|
I was wondering if there's any way for gnugk when
in proxy mode to do h.245 tunneling.
My problem is pretty weird ... I have a PBX on a
primary qsig interface to a Cisco AS5350.
When a call arrives on that interface to a busy
number, I get:
Cause i
= 0x8191 - User busy
Progress Ind i = 0x8188 - In-band info or appropriate now available *Mar 8 13:20:48 EET: ISDN Se3/3:15 Q931: call_disc: Global disconnect configured; Postpone sending RELEASE for callid 0xE7AA This will not close the call until the isdn timer
expires.
If I don't configure isdn global-disconnect on the
interface, I get the same result with this message:
Cause i
= 0x8191 - User busy
Progress Ind i = 0x8188 - In-band info or appropriate now available *Mar 8 12:45:43 EET: ISDN Se3/3:15 Q931: call_disc: PI received in disconnect; Postpone sending RELEASE for callid 0xE786 But this only happens for calls from gnugk.
For calls coming from other cisco equipments that
have h245 tunneling enabled, the user receives "user busy"
Cause i
= 0x8191 - User busy
Progress Ind i = 0x8188 - In-band info or appropriate now available *Mar 8 14:58:51 EET: ISDN Se3/3:15 Q931: call_disc: Global disconnect configured; Postpone sending RELEASE for callid 0xE7F7 *Mar 8 14:58:51 EET: ISDN Se3/3:15 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x67BE This is very weird, but this is the only difference
between calls coming from gnugk in proxy mode and calls comming from other cisco
equipt.
Any ideea ?
|
