllRegistrations
RCF|172.16.21.208:1720|lframirez:h323_ID|terminal|1128_endp
Wed, 05 Apr 2006 23:17:14 -0500 C(0/1/21)  <1>
RCF|172.16.21.152:1720|Cisco:h323_ID|terminal|1131_endp
Wed, 05 Apr 2006 23:17:59 -0500 C(0/1/14)  <1>
RCF|172.16.1.69:1720|3333:dialedDigits|gateway|1135_endp
Wed, 05 Apr 2006 23:17:09 -0500 C(0/0/1)  <1>
Prefixes: 28,26
Number of Endpoints:
 3
;
RCF|172.16.1.69:1720|3333:dialedDigits|gateway|1135_endp;
RCF|172.16.1.69:1720|3333:dialedDigits|gateway|1135_endp;
RCF|172.16.1.69:1720|3333:dialedDigits|gateway|1135_endp;
  The HG1500 registered with the gnugk each 60 seconds

  THIS IS MY CONFIG FILE

  [RasSrv::GWPrefixes]
3333=28,26

[RasSrv::ARQFeatures]
ArjReasonRouteCallTosCN=0
ArjReasonRouteCallToGatekeeper=1
RemoveTrailingChar=#

[RasSrv::RRQFeatures]
AcceptGatewayPrefixes=0

[CallTable]
GenerateNBCDR=1
GenerateUCCDR=1
DefaultCallTimeout=1800TimestampFormat=MySQL

[RoutingPolicy::OnARQ]
default=vqueue,internal

   When I cal from lframirez to 2639 I have the following output on the status port

 ACF|172.16.21.208:1720|1128_endp|20808|2639:dialedDigits|lframirez:h323_ID|false;
CDR|42|38 71 20 1b 82 f5 18 10 8e 76 00 11 25 4b fa 52|0|unconnected|2006-04-05 23:24:24|172.16.21.208:1408|1128_endp|172.16.1.69:1720|1135_endp|2639:dialedDigits|lframirez:h323_ID|GKUTPL;
DCF|172.16.21.208|1128_endp|20808|normalDrop;
  Someone, maybe can help me please. What Happened?

  Regards
  Luis Ramírez

Teodor Georgiev <tgeorgiev@xxxxxxxxx> escribió:

Hi,

I was browsing my mail archives and saw your letter. Accidentally I have 
missed it. Do you still have troubles with the HiPath and GnuGK ?

On Thursday 23 February 2006 02:25, Luis Fernando Ramírez Cueva wrote:
> Hi,
>
> Thanks Teodor for your answer. I am not sure
 the
> version of HG1500 (I am searching it), but....
>
> - I have registered the HG1500 module into the gnugk,
> the HG1500 module registered into the gnugk
> automatically with the alias "3333" that I
> configured
> into the HG manager.
> - When I put the rv command from status port, the
> alias
> is "3333:dialedDigits" and when I put the fv
> command,
> it is encountered. The HG module always registered
> into the gnugk as a gateway.
>
> - I put the this route in the .ini file
> [RasSrv::GWPrefixes]
> 3333=28,26
>
> - and also I put this line that I encountered in the
> list. This is the line:
>
> [RasSrv::RRQFeatures]
> AcceptGatewayPrefixes=0
>
> - When I call from a softphone (Gnomemeeting) to a
> phone with prefix 26, the ggnugk finds
> the phone with prefix 26,also the gnugk throw an
> CDR message...
 similar to it:
>
> CDR|CallNo|CallId|Duration|Starttime|.....
>
> |Endtime|CallerIP|
>
> But, in the field Starttime show "Unconnected"
> and the phone with prefix 26 don't ring
>
> I need your help... I am not sure what Happen
>
> THANKS A LOT
> BYE
>
> > > De: Teodor Georgiev 
> >
> > Para: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> > Asunto: Re:  Calls from H323 to
> > PSTN
> > Fecha: Tue, 21 Feb 2006 10:28:17 +0200
> >
> >
> >
> >
> > Hi,
> >
> > its me, indeed, who wrote this document :)
> > You should check first which version of the HG1500
> > module you posses - 2 or 3?
> >
> > Lets suppose, you have registered the HG1500 module
> > into GnuGK with an H.323
> > alias of
 "hicom".
> >
> > Then in the gnugk config file, in section
> > [RasSrv::GWPrefixes], enter
> > something like:
> >
> > [RasSrv::GWPrefixes]
> > hicom=93
> >
> > Then, calls coming into GnuGK with prefix of 93
> > shall be routed to the HG1500
> > module.
> >
> > Of course, this is a very basic step. You should
> > read the complete GnuGK
> > manual in order to go with a stable working and
> > secure configuration :)
> >
> > On Monday 20 February 2006 18:10, Luis Fernando
> >
> > Ramírez Cueva wrote:
> > > Hi all, I have a siemmens hipath 3000 with a HG
> >
> > 1500
> >
> > > module hardware. I read the config notes available
> >
> > in
> >
> > > http://www.gnugk.org/gnugk-siemens-hipath.html but
>
 >
> > I
> >
> > > only
> > > can register it with the gnugk. I don't understand
> >
> > how
> >
> > > configure the routes in gnugk to send the calls to
> >
> > PBX
> >
> > > Someone have a more specific configuration for
> >
> > that...
> >
> > > Thank a lot
> > > This is really URGENT
> > > Bye
> > >
> > >
> > >
> > > ______________________________________________
> > > LLama Gratis a cualquier PC del Mundo.
> > > Llamadas a fijos y móviles desde 1 céntimo por
> >
> > minuto.
> >
> > > http://es.voice.yahoo.com
>
> ______________________________________________
> LLama Gratis a cualquier PC del Mundo.
> Llamadas a fijos y móviles desde 1 céntimo por
 minuto.
> http://es.voice.yahoo.com
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by xPML, a groundbreaking scripting language
> that extends applications into web and mobile media. Attend the live
> webcast and join the prime developer group breaking into this new coding
> territory!
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
> _______________________________________________________
>
> Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
> Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
> Homepage: http://www.gnugk.org/

-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications
 into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642
_______________________________________________________

Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id?49
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/

LLama Gratis a cualquier PC del Mundo.
Llamadas a fijos y móviles desde 1 céntimo por minuto.
http://es.voice.yahoo.com