Take a look at the manual and check the option CallUnregisteredEndpoints. If you are using 2.2, you may also need to add a 'dns' policy to your RoutingPolicy section. If you are using 2.0, you may need to enable ParseEmailAliases option. ----- Original Message ----- From: "Seán O'Brien" <sean.obrien@xxxxxxxxx> Sent: Thursday, January 20, 2005 4:55 PM > On Radvision gatekeepers there is an option to pass calls dialed with > an IP address. This allows an endpoint registered to the Rad Gatekeeper > to dial endpoints that are not registered to that gatekeeper or to any > gatekeeper. At the moment if one of my endpoints are registered to the > gnugk then they can only dial numbers that are registered to the > gatekeeper system (either directly registered or neighbours). I hope I've > explained the question clearly enough. If not please ask me to clarify. > > Yours, > Seán O'Brien > HEAnet ------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id?49 Homepage: http://www.gnugk.org/
