RE: Re~Child gnugk doesn't use public ip to register to parent gnugk

["Frank Fischer" <frank.fischer@xxxxxxxxxxxxxxxx>]

Check the gnugk website. As far as i remember, others with the same questions had been told on this mailing list, that there is a special docu on the gnugk website that describes how to deal with that problem.

- Frank

 

---

From: openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx [mailto:openh323gk-users-admin@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of Athahira
Sent: Tuesday, January 17, 2006 9:28 PM
To: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Subject: Re~Child gnugk doesn't use public ip to register to parent gnugk

Dear All,

 

I have setup my gnugk as endpoint to register to a Parent gnugk , and it register successfully .

 

The problem is my child gnugk uses its local ip ( 10.0.0.3 ) and does not use my public ip ( 207.x.x.x) when register , and the only solution to make it use the public ip is to make my gnugk listen to this public ip

 

[Gatekeeper::Main]
Home=207.x.x.x

 

But the problem with this is my public ip is Dynamic (through ADSL pppoe connection) and changes frequently.

 

Any suggestions ?

 

Rgds,

 

Athahira