Hello GnuGK users, Please help me find a solution to a very annoying problem. I'm using gnugk 2.0.8 to terminate calls from an AudioCodes GW to a Cisco 3660 GW. Until yesterday I used IOS 12.2(7a) for Cisco and everything worked just fine. Now I'm using IOS 12.3(10) for Cisco (I needed this update to solve some issues on my router). The problem is I cannot make more than 1 call simultaneous from AudioCodes to Cisco, GnuGK is dropping the second call to Cisco if another call is online between gws. I made some research and found: "The problem is that gnugk doesn't support more than 1 call in one signaling channel. Cisco with IOS >= 12.2 tries to put second call in the same tcp connection as first one.". A solution for this was to configure Cisco machine as follows: voice service voip h323 session transport tcp calls-per-connection 1 Done it....but nothing changes. I'm still not able to place more than 1 call simultaneous from AudioCodes to Cisco. The second call is dropped by GnuGK. Please help because I cannot make a rollback to Cisco IOS and I need also GnuGK with minimum 8 calls simultaneous from AC to Cisco. Thanks in advance. -- Vasile MITREA Netpoint Technical Support 20, Dr. Panait Iatropol st. Bucharest, Romania Telefon: +40 21 4116277 / +40 724 377061 Telefax: +40 21 4116285 e-mail: mailto:vasile.mitrea@xxxxxxxxxxx homepage: http://www.netpoint.ro ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
