Try a 'make clean' before the ./configure
C. Ed Felt wrote:
I am at the last step of compiling your patch to fix the bad NAT
request issue and appear to be having the same problem as:
http://www.openh323.org/pipermail/openh323/Week-of-Mon-20051031/075341.html
But I see no resolution reply to his request.
Here is my detail:
[root@200 openh323gk-2.2.3]# pwd
/root/tmp/newgk2006-02-16/openh323gk-2.2.3
[root@200 openh323gk-2.2.3]# ./configure
loading cache ./config.cache
...
creating ./config.status
creating Makefile
[root@200 openh323gk-2.2.3]# make
...
make[2]: Entering directory
`/root/tmp/newgk2006-02-16/openh323gk-2.2.3'
make[2]: *** No rule to make target
`/usr/local/share/pwlib//lib/libpt_linux_x86_r.so', needed by
`versionts.h'. Stop.
make[2]: Leaving directory
`/root/tmp/newgk2006-02-16/openh323gk-2.2.3'
make[1]: *** [optshared] Error 2
make[1]: Leaving directory
`/root/tmp/newgk2006-02-16/openh323gk-2.2.3'
make: *** [bothshared] Error 2
Please also note:
[root@200 openh323gk-2.2.3]# locate libpt_linux_x86_r.so
/root/tmp/newgk2006-02-16/pwlib_v1_9_2/lib/libpt_linux_x86_r.so.1.9.2
/root/tmp/newgk2006-02-16/pwlib_v1_9_2/lib/libpt_linux_x86_r.so
/root/tmp/newgk2006-02-16/pwlib_v1_9_2/lib/libpt_linux_x86_r.so.1
/root/tmp/newgk2006-02-16/pwlib_v1_9_2/lib/libpt_linux_x86_r.so.1.9
/usr/local/lib/libpt_linux_x86_r.so.1.9.2
/usr/local/lib/libpt_linux_x86_r.so.1.9
/usr/local/lib/libpt_linux_x86_r.so.1
/usr/local/lib/libpt_linux_x86_r.so
We are running RHE 3
Is there an easy way to specify to location of the
libpt_linux_x86_r.so file in the make command?
As far as I can tell I have all the latest libraries required
installed. Thanks again for your help. I installed both pwlib and
openh323 libraries successfully.
Work Signature
Thanks,
C. Ed Felt Caflo Network Engineer/Programmer
(801) 766-8433 (home)
(801) 420-8879 (cell)
74999 (h.323)
74777 (sip)
edeefelt@xxxxxxxxxxx
efelt@xxxxxxxxxxxx
chat: edeefelt(aim), edeefelt (yahoo), edeefelt@xxxxxxxxxxx (msn),
v_2chafe@xxxxxxxxxxx (msn)
http://www.thefelts.net
Jan Willamowius wrote:Use something like "patch < NatAware.txt" and
recompile GnuGk.
C. Ed Felt wrote:
Sorry to bother you again:
How do I apply the patch "NatAware.txt"? Just put it in the source
directory and make again or are there special command line
parameters I
should use on ./configure or make?
Work Signature
Thanks,
C. Ed Felt Caflo Network Engineer/Programmer
(801) 766-8433 (home)
(801) 420-8879 (cell)
74999 (h.323)
74777 (sip)
edeefelt@xxxxxxxxxxx
efelt@xxxxxxxxxxxx
chat: edeefelt(aim), edeefelt (yahoo), edeefelt@xxxxxxxxxxx (msn),
v_2chafe@xxxxxxxxxxx (msn)
http://www.thefelts.net
Jan Willamowius wrote:Sorry, try this link:
http://sourceforge.net/tracker/index.php?func=detail&aid=1421117&group_id=4797&atid=304797
C. Ed Felt wrote:
Jan:
Thanks for the information. I looked at the link you posted below but
do not see a patch on the page:
http://sourceforge.net/mailarchive/forum.php?thread_id=9573995&forum_id=8549
Can you please send a link with the current patch you are referring
to? The page you sent does not have a patch on it but refers to a
possible setting fix:
"Hi,
the Statustracelevel setting could be a cause for slowdown.
Try Statustracelevel=2
Regards,
Jan"
Is this what you are referring to?
There is a page of patches I found for gnugk, but I'm not sure which
one you think would help us:
http://sourceforge.net/tracker/?group_id=4797&atid=304797
Thanks again for your help.
Work Signature
Thanks,
C. Ed Felt Caflo Network Engineer/Programmer
(801) 766-8433 (home)
(801) 420-8879 (cell)
74999 (h.323)
74777 (sip)
edeefelt@xxxxxxxxxxx
efelt@xxxxxxxxxxxx
chat: edeefelt(aim), edeefelt (yahoo), edeefelt@xxxxxxxxxxx (msn),
v_2chafe@xxxxxxxxxxx (msn)
http://www.thefelts.net
Jan Willamowius wrote:Hi,
would you be able to apply a patch to the latest GnuGk source code,
recompile and see if it fixes your crash ?
Here is the patch
http://sourceforge.net/mailarchive/forum.php?thread_id=9573995&forum_id=8549
Thanks a lot,
Jan
C. Ed Felt wrote:
We are having an issue that may be similar to the one in this
archive:
http://sourceforge.net/mailarchive/forum.php?thread_id=9573995&forum_id=8549
Gnugk is crashing seemingly at random times. In watching the
status
monitor it seems to crash when there are high call volumes, but
we
have
not been able to verify this. We are currently running 2.2.2 and
are
using a system to restart it automatically when it crashes
("monit").
We would like to figure out what is causing it to crash so that we can
use it in our carrier grade platform. We have tried setting the
verbosity of the debug to a very high level to try and capture the
error, but the log doesn't appear to help us much (no errors that
stand
out at "-ttttt" verbosity saved to a log).
I am listing the last hundred lines of the log file (up to the time
of
crash) as well as our config file below. Please let me know if
you
would like the entire log file or more information. Thank you in
advance for your help. "X" in the config represents the info that
would
be there that we know allready works.
################################CONFIG################################
[Gatekeeper::Main]
Home=X <IP of NIC we want GNUGK to run on on the server)
Name=X
TimeToLive=60
[RoutedMode]
GKRouted=1
SupportNATedEndpoints=1
CallSignalPort=1720
AcceptUnregisteredCalls=0
AcceptNeighborsCalls=1
[GkStatus::Auth]
rule=password
keyfilled=X
X=x
X=x
[RasSrv::GWPrefixes]
X=X ... etc
[RasSrv::PermanentEndpoints]
X=X ... etc
[RasSrv::GWRewriteE164]
X=in=4=011542234
[RasSrv::RewriteE164]
X=X ... etc
[Proxy]
Enable=0
[Gatekeeper::Acct]
FileAcct=required
SQLAcct=required;start,update,stop
[FileAcct]
DetailFile=/gnugk/log/cdr.log
Rotate=L10000
[SQLAcct]
Driver=MySQL
Host=127.0.0.1
Database=caflobvi
Username=X
Password=X
StartQuery=INSERT INTO call (gkname, sessid, callno, username,
calling, called, duration, disconnectcause, TimeStamp,
long_distance,
rated, DESCRIPTION, ip) VALUES ('%g', '%s', %n, '%u',
'%{Calling-Station-Id}', '%{Called-Station-Id}', '%d', '%c', NOW(),
IF(%{Called-Station-Id} REGEXP '^[01689]','1','0'),
IF(%{Called-Station-Id} REGEXP '^[01689]','0','1'),
IF(%{Called-Station-Id} REGEXP '^[01689]','0','Llamada iPort On Net'),
'%{caller-ip}')
StartQueryAlt=UPDATE call SET username = '%u', calling =
'%{Calling-Station-Id}', called = '%{Called-Station-Id}', duration
= %d,
disconnectcause = %c WHERE gkname = '%g' AND sessid = '%s'
UpdateQuery=UPDATE call SET duration = %d, call_done = '1' WHERE
gkname = '%g' AND sessid = '%s'
StopQuery=UPDATE call SET call_done = '1', username = '%u', calling
=
'%{Calling-Station-Id}', called = '%{Called-Station-Id}',
duration
= %d,
disconnectcause = %c WHERE gkname = '%g' AND sessid = '%s'
StopQueryAlt=INSERT INTO call (gkname, sessid, callno, username,
calling, called, duration, disconnectcause, call_done) VALUES
('%g',
'%s', %n, '%u', '%{Calling-Station-Id}', '%{Called-Station-Id}', %d,
%c,
'1')
[Gatekeeper::Auth]
RadAliasAuth=sufficient;RRQ,ARQ
default=allow
[RadAliasAuth]
Servers=127.0.0.1
LocalInterface=127.0.0.1
RadiusPortRange=10000-11000
DefaultAuthPort=1812
SharedSecret=X
RequestTimeout=2000
IdCacheTimeout=9000
SocketDeleteTimeout=60000
RequestRetransmissions=1
RoundRobinServers=1
AppendCiscoAttributes=1
IncludeTerminalAliases=1
IncludeEndpointIP=1
[RasSrv::Neighbors]
X1=CiscoGK
X2=CiscoGK
X3=CiscoGK
[Neighbor::X1]
GatekeeperIdentifier=X1
Host=X
AcceptForwardedLRQ=1
SendPrefixes=10500#
ForwardResponse=1
ForwardLRQ=always
ForwardHopCount=3
[Neighbor::X2]
GatekeeperIdentifier=X2
Host=X
AcceptPrefixes=
AcceptForwardedLRQ=1
ForwardResponse=1
ForwardLRQ=always
ForwardHopCount=3
[Neighbor::X3]
GatekeeperIdentifier=X3
Host=X
AcceptForwardedLRQ=1
SendPrefixes=669
ForwardResponse=1
ForwardLRQ=always
ForwardHopCount=3
################################DEBUG: LAST 100
LINES################################
[ed@localhost 2006-01-31]$ tail -n 100 look2006-01-30.log
0070 006c 0061 006e 006e 006f 0031 planno1
}
[1]=dialedDigits "74081"
[2]=dialedDigits "74078"
[3]=dialedDigits "74079"
[4]=dialedDigits "74080"
}
gatekeeperIdentifier = 8 characters {
0063 0061 0066 006c 006f 0067 006b 0034 caflogk4
}
endpointVendor = {
vendor = {
t35CountryCode = 0
t35Extension = 0
manufacturerCode = 0
}
productId = 4 octets {
34 46 58 53 4FXS
}
versionId = 3 octets {
32 30 35 205
}
}
timeToLive = 60
keepAlive = TRUE
endpointIdentifier = 9 characters {
0039 0037 0030 0033 005f 0065 006e 0064 9703_end
0070 p
}
willSupplyUUIEs = FALSE
maintainConnection = FALSE
}
2006/01/31 14:50:35.016 5 job.cxx(352) JOB Worker
threads: 10 total - 6 busy, 4 idle
2006/01/31 14:50:35.016 5 job.cxx(180) JOB
Starting Job RRQ at Worker thread 4964360
2006/01/31 14:50:35.016 1 RasSrv.cxx(330) RAS RRQ
Received
2006/01/31 14:50:35.017 3 RasSrv.cxx(221) RAS Send
to 201.128.168.187:1034
registrationConfirm {
requestSeqNum = 29083
protocolIdentifier = 0.0.8.2250.0.4
callSignalAddress = 1 entries {
[0]=ipAddress {
ip = 4 octets {
c8 44 57 73 .DWs
}
port = 1720
}
}
terminalAlias = 5 entries {
[0]=h323_ID 7 characters {
0070 006c 0061 006e 006e 006f 0031 planno1
}
[1]=dialedDigits "74081"
[2]=dialedDigits "74078"
[3]=dialedDigits "74079"
[4]=dialedDigits "74080"
}
gatekeeperIdentifier = 8 characters {
0063 0061 0066 006c 006f 0067 006b 0034 caflogk4
}
endpointIdentifier = 9 characters {
0039 0037 0030 0033 005f 0065 006e 0064 9703_end
0070 p
}
timeToLive = 60
willRespondToIRR = FALSE
maintainConnection = FALSE
}
2006/01/31 14:50:35.017 5 RasSrv.cxx(235) RAS Sent
Successful
2006/01/31 14:50:35.017 5 job.cxx(415) JOB Job
RRQ deleted
2006/01/31 14:50:35.017 5 job.cxx(404) JOB
Worker
threads: 10 total - 5 busy, 5 idle
2006/01/31 14:50:35.186 5 yasocket.cxx(709) GkStatus 1
sockets selected from 3, total 3/0
2006/01/31 14:50:35.187 5 job.cxx(352) JOB
Worker
threads: 10 total - 6 busy, 4 idle
2006/01/31 14:50:35.187 5 job.cxx(180) JOB
Starting Job StatusCmd !! at Worker thread 4964360
2006/01/31 14:50:35.187 5 GkStatus.cxx(1018) STATUS Got
command !! from client 68.157.82.98:3463
2006/01/31 14:50:35.187 5 yasocket.cxx(709) GkStatus 1
sockets selected from 3, total 3/0
2006/01/31 14:50:35.187 3 SoftPBX.cxx(80) GK
SoftPBX: PrintCurrentCalls
2006/01/31 14:50:35.189 5 job.cxx(415) JOB Job
StatusCmd !! deleted
2006/01/31 14:50:35.189 5 job.cxx(404) JOB
Worker
threads: 10 total - 5 busy, 5 idle
2006/01/31 14:50:35.475 5 yasocket.cxx(709) TCPServer 1
sockets selected from 2, total 2/0
2006/01/31 14:50:35.475 4 yasocket.cxx(816) TCP
Accept
request on 200.68.87.115:1720
2006/01/31 14:50:35.475 5 job.cxx(352) JOB
Worker
threads: 10 total - 6 busy, 4 idle
2006/01/31 14:50:35.475 5 job.cxx(180) JOB
Starting Job Acceptor at Worker thread 4964360
2006/01/31 14:50:35.485 5 ProxyChannel.cxx(501) Q931s
Reading from 201.128.168.187:1833
2006/01/31 14:50:35.485 3 ProxyChannel.cxx(744) Q931s
Received: Information CRV=0 from 201.128.168.187:1833
2006/01/31 14:50:35.486 4 ProxyChannel.cxx(686) Q931
Received: {
q931pdu = {
protocolDiscriminator = 8
callReference = 0
from = originator
messageType = Information
IE: Call-State = {
09 .
}
IE: Facility = {
39 37 30 33 5f 65 6e 64 70 9703_endp
}
}
}
2006/01/31 14:50:35.486 3 ProxyChannel.cxx(1896) Q931s
201.128.168.187:1833 NAT Information message from EPID = 9703_endp
2006/01/31 14:50:35.486 3 RasTbl.cxx(255) Q931 NAT
socket detected at 201.128.168.187:1833 for endpoint 9703_endp
--
Work Signature
Thanks,
C. Ed Felt Caflo Network Engineer/Programmer
efelt@xxxxxxxxxxxx
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________________
Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
