Pe 20 Jan 2005, la 13:49, Zygmuntowicz Michal <m.zygmuntowicz@xxxxxxx> a scris:
>
>1ST PROBLEM:
>You have wrong order of things here - you should really take
>a look at the manual - there is an example how to do this correctly.
>
>Basically, you need:
>[RasSrv::Neighbors]
>InterpointGKBuc001=CiscoGK
>
> [Neighbor::InterpointGKBuc001]
>
>what is pretty natural, as CiscoGK is only a type of neighbor
>and you can have multiple neighbors of this type.
Well, I did that, and it worked. Thanks. I do think that the manual is a bit vague at this point.
>
>2ND PROBLEM:
>Maybe you hit some bug, I'll check the sources. Make also sure
>that your gatekeeper is actually listening to the signalling port (1720 or
>1721).
Well, the log says listening to 1719 (U) and 1718 (MCast) and 7000 (status)... [panic] what should I do?! [reading the manual]
it says there that the signaling port is default 1720. I will explicitly put it in the config.
Nothing changed, nmap scanning shows all but 1719/udp ports closed. I don't know how else to check if the port is open.
Also did the same on [RoutedMode] with CallSignalPort=1721
The log says now that gnugk is listening on 1721. Also nmap shows 1721/tcp open.
so this is a bug, CallSignalPort must be explicitly set.
The LCF format remains unchanged, though, and the call does NOT go through.
>3RD PROBLEM:
>FileAcct will store accounting records only if a call is passing
>through the gatekeeper. If you are using direct mode and LRQ,
>the call will not go through the gatekeeper, rather directly
>to the termination gateway.
Hence my problem :)
>
>----- Original Message -----
>From: "Siderite" <Siderite@xxxxx>
>Sent: Thursday, January 20, 2005 11:58 AM
>
>
>> I am detailing a post (sent from another email address) to which
>> Michal told me to add more information:
>> As in the previous post I am trying to do 2 things:
>>
>> I. get calls transfered by a Cisco gatekeeper to a Cisco gateway through
>> the
>> GnuGK (GW1->CiscoGK->GnuGK->GW2)
>>
>> II. get a true record of the calls that go through GnuGK
>>
>> ======================
>>
>> To do that I followed the instructions in the manuals and configured
>> things like this:
>> CiscoGK has GnuGK set up as a remote zone (this config works with other
>> gatekeepers so I don't think there is any problem here)
>> GnuGk has CiscoGK set up as a neighbor
>>
>> 1ST PROBLEM:
>>
>> the new neighbor config system doesn't work:
>> [RasSrv::Neighbors]
>> CiscoGK=InterpointGKBuc001
>>
>> [Neighbor::CiscoGK]
>> Host=xxx.xxx.xxx.147
>> AcceptPrefixes=*
>> SendPrefixes=*
>> ForwardHopCount=2
>> ForwardLRQ=Always
>> ForwardResponse=1
>>
>> This is the GnuGK config and the log says, immediately after starting
>> the gatekeeper:
>> 2005/01/20 12:41:04.091 1 Neighbor.cxx(710) NB Can't get profile for
>> neighbor CiscoGK
>> 2005/01/20 12:41:04.091 1 Neighbor.cxx(159) NB Delete neighbor CiscoGK
>>
>> I used the old system and thus configured the neighbor like this:
>> [RasSrv::Neighbors]
>> InterpointGKBuc001=193.230.176.147;
>>
>> and it seems to be working.
>>
>> Then I configured the GnuGK to be in routed mode.
>> [RoutedMode]
>> GKRouted=1
>> H245Routed=1
>>
>> 2ND PROBLEM:
>>
>> When I send a call from GW1 it sends the LRQ to CiscoGK, then it goes to
>> the GnuGK and then a LCF is issued. The LCF looks like this:
>> locationConfirm {
>> requestSeqNum = 8177
>> callSignalAddress = ipAddress {
>> ip = 4 octets {
>> xx xx xx 17 ..w.
>> }
>> port = 0
>> }
>> rasAddress = ipAddress {
>> ip = 4 octets {
>> xx xx xx 17 ..w.
>> }
>> port = 1719
>> }
>> }
>>
>> The CallSignalAddress has port 0 !!!??? and the IP is the IP of GnuGK.
>>
>> A solution is to remove the routed mode, even if I do need the control
>> and information wealth that routed mode offers. Then the LCF looks like
>> this:
>> locationConfirm {
>> requestSeqNum = 8193
>> callSignalAddress = ipAddress {
>> ip = 4 octets {
>> xx xx xx 98 ....
>> }
>> port = 1720
>> }
>> rasAddress = ipAddress {
>> ip = 4 octets {
>> xx xx xx 17 ..w.
>> }
>> port = 1719
>> }
>> }
>> which is the correct way it should look, I guess, and the call is
>> transfered.
>>
>> 3RD PROBLEM:
>> I configured logging like this:
>> [CallTable]
>> GenerateUCCDR=1
>>
>> [Gatekeeper::Acct]
>> FileAcct=required;start,stop
>>
>> [FileAcct]
>> DetailFile=/usr/local/var/log/gnugk.detail.log
>> StandardCDRFormat=1
>> ;CDRString=%g|%n|%d|%c|%s|%u|%{CallId}|%{ConfId}|%{setup-time}|%{connect-time}|%{disconnect-time}|%{caller-ip}|%{caller-port}|%{callee-ip}|%{callee-port}|%{src-info}|%{dest-info}|%{Calling-Station-Id}|%{Called-Station-Id}
>>
>> The log file is generated, but nothing at all is written in the file.
>>
>> Please help!
>>
>> ==========================
>> detail gnugk config [routed mode]
>> [Gatekeeper::Main]
>> Fourtytwo=42
>> Name=gnugk
>>
>> [GkStatus::Auth]
>> rule=allow
>>
>> [RoutedMode]
>> GKRouted=1
>> H245Routed=1
>> ;AcceptNeighborsCalls=1
>> ;AcceptUnregisteredCalls=0
>> ;SupportNATedEndpoints=1
>> ;RemoveH245AddressOnTunneling=1
>> ;ForwardOnFacility=0
>>
>> [Proxy]
>> Enable=0
>> ;ProxyForNAT=1
>>
>> [RasSrv::GWPrefixes]
>> amir=074
>>
>> [RasSrv::PermanentEndpoints]
>> xxx.xxx.xxx.152=amir;074
>>
>> [RasSrv::Neighbors]
>> InterpointGKBuc001=xxx.xxx.xxx.147;
>>
>> [RasSrv::LRQFeatures]
>> NeighborTimeout=2
>> ForwardHopCount=2
>> CiscoGKCompatible=1
>> ;IncludeDestinationInfoInLCF=0
>>
>> [CallTable]
>> GenerateUCCDR=1
>>
>> [Gatekeeper::Acct]
>> FileAcct=required;start,stop
>>
>> [FileAcct]
>> DetailFile=/usr/local/var/log/gnugk.detail.log
>> StandardCDRFormat=0
>> CDRString=%g|%n|%d|%c|%s|%u|%{CallId}|%{ConfId}|%{setup-time}|%{connect-time}|%{disconnect-time}|%{caller-ip}|%{caller-port}|%{callee-ip}|%{callee-port}|%{src-info}|%{dest-info}|%{Calling-Station-Id}|%{Called-Station-Id}
>>
>> or
>>
>> StandardCDRFormat=1
>>
>> ==============================
>>
>> detail log [routed mode]:
>> 2005/01/20 12:20:56.339 4 RasSrv.cxx(199) RAS Receiving on
>> xxx.xxx.xxx.23:1718(Mcast)
>> 2005/01/20 12:20:56.340 2 RasSrv.cxx(168) RAS Read from
>> xxx.xxx.xxx.147:1719
>> 2005/01/20 12:20:56.358 3 RasSrv.cxx(207) RAS
>> locationRequest {
>> requestSeqNum = 8177
>> destinationInfo = 1 entries {
>> [0]=dialedDigits "0744325669"
>> }
>> nonStandardData = {
>> nonStandardIdentifier = h221NonStandard {
>> t35CountryCode = 181
>> t35Extension = 0
>> manufacturerCode = 18
>> }
>> data = 63 octets {
>> 82 84 b0 11 00 d4 4f 71 f1 6a 02 11 d9 aa f0 f5 ......Oq.j......
>> bd 2d 41 1d ea 01 83 27 02 04 00 a7 76 58 99 c4 .-A....'....vX..
>> 0e 00 61 00 73 00 7c 00 69 00 6e 00 74 00 65 00 ..a.s.|.i.n.t.e.
>> 72 00 70 00 6f 00 69 00 6e 00 74 00 32 00 35 r.p.o.i.n.t.2.5
>> }
>> }
>> replyAddress = ipAddress {
>> ip = 4 octets {
>> xx xx xx 93 ....
>> }
>> port = 1719
>> }
>> sourceInfo = 1 entries {
>> [0]=h323_ID 18 characters {
>> 0049 006e 0074 0065 0072 0070 006f 0069 Interpoi
>> 006e 0074 0047 004b 0042 0075 0063 0030 ntGKBuc0
>> 0030 0031 01
>> }
>> }
>> canMapAlias = TRUE
>> }
>> 2005/01/20 12:20:56.371 5 job.cxx(360) JOB Worker threads: 6
>> total - 6 busy, 0 idle
>> 2005/01/20 12:20:56.371 5 job.cxx(188) JOB Starting Job LRQ at
>> Worker thread 114696
>> 2005/01/20 12:20:56.371 1 RasSrv.cxx(328) RAS LRQ Received
>> 2005/01/20 12:20:56.372 5 Routing.h(125) ROUTING Checking policy
>> Explicit for the request LRQ 8177
>> 2005/01/20 12:20:56.372 5 Routing.h(125) ROUTING Checking policy
>> Internal for the request LRQ 8177
>> 2005/01/20 12:20:56.372 2 RasTbl.cxx(664) RASTBL Gateway 1523_endp
>> matched by prefix 074
>> 2005/01/20 12:20:56.372 4 RasTbl.cxx(1068) Prefix match for GW
>> xxx.xxx.xxx.152:1720
>> 2005/01/20 12:20:56.372 5 Routing.h(131) ROUTING Policy Internal
>> applied to the request LRQ 8177
>> 2005/01/20 12:20:56.374 2 RasSrv.cxx(373)
>> LCF|xxx.xxx.xxx.147|1523_endp|0744325669:dialedDigits|xxx.xxx.xxx.147;
>> 2005/01/20 12:20:56.375 6 yasocket.cxx(610) 127.0.0.1:33061 72 bytes
>> sent
>> 2005/01/20 12:20:56.375 3 RasSrv.cxx(219) RAS Send to
>> xxx.xxx.xxx.147:1719
>> locationConfirm {
>> requestSeqNum = 8177
>> callSignalAddress = ipAddress {
>> ip = 4 octets {
>> xx xx xx 17 ..w.
>> }
>> port = 0
>> }
>> rasAddress = ipAddress {
>> ip = 4 octets {
>> xx xx xx 17 ..w.
>> }
>> port = 1719
>> }
>> }
>> 2005/01/20 12:20:56.376 5 RasSrv.cxx(233) RAS Sent Successful
>> 2005/01/20 12:20:56.376 5 job.cxx(423) JOB Job LRQ deleted
>>
>>
>> --
>> Siderite <Siderite@xxxxx>
>
>
>
>-------------------------------------------------------
>This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
>Tool for open source databases. Create drag-&-drop reports. Save time
>by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
>Download a FREE copy at http://www.intelliview.com/go/osdn_nl
>
>_______________________________________________________
>
>List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
>Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
>Homepage: http://www.gnugk.org/
>
----
Home, no matter how far...
http://www.home.ro
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________________
List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/
