1ST PROBLEM: You have wrong order of things here - you should really take a look at the manual - there is an example how to do this correctly.
Basically, you need: [RasSrv::Neighbors] InterpointGKBuc001=CiscoGK
[Neighbor::InterpointGKBuc001]
what is pretty natural, as CiscoGK is only a type of neighbor and you can have multiple neighbors of this type.
2ND PROBLEM:
Maybe you hit some bug, I'll check the sources. Make also sure
that your gatekeeper is actually listening to the signalling port (1720 or 1721).
3RD PROBLEM: FileAcct will store accounting records only if a call is passing through the gatekeeper. If you are using direct mode and LRQ, the call will not go through the gatekeeper, rather directly to the termination gateway.
----- Original Message ----- From: "Siderite" <Siderite@xxxxx>
Sent: Thursday, January 20, 2005 11:58 AM
I am detailing a post (sent from another email address) to which Michal told me to add more information: As in the previous post I am trying to do 2 things:
I. get calls transfered by a Cisco gatekeeper to a Cisco gateway through the
GnuGK (GW1->CiscoGK->GnuGK->GW2)
II. get a true record of the calls that go through GnuGK
======================
To do that I followed the instructions in the manuals and configured things like this: CiscoGK has GnuGK set up as a remote zone (this config works with other gatekeepers so I don't think there is any problem here) GnuGk has CiscoGK set up as a neighbor
1ST PROBLEM:
the new neighbor config system doesn't work: [RasSrv::Neighbors] CiscoGK=InterpointGKBuc001
[Neighbor::CiscoGK] Host=xxx.xxx.xxx.147 AcceptPrefixes=* SendPrefixes=* ForwardHopCount=2 ForwardLRQ=Always ForwardResponse=1
This is the GnuGK config and the log says, immediately after starting
the gatekeeper:
2005/01/20 12:41:04.091 1 Neighbor.cxx(710) NB Can't get profile for neighbor CiscoGK
2005/01/20 12:41:04.091 1 Neighbor.cxx(159) NB Delete neighbor CiscoGK
I used the old system and thus configured the neighbor like this: [RasSrv::Neighbors] InterpointGKBuc001=193.230.176.147;
and it seems to be working.
Then I configured the GnuGK to be in routed mode. [RoutedMode] GKRouted=1 H245Routed=1
2ND PROBLEM:
When I send a call from GW1 it sends the LRQ to CiscoGK, then it goes to the GnuGK and then a LCF is issued. The LCF looks like this: locationConfirm { requestSeqNum = 8177 callSignalAddress = ipAddress { ip = 4 octets { xx xx xx 17 ..w. } port = 0 } rasAddress = ipAddress { ip = 4 octets { xx xx xx 17 ..w. } port = 1719 } }
The CallSignalAddress has port 0 !!!??? and the IP is the IP of GnuGK.
A solution is to remove the routed mode, even if I do need the control and information wealth that routed mode offers. Then the LCF looks like this: locationConfirm { requestSeqNum = 8193 callSignalAddress = ipAddress { ip = 4 octets { xx xx xx 98 .... } port = 1720 } rasAddress = ipAddress { ip = 4 octets { xx xx xx 17 ..w. } port = 1719 } } which is the correct way it should look, I guess, and the call is transfered.
3RD PROBLEM: I configured logging like this: [CallTable] GenerateUCCDR=1
[Gatekeeper::Acct] FileAcct=required;start,stop
[FileAcct] DetailFile=/usr/local/var/log/gnugk.detail.log StandardCDRFormat=1 ;CDRString=%g|%n|%d|%c|%s|%u|%{CallId}|%{ConfId}|%{setup-time}|%{connect-time}|%{disconnect-time}|%{caller-ip}|%{caller-port}|%{callee-ip}|%{callee-port}|%{src-info}|%{dest-info}|%{Calling-Station-Id}|%{Called-Station-Id}
The log file is generated, but nothing at all is written in the file.
Please help!
========================== detail gnugk config [routed mode] [Gatekeeper::Main] Fourtytwo=42 Name=gnugk
[GkStatus::Auth] rule=allow
[RoutedMode] GKRouted=1 H245Routed=1 ;AcceptNeighborsCalls=1 ;AcceptUnregisteredCalls=0 ;SupportNATedEndpoints=1 ;RemoveH245AddressOnTunneling=1 ;ForwardOnFacility=0
[Proxy] Enable=0 ;ProxyForNAT=1
[RasSrv::GWPrefixes] amir=074
[RasSrv::PermanentEndpoints] xxx.xxx.xxx.152=amir;074
[RasSrv::Neighbors] InterpointGKBuc001=xxx.xxx.xxx.147;
[RasSrv::LRQFeatures] NeighborTimeout=2 ForwardHopCount=2 CiscoGKCompatible=1 ;IncludeDestinationInfoInLCF=0
[CallTable] GenerateUCCDR=1
[Gatekeeper::Acct] FileAcct=required;start,stop
[FileAcct] DetailFile=/usr/local/var/log/gnugk.detail.log StandardCDRFormat=0 CDRString=%g|%n|%d|%c|%s|%u|%{CallId}|%{ConfId}|%{setup-time}|%{connect-time}|%{disconnect-time}|%{caller-ip}|%{caller-port}|%{callee-ip}|%{callee-port}|%{src-info}|%{dest-info}|%{Calling-Station-Id}|%{Called-Station-Id}
or
StandardCDRFormat=1
==============================
detail log [routed mode]:
2005/01/20 12:20:56.339 4 RasSrv.cxx(199) RAS Receiving on xxx.xxx.xxx.23:1718(Mcast)
2005/01/20 12:20:56.340 2 RasSrv.cxx(168) RAS Read from xxx.xxx.xxx.147:1719
2005/01/20 12:20:56.358 3 RasSrv.cxx(207) RAS
locationRequest {
requestSeqNum = 8177
destinationInfo = 1 entries {
[0]=dialedDigits "0744325669"
}
nonStandardData = {
nonStandardIdentifier = h221NonStandard {
t35CountryCode = 181
t35Extension = 0
manufacturerCode = 18
}
data = 63 octets {
82 84 b0 11 00 d4 4f 71 f1 6a 02 11 d9 aa f0 f5 ......Oq.j......
bd 2d 41 1d ea 01 83 27 02 04 00 a7 76 58 99 c4 .-A....'....vX..
0e 00 61 00 73 00 7c 00 69 00 6e 00 74 00 65 00 ..a.s.|.i.n.t.e.
72 00 70 00 6f 00 69 00 6e 00 74 00 32 00 35 r.p.o.i.n.t.2.5
}
}
replyAddress = ipAddress {
ip = 4 octets {
xx xx xx 93 ....
}
port = 1719
}
sourceInfo = 1 entries {
[0]=h323_ID 18 characters {
0049 006e 0074 0065 0072 0070 006f 0069 Interpoi
006e 0074 0047 004b 0042 0075 0063 0030 ntGKBuc0
0030 0031 01
}
}
canMapAlias = TRUE
}
2005/01/20 12:20:56.371 5 job.cxx(360) JOB Worker threads: 6 total - 6 busy, 0 idle
2005/01/20 12:20:56.371 5 job.cxx(188) JOB Starting Job LRQ at Worker thread 114696
2005/01/20 12:20:56.371 1 RasSrv.cxx(328) RAS LRQ Received
2005/01/20 12:20:56.372 5 Routing.h(125) ROUTING Checking policy Explicit for the request LRQ 8177
2005/01/20 12:20:56.372 5 Routing.h(125) ROUTING Checking policy Internal for the request LRQ 8177
2005/01/20 12:20:56.372 2 RasTbl.cxx(664) RASTBL Gateway 1523_endp matched by prefix 074
2005/01/20 12:20:56.372 4 RasTbl.cxx(1068) Prefix match for GW xxx.xxx.xxx.152:1720
2005/01/20 12:20:56.372 5 Routing.h(131) ROUTING Policy Internal applied to the request LRQ 8177
2005/01/20 12:20:56.374 2 RasSrv.cxx(373) LCF|xxx.xxx.xxx.147|1523_endp|0744325669:dialedDigits|xxx.xxx.xxx.147;
2005/01/20 12:20:56.375 6 yasocket.cxx(610) 127.0.0.1:33061 72 bytes sent
2005/01/20 12:20:56.375 3 RasSrv.cxx(219) RAS Send to xxx.xxx.xxx.147:1719
locationConfirm {
requestSeqNum = 8177
callSignalAddress = ipAddress {
ip = 4 octets {
xx xx xx 17 ..w.
}
port = 0
}
rasAddress = ipAddress {
ip = 4 octets {
xx xx xx 17 ..w.
}
port = 1719
}
}
2005/01/20 12:20:56.376 5 RasSrv.cxx(233) RAS Sent Successful
2005/01/20 12:20:56.376 5 job.cxx(423) JOB Job LRQ deleted
-- Siderite <Siderite@xxxxx>
------------------------------------------------------- This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting Tool for open source databases. Create drag-&-drop reports. Save time by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc. Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________________
List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
