I just added another feature that helps detect network problems: Now you can set the irrFrequency in ACF and check if both endpoint keep sending them periodically. This is especially usefull when you don't want a short TimeToLive for all endpoint registrations (eg. because they are idle most of the time and ypu don't want the load), but you want to monitor those involved in a call very closely. Its in both the 2.0 and 2.2 CVS branch. Check the manual on the [CallTable] section. Regards, Jan PS: I hear the SourceForge does maintenance and parts of the CVS may not be available today. Just try. Zygmuntowicz Michal wrote: > Make sure you have TimeToLive set to some reasonable > value in the config and your endpoints support ttl reregistration. > > ----- Original Message ----- > From: "Guaina Montoya Alejandro" <aguain@xxxxxxxxxxxx> > Sent: Monday, August 08, 2005 5:57 PM > > > I just started using the gatekeeper for a videoconference project > demonstration over at my company. > Everything works fine, except for when I accidentally disconnected the > Ethernet cable, so I had to restart the gatekeeper. > My question is, is there a way to tell all the endpoints to register > again? Or is that an endpoint problem, and therefore it doesn't concern > the gatekeeper? > > Alejandro Guaina -- Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/ ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
