As for the CDR accounting to a file, the solutions is very simple - read the
tutorial:
Currently supported accounting modules:
* FileAcct
A plain CDR text file logger. It outputs status line like CDR lines to a
specified text file. This module supports only stop accounting event.
Configuration settings are read from [FileAcct] section.
As you see. the FileAcct module supports ONLY STOP accounting event.
And you have:
> [Gatekeeper::Acct]
> FileAcct=required;start,stop
On Thursday 20 January 2005 12:58, Siderite wrote:
> I am detailing a post (sent from another email address) to which
> Michal told me to add more information:
> As in the previous post I am trying to do 2 things:
>
> I. get calls transfered by a Cisco gatekeeper to a Cisco gateway through
> the GnuGK (GW1->CiscoGK->GnuGK->GW2)
>
> II. get a true record of the calls that go through GnuGK
>
> ======================
>
> To do that I followed the instructions in the manuals and configured
> things like this:
> CiscoGK has GnuGK set up as a remote zone (this config works with other
> gatekeepers so I don't think there is any problem here)
> GnuGk has CiscoGK set up as a neighbor
>
> 1ST PROBLEM:
>
> the new neighbor config system doesn't work:
> [RasSrv::Neighbors]
> CiscoGK=InterpointGKBuc001
>
> [Neighbor::CiscoGK]
> Host=xxx.xxx.xxx.147
> AcceptPrefixes=*
> SendPrefixes=*
> ForwardHopCount=2
> ForwardLRQ=Always
> ForwardResponse=1
>
> This is the GnuGK config and the log says, immediately after starting
> the gatekeeper:
> 2005/01/20 12:41:04.091 1 Neighbor.cxx(710) NB Can't get profile for
> neighbor CiscoGK 2005/01/20 12:41:04.091 1 Neighbor.cxx(159) NB Delete
> neighbor CiscoGK
>
> I used the old system and thus configured the neighbor like this:
> [RasSrv::Neighbors]
> InterpointGKBuc001=193.230.176.147;
>
> and it seems to be working.
>
> Then I configured the GnuGK to be in routed mode.
> [RoutedMode]
> GKRouted=1
> H245Routed=1
>
> 2ND PROBLEM:
>
> When I send a call from GW1 it sends the LRQ to CiscoGK, then it goes to
> the GnuGK and then a LCF is issued. The LCF looks like this:
> locationConfirm {
> requestSeqNum = 8177
> callSignalAddress = ipAddress {
> ip = 4 octets {
> xx xx xx 17 ..w.
> }
> port = 0
> }
> rasAddress = ipAddress {
> ip = 4 octets {
> xx xx xx 17 ..w.
> }
> port = 1719
> }
> }
>
> The CallSignalAddress has port 0 !!!??? and the IP is the IP of GnuGK.
>
> A solution is to remove the routed mode, even if I do need the control
> and information wealth that routed mode offers. Then the LCF looks like
> this:
> locationConfirm {
> requestSeqNum = 8193
> callSignalAddress = ipAddress {
> ip = 4 octets {
> xx xx xx 98 ....
> }
> port = 1720
> }
> rasAddress = ipAddress {
> ip = 4 octets {
> xx xx xx 17 ..w.
> }
> port = 1719
> }
> }
> which is the correct way it should look, I guess, and the call is
> transfered.
>
> 3RD PROBLEM:
> I configured logging like this:
> [CallTable]
> GenerateUCCDR=1
>
> [Gatekeeper::Acct]
> FileAcct=required;start,stop
>
> [FileAcct]
> DetailFile=/usr/local/var/log/gnugk.detail.log
> StandardCDRFormat=1
> ;CDRString=%g|%n|%d|%c|%s|%u|%{CallId}|%{ConfId}|%{setup-time}|%{connect-ti
>me}|%{disconnect-time}|%{caller-ip}|%{caller-port}|%{callee-ip}|%{callee-por
>t}|%{src-info}|%{dest-info}|%{Calling-Station-Id}|%{Called-Station-Id}
>
> The log file is generated, but nothing at all is written in the file.
>
> Please help!
>
> ==========================
> detail gnugk config [routed mode]
> [Gatekeeper::Main]
> Fourtytwo=42
> Name=gnugk
>
> [GkStatus::Auth]
> rule=allow
>
> [RoutedMode]
> GKRouted=1
> H245Routed=1
> ;AcceptNeighborsCalls=1
> ;AcceptUnregisteredCalls=0
> ;SupportNATedEndpoints=1
> ;RemoveH245AddressOnTunneling=1
> ;ForwardOnFacility=0
>
> [Proxy]
> Enable=0
> ;ProxyForNAT=1
>
> [RasSrv::GWPrefixes]
> amir=074
>
> [RasSrv::PermanentEndpoints]
> xxx.xxx.xxx.152=amir;074
>
> [RasSrv::Neighbors]
> InterpointGKBuc001=xxx.xxx.xxx.147;
>
> [RasSrv::LRQFeatures]
> NeighborTimeout=2
> ForwardHopCount=2
> CiscoGKCompatible=1
> ;IncludeDestinationInfoInLCF=0
>
> [CallTable]
> GenerateUCCDR=1
>
> [Gatekeeper::Acct]
> FileAcct=required;start,stop
>
> [FileAcct]
> DetailFile=/usr/local/var/log/gnugk.detail.log
> StandardCDRFormat=0
> CDRString=%g|%n|%d|%c|%s|%u|%{CallId}|%{ConfId}|%{setup-time}|%{connect-tim
>e}|%{disconnect-time}|%{caller-ip}|%{caller-port}|%{callee-ip}|%{callee-port
>}|%{src-info}|%{dest-info}|%{Calling-Station-Id}|%{Called-Station-Id}
>
> or
>
> StandardCDRFormat=1
>
> ==============================
>
> detail log [routed mode]:
> 2005/01/20 12:20:56.339 4 RasSrv.cxx(199) RAS Receiving on
> xxx.xxx.xxx.23:1718(Mcast) 2005/01/20 12:20:56.340 2
> RasSrv.cxx(168) RAS Read from xxx.xxx.xxx.147:1719 2005/01/20
> 12:20:56.358 3 RasSrv.cxx(207) RAS
> locationRequest {
> requestSeqNum = 8177
> destinationInfo = 1 entries {
> [0]=dialedDigits "0744325669"
> }
> nonStandardData = {
> nonStandardIdentifier = h221NonStandard {
> t35CountryCode = 181
> t35Extension = 0
> manufacturerCode = 18
> }
> data = 63 octets {
> 82 84 b0 11 00 d4 4f 71 f1 6a 02 11 d9 aa f0 f5 ......Oq.j......
> bd 2d 41 1d ea 01 83 27 02 04 00 a7 76 58 99 c4 .-A....'....vX..
> 0e 00 61 00 73 00 7c 00 69 00 6e 00 74 00 65 00 ..a.s.|.i.n.t.e.
> 72 00 70 00 6f 00 69 00 6e 00 74 00 32 00 35 r.p.o.i.n.t.2.5
> }
> }
> replyAddress = ipAddress {
> ip = 4 octets {
> xx xx xx 93 ....
> }
> port = 1719
> }
> sourceInfo = 1 entries {
> [0]=h323_ID 18 characters {
> 0049 006e 0074 0065 0072 0070 006f 0069 Interpoi
> 006e 0074 0047 004b 0042 0075 0063 0030 ntGKBuc0
> 0030 0031 01
> }
> }
> canMapAlias = TRUE
> }
> 2005/01/20 12:20:56.371 5 job.cxx(360) JOB Worker threads: 6 total
> - 6 busy, 0 idle 2005/01/20 12:20:56.371 5
> job.cxx(188) JOB Starting Job LRQ at Worker thread 114696 2005/01/20
> 12:20:56.371 1 RasSrv.cxx(328) RAS LRQ Received
> 2005/01/20 12:20:56.372 5 Routing.h(125) ROUTING Checking policy
> Explicit for the request LRQ 8177 2005/01/20 12:20:56.372 5
> Routing.h(125) ROUTING Checking policy Internal for the request LRQ 8177
> 2005/01/20 12:20:56.372 2 RasTbl.cxx(664) RASTBL Gateway 1523_endp
> matched by prefix 074 2005/01/20 12:20:56.372 4
> RasTbl.cxx(1068) Prefix match for GW xxx.xxx.xxx.152:1720 2005/01/20
> 12:20:56.372 5 Routing.h(131) ROUTING Policy Internal applied to the
> request LRQ 8177 2005/01/20 12:20:56.374 2 RasSrv.cxx(373)
> LCF|xxx.xxx.xxx.147|1523_endp|0744325669:dialedDigits|xxx.xxx.xxx.147;
> 2005/01/20 12:20:56.375 6 yasocket.cxx(610) 127.0.0.1:33061 72 bytes
> sent 2005/01/20 12:20:56.375 3 RasSrv.cxx(219) RAS Send to
> xxx.xxx.xxx.147:1719 locationConfirm {
> requestSeqNum = 8177
> callSignalAddress = ipAddress {
> ip = 4 octets {
> xx xx xx 17 ..w.
> }
> port = 0
> }
> rasAddress = ipAddress {
> ip = 4 octets {
> xx xx xx 17 ..w.
> }
> port = 1719
> }
> }
> 2005/01/20 12:20:56.376 5 RasSrv.cxx(233) RAS Sent Successful
> 2005/01/20 12:20:56.376 5 job.cxx(423) JOB Job LRQ deleted
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________________
List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/
