Re: Addressing aliases to a particular GW

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A solution can be to use RADIUS based routing, if you are familiar
with RADIUS. But that will be like using a big cannon to shoot a pigeon;)

----- Original Message ----- From: "Antonio Tuzzi" <atuzzi@xxxxxxxxxxx>
Sent: Thursday, November 25, 2004 9:57 AM



What's the correct configuration (if exists)
to send calls from a set of aliases to a particular GW (outgoing calls)

The selection is based on the subscription and not on the dialed number!

Example

A) I have GW1 and GW2 registered as Gateways on my GK1
B) I want that aliases (registered on the GK1) within range "0->4" use
the GW1
C) range "5->9" should use GW2.

Thank you
at



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/


_______________________________________________________

List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/

[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux