> Hi, > > the situation is: > > GnuGK 2.2.1 running in H225/H245 routed mode. > Cisco AS 5350 and Cisco Call Manager are configured as permanent endpoints > there. > There is no ringback when calling from the AS5350 to a CCM IP phone. > On the GnuGK debug I see how the CCM sends ALERTG messahe with Progress > Indicator = 8. Later, on the Cisco AS5350 (with debug cch323 h225) I see > how an ALERT message arrives from GnuGK with Progress Indicator = 0. > > What could be the reason for that? Your symptom does not match what you are observing with the Progress Indicator. If the AS5350 receives 0, that would mean that there is no in-band information, so it should play a locally generated ringback. If the AS5350 receives 8, then it should play the RTP stream. A typical cause of no ringback is the opposite of what you are seeing -- the progress indicator shows in-band information, but there is no audio to play. --Stewart ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
