Re: Bearer capability

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is not the gatekeeper issue, but your originating/terminating endpoint issue.
Proper configuration can prevent it.


----- Original Message ----- From: "Rafat Subhan" <rafat@xxxxxxxxxxxxxxx>
Sent: Wednesday, September 29, 2004 9:47 AM



http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a0080093f62.shtml

With regards to above Cisco document, I also encountered same, as gatekeeper is not setting setup message accordingly therefore Gatekeeper is getting 65 error code from gateway which means bearer capability is not set accordingly.

To run GK successfully in production environment, atleast it shud be compatible with major cisco versions.



-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl

_______________________________________________________

List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/

[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux